All commands

All commands (14,187)

sorted by

This is a command that I find myself using all the time. It works like regular grep, but returns the paragraph containing the search pattern instead of just the line. It operates on files or standard input. grepp <PATTERN> <FILE> or <SOMECOMMAND> | grepp <PATTERN> Show Sample Output

grepp() { [ $# -eq 1 ] && perl -00ne "print if /$1/i" || perl -00ne "print if /$1/i" < "$2";}

eightmillion · 2010-01-12 04:30:15 13

Edit video by cutting the part you like without transcoding.

Examples: The following will take frames starting at 15.2 seconds for a total of 45.9 seconds: mencoder -ss 15.2 -endpos 30.7 -oac copy -ovc copy mymovie.avi -o myeditedmovie.avi Keep in mind -endpos is the total time, i.e. the output video in this is 3 minutes 3 seconds in length: mencoder -ss 1 minute -endpos 2 minutes 3 seconds -oac copy -ovc copy mymovie.avi -o myeditedmovie.avi
This is sample output - yours may be different.
8

mencoder -ss <start point> -endpos <time from start point> -oac copy -ovc copy <invid> -o <outvid>

Buzzcp · 2010-01-11 22:59:13 5
Show the command line of a process that use a specific port (ubuntu)

A way not so simple but functional for print the command for the process that's listening a specific port. I got the pid from lsof because I think it's more portable but can be used netstat netstat -tlnp Show Sample Output
This is sample output - yours may be different.
```
java -Dcom.sun.management.jmxremote -Xmx1024m -XX:MaxPermSize=300m -server -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8885 -jar /oc4j/j2ee/home/oc4j.jar 
```
0

port=8888;pid=$(lsof -Pan -i tcp -i udp | grep ":$port"|tr -s " " | cut -d" " -f2); ps -Afe|grep "$pid"|grep --invert-match grep | sed "s/^$[^ ]*[ ]*$\{7\}$.*$$/\2/g"

glaudiston · 2010-01-11 17:49:22 8
Change pidgin status

Changes pidgin status using its dbus interface. The status code can be obtained using command #4543.
This is sample output - yours may be different.
1

dbus-send --print-reply --dest=im.pidgin.purple.PurpleService /im/pidgin/purple/PurpleObject im.pidgin.purple.PurpleInterface.PurpleSavedstatusActivate int32:<WANTED STATE>

unixApe · 2010-01-11 17:35:23 4
Get current pidgin status

Returns code of current status of pidgin accounts via dbus interface Show Sample Output
This is sample output - yours may be different.
```
method return sender=:1.14 -> dest=:1.368 reply_serial=2
   int32 <SAVED STATE ID>
```
-1

dbus-send --print-reply --dest=im.pidgin.purple.PurpleService /im/pidgin/purple/PurpleObject im.pidgin.purple.PurpleInterface.PurpleSavedstatusGetCurrent

unixApe · 2010-01-11 17:30:07 3
Lookup your own IPv4 address
This is sample output - yours may be different.
5

dig +short myip.opendns.com @resolver1.opendns.com

grawity · 2010-01-11 17:00:32 8
Unlock your KDE4 session remotely (for boxes locked by KDE lock utility)

For KDE 4.2.* with plasma overlay activated I use this.
This is sample output - yours may be different.
0

qdbus org.kde.krunner_lock /MainApplication quit; qdbus org.kde.plasma-overlay /MainApplication quit

unixmonkey7806 · 2010-01-11 15:10:07 5
Find which process is using a port on Solaris

My old Solaris server does not have lsof, so I have to use pfiles.
This is sample output - yours may be different.
0

ps -ef | grep user | awk '{print $2}' | while read pid; do echo $pid ; pfiles $pid| grep portnum; done

sharfah · 2010-01-11 12:34:51 4
Execute a PHP script every 30 minutes using crontab

Just put this line in a file that resides in your /etc/cron.d/ folder, and you're set. The -q option is used to suppress php headers.
This is sample output - yours may be different.
-3

0,30 * * * * php -q /address/to/script.php

dotanmazor · 2010-01-11 10:44:13 6
This command will shorten any URL the user inputs. What makes this command different is that it utilizes 5 different services and gives you 5 different outputs.

This command will shorten any URL the user inputs. What makes this command different is that it utilizes 5 different services and gives you 5 different outputs: is.gd, bit.ly, u.nu, geekology.co.za, and tinyurl. curl -s http://tinyurl.com/create.php?url=$1 \ | sed -n 's/.*$http:\/\/tinyurl.com\/[a-z0-9][a-z0-9]*$.*/\1/p' \ | uniq ; curl -s http://bit.ly/?url=$1 \ | sed -n 's/.*$shortened-url" value="http:\/\/bit.ly\/[a-zA-Z0-9][a-zA-Z0-9]*$.*/\1/p' \ | sed -n 's/.*$http:\/\/bit.ly\/[a-zA-Z0-9][a-zA-Z0-9]*$.*/\1/p' \ | uniq ; curl -s http://geekology.co.za/shortii/create.php?u=$1 \ | sed -n 's/.*$http:\/\/geekology.co.za\/[a-z0-9][a-z0-9]*$.*/\1/p' \ | uniq ; curl -s http://u.nu/unu-api-simple?url=$1 \ | sed -n 's/.*$http:\/\/u.nu\/[a-z0-9][a-z0-9]*$.*/\1/p' \ | uniq ; curl -s http://is.gd/api.php?longurl=$1 \ | sed -n 's/.*$http:\/\/is.gd\/[a-z0-9][a-z0-9]*$.*/\1/p' \ | uniq echo ""
This is sample output - yours may be different.
0

curl -s http://tinyurl.com/create.php?url=$1 \ | sed -n 's/.*$http:\/\/tinyurl.com\/[a-z0-9][a-z0-9]*$.*/\1/p' \ | uniq ; curl -s http://bit.ly/?url=$1 \ | sed -n 's/.*\(shortened-url"...............

o0110o · 2010-01-11 01:11:27 7
A command to post a message and an auto-shortened link to Twitter. The link shortening service is provide by TinyURL.

A command to post a message and an auto-shortened link to Twitter. The link shortening service is provided by TinyURL.
This is sample output - yours may be different.
1

curl --user "USERNAME:PASSWORD" -d status="MESSAGE_GOES_HERE $(curl -s http://tinyurl.com/api-create.php?url=URL_GOES_HERE)" -d source="cURL" http://twitter.com/statuses/update.json -o /dev/null

o0110o · 2010-01-11 00:59:13 11
How many Linux and Windows devices are on your network?

Shows how many Windows and Linux devices are on your network. May add support for others, but that's all that are on my network right now. Show Sample Output
This is sample output - yours may be different.
```
3 Linux device(s)
2 Window(s) devices
```
3

sudo nmap -F -O 192.168.1.1-255 | grep "Running: " > /tmp/os; echo "$(cat /tmp/os | grep Linux | wc -l) Linux device(s)"; echo "$(cat /tmp/os | grep Windows | wc -l) Window(s) devices"

matthewbauer · 2010-01-10 03:09:56 5
Display $PATH with one line per entry

Display the $PATH with one line per entry, in a pager. Show Sample Output
This is sample output - yours may be different.
```
/home/nicoulaj/bin
/usr/local/sbin
/usr/local/bin
/usr/sbin
/usr/bin
/sbin
/bin
/usr/games
(END) 
```
0

echo -e ${PATH//:/\\n} | less

nicoulaj · 2010-01-09 23:25:02 4
hexadecimal2decimal
This is sample output - yours may be different.
-2

printf "%d\n" \0x64

4Aiur · 2010-01-09 02:50:50 3
Prevent overwriting file when using redirection

If you set noclobber to on, bash won't allow redirection to overwrite existing files . set -o noclobber command turn the option on (default it s off ) . You can still append information but not overwrite the file .to turn it back off use : $ set +o noclobber . I use it because i overwrite a file by accident , after thought , content of the file was very important , creating a one more file mean nothing for my hard disk (we are not anymore on the 64 k memory time) , but content of file is far much important . What we call exeprience :( Show Sample Output
This is sample output - yours may be different.
```
gnu@robby:/tmp$ set -o noclobber
gnu@robby:/tmp$ cat  tesk
dffd
gnu@robby:/tmp$ cat > tesk
bash: tesk : impossible d'?craser le fichier existant
gnu@robby:/tmp$ cat  tesk
dffd
gnu@robby:/tmp$ cat >> tesk
fdf
gnu@robby:/tmp$ cat  tesk
dffd
fdf
gnu@robby:/tmp$ 
```
2

set -o noclobber

eastwind · 2010-01-08 21:06:44 7
Poor man's ntpdate

If you don't have netcat, you can use curl.
This is sample output - yours may be different.
1

date -s "`curl -sI www.example.com | sed -n 's/^Date: //p'`"

putnamhill · 2010-01-08 21:05:41 4
sirve para ver la salida de un comando en pantalla y al mismo tiempo guardar la salida en un fichero
This is sample output - yours may be different.
-6

find / -name *.conf | tee salida

dvinchi666 · 2010-01-08 20:53:37 3
Show recent earthquakes in Bay Area

To see only earthquakes for today, add another pipe to egrep "`date '+%Y/%m/%d'`" Show Sample Output
This is sample output - yours may be different.
```
 4.1  2010/01/07 10:09:35 37.481N 121.799W 11.0   10 km ( 6 mi) ENE of Milpitas, CA
 3.8  2010/01/08 11:48:50 37.478N 121.794W  8.1   10 km ( 6 mi) ENE of Milpitas, CA
 3.0  2010/01/06 23:09:00 37.410N 121.755W  9.1    8 km ( 5 mi) NE  of Alum Rock, CA
```
1

lynx --width=200 --dump 'http://quake.usgs.gov/recenteqs/Maps/San_Francisco_eqs.htm'|sed -ne '/MAG.*/,/^References/{;s/\[[0-9][0-9]*\]//;1,/h:m:s/d;/Back to map/,$d;/^$/d;/^[ \t][ \t]*[3-9]\.[0-9][0-9]*[ \t][ \t]*/p; }'|sort -k1nr

KevinM · 2010-01-08 20:52:28 3
Poor man's ntpdate

Good when firewalled and only in need of a reasonable accurate time. Use a fast responding web server.
This is sample output - yours may be different.
0

date -s "$(echo -e "HEAD / HTTP/1.0\n" | nc www.example.com 80 | sed -ne 's/^Date: $.*$$/\1/p')"

tomhol · 2010-01-08 20:05:00 9
Every Nth line position # (AWK)

A better way to show the file lines 3n + 1
This is sample output - yours may be different.
4

awk 'NR%3==1' file

point_to_null · 2010-01-08 18:52:24 9
get bofh excuse from a trusted source :-)
This is sample output - yours may be different.
7

telnet bofh.jeffballard.us 666

bubo · 2010-01-08 18:08:39 10
File browser

Simple file browser with dmenu, ls, and xdg-open.
This is sample output - yours may be different.
1

xdg-open $(ls . | dmenu)

matthewbauer · 2010-01-08 17:16:28 4
Find all files <10MB and sum up their size

files
This is sample output - yours may be different.
0

i=0; for f in $(find ./ -size -10M -exec stat -c %s {} \; ); do i=$(($i + $f)); done; echo $i

dakira · 2010-01-08 15:47:35 3
Prints line numbers
This is sample output - yours may be different.
0

awk '{print NR,$0}'

4Aiur · 2010-01-08 08:00:34 3
Every Nth line position # (AWK)

awk extract every nth line. Generic is: awk '{if (NR % LINE == POSITION) print $0}' foo where "last" position is always 0 (zero). Show Sample Output
This is sample output - yours may be different.
```
$ awk '{if (NR % 3 == 1) print $0}' blah1
1
4
7

$ awk '{if (NR % 3 == 2) print $0}' blah1
2
5
8

$ awk '{if (NR % 3 == 0) print $0}' blah1
3
6
9
```
-1

awk '{if (NR % 3 == 1) print $0}' foo > foo_every3_position1; awk '{if (NR % 3 == 2) print $0}' foo > foo_every3_position2; awk '{if (NR % 3 == 0) print $0}' foo > foo_every3_position3

oshazard · 2010-01-08 04:20:06 4
‹ First < 410 411 412 413 414 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Look up a unicode character by name

No need for further filedes or substitution for splitting. Simply use read a b

Typing the current date ( or any string ) via a shortcut as if the keys had been actually typed with the hardware keyboard in any application.

That works in all softs, CLI or GUI... I don't want to waste time to all the time typing the same stuff . So, I have that command in my window manager shortcuts ( meta+l ). All the window managers have editable shortcuts AFAIK. If not, or you don't want to use it that way, you can easily use the xbindkeys soft. I you're using kde4, you can run : $ systemsettings then open "inputs actions" and create a new shortcut. For Gnome take a look there : http://www.cyberciti.biz/faq/howto-create-keyboard-shortcuts-in-gnome/ A more advanced one, with strings and newlines : $ xvkbd -xsendevent -text "---8

Press ctrl+r in a bash shell and type a few letters of a previous command

In the sample output, I pressed ctrl+r and typed the letters las. I can't imagine how much typing this has saved me.

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

detect the fastest ldap server on a intranet

This command line detect ldap hosts, by mandatory dns entry, then ping them to detect response average. based on ping response average it sorts and print the faster server in first output line

Retry the previous command until it exits successfully

Find dead symbolic links

-L tells find to follow symbolic links, so -type l will only return links it can't follow (i.e., those that are broken).

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Connect to SMTP server using STARTTLS

Allows you to connect to an SMTP server over TLS, which is useful for debugging SMTP sessions. (Much like telnet to 25/tcp). Once connected you can manually issue SMTP commands in the clear (e.g. EHLO)

Execute a command with a timeout

I like much more the perl solution, but without using perl. It launches a backgroup process that will kill the command if it lasts too much. A bigger function: check_with_timeout() { [ "$DEBUG" ] && set -x COMMAND=$1 TIMEOUT=$2 RET=0 # Launch command in backgroup [ ! "$DEBUG" ] && exec 6>&2 # Link file descriptor #6 with stderr. [ ! "$DEBUG" ] && exec 2> /dev/null # Send stderr to null (avoid the Terminated messages) $COMMAND 2>&1 >/dev/null & COMMAND_PID=$! [ "$DEBUG" ] && echo "Background command pid $COMMAND_PID, parent pid $$" # Timer that will kill the command if timesout sleep $TIMEOUT && ps -p $COMMAND_PID -o pid,ppid |grep $$ | awk '{print $1}' | xargs kill & KILLER_PID=$! [ "$DEBUG" ] && echo "Killer command pid $KILLER_PID, parent pid $$" wait $COMMAND_PID RET=$? # Kill the killer timer [ "$DEBUG" ] && ps -e -o pid,ppid |grep $KILLER_PID | awk '{print $1}' | xargs echo "Killing processes: " ps -e -o pid,ppid |grep -v PID | grep $KILLER_PID | awk '{print $1}' | xargs kill wait sleep 1 [ ! "$DEBUG" ] && exec 2>&6 6>&- # Restore stderr and close file descriptor #6. return $RET }

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by