Hide

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again.

Delete that bloated snippets file you've been using and share your personal repository with the world. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.


If you have a new feature suggestion or find a bug, please get in touch via http://commandlinefu.uservoice.com/

Get involved!

You can sign-in using OpenID credentials, or register a traditional username and password.

First-time OpenID users will be automatically assigned a username which can be changed after signing in.

Hide

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

Hide

News

2011-03-12 - Confoo 2011 presentation
Slides are available from the commandlinefu presentation at Confoo 2011: http://presentations.codeinthehole.com/confoo2011/
2011-01-04 - Moderation now required for new commands
To try and put and end to the spamming, new commands require moderation before they will appear on the site.
2010-12-27 - Apologies for not banning the trolls sooner
Have been away from the interwebs over Christmas. Will be more vigilant henceforth.
2010-09-24 - OAuth and pagination problems fixed
Apologies for the delay in getting Twitter's OAuth supported. Annoying pagination gremlin also fixed.
Hide

Tags

Hide

Functions

All commands from sorted by
Terminal - All commands - 11,484 results
lsof -nP +p 24073 | grep -i listen | awk '{print $1,$2,$7,$8,$9}'
kill_daemon() { echo "Daemon?"; read dm; kill -15 $(netstat -atulpe | grep $dm | cut -d '/' -f1 | awk '{print $9}') }; alias kd='kill_daemon
2009-05-26 20:39:56
User: P17
-5

Just find out the daemon with $ netstat -atulpe. Then type in his name and he gets the SIGTERM.

cal -y | tr '\n' '|' | sed "s/^/ /;s/$/ /;s/ $(date +%e) / $(date +%e | sed 's/./#/g') /$(date +%m | sed s/^0//)" | tr '|' '\n'
ip route show dev eth0 | awk '{print $7}'
2009-05-26 20:29:54
User: P17
Functions: awk route
Tags: IP
2
ip address show | grep eth0 | sed '1d' | awk '{print $2}'

does the same, but shows network-prefix.

tar -zcvpf backup_`date +"%Y%m%d_%H%M%S"`.tar.gz `find <target> -atime +5` 2> /dev/null | xargs rm -fr ;
2009-05-26 17:15:52
User: angleto
Functions: rm tar xargs
Tags: backup
7

create an archive of files with access time older than 5 days, and remove original files.

netstat -4tnape
readlink -f /proc/<pid>/cmdline
2009-05-26 10:09:03
User: naseer
Functions: readlink
-1

Uses the pid to get the full path of the process. Useful when you do not which command got picked from the path

netstat -taupe
2009-05-25 12:46:38
User: farwarx
Functions: netstat
-8

Affiche des infos detaillees sur vos connexions reseaux.

Port en ?coute, protocole, paquets, adresses, ustilisateur, PID etc...

mplayer -vo caca foo.avi
2009-05-25 09:29:24
User: farwarx
-11

Permet de lire une video dans une console, meme sans interface graphique.

Interet limite, mais a connaitre au cas ou.

mv $1 $2 && ln -s $2/$(basename $1) $(dirname $1)
sed -e's/%\([0-9A-F][0-9A-F]\)/\\\\\x\1/g' | xargs echo -e
2009-05-25 05:37:44
User: mohan43u
Functions: echo sed xargs
10
echo "http%3A%2F%2Fwww.google.com" | sed -e's/%\([0-9A-F][0-9A-F]\)/\\\\\x\1/g' | xargs echo -e

http://www.google.com

Works under bash on linux. just alter the '-e' option to its corresponding equivalence in your system to execute escape characters correctly.

mplayer -af scaletempo -speed 1.5 file.avi
2009-05-24 08:06:28
User: elementa13
2

Pitch-correct play speed with mplayer. You can also use [] and {} keys to change play speed on-the-fly.

ffmpeg -i source_movie.flv -vcodec mpeg2video target_video.m2v -acodec copy target_audio.mp3
2009-05-23 23:52:51
User: dcabanis
4

rips the audio and video stream of a movie. The two streams are stored separately.

ffmpeg -i source_audio.mp3 -itsoffset 00:00:10.2 -i source_video.m2v target_video.flv
2009-05-23 23:47:41
User: dcabanis
4

This assumes that there is a 10.2 sec delay between the video and the audio (delayed).

To extract the original video into a audio and video composites look at the command on extracting audio and video from a movie

ffmpeg -i mymovie.mpg -ar 22050 -acodec libmp3lame -ab 32K -r 25 -s 320x240 -vcodec flv mytarget.flv
2009-05-23 23:39:46
User: dcabanis
2

Takes an mpeg video and coverts it to a youtube compatible flv file.

The -r 25 sets the frame rate for PAL, for NTSC use 29.97

ffmpeg -i source.flv -vn acodec copy destination.mp3
2009-05-23 23:34:32
User: dcabanis
2

-vn removes tha video content, the copy option tells ffmpeg to use the same codec for generating the output

lame -h -V 6 track9.wav track9.mp3
2009-05-23 23:27:20
User: dcabanis
-1

The quality ranges between 0 to 9, with the smaller number indicates a higher quality file but bigger too.

mplayer -fs cdda://9 -ao pcm:file=track9.wav
2009-05-23 23:23:45
User: dcabanis
3

Using mplayer to extract audio file from a CD

diff -uw <(fmt -1 {file1, file2})
2009-05-23 03:11:08
User: sunny256
Functions: diff fmt
Tags: bash diff
3

It can be hard to spot differences in reformatted files, because of all the diff noise created by word wrapped lines. This command removes all the noise and performs a word-by-word diff. To ignore empty lines, add -B to the diff command. Also, if this is something you do often, you might want to check out the wdiff(1) program.

Type "c-a b" in gnu screen after updating your .screenrc (See Description below).
2009-05-23 02:10:12
User: deeelwy
Functions: screen
5

This command will let you just type c-a b (which means press 'ctrl' then 'a' then 'b'), and screen will save your copy buffer to /tmp/screen-exchange, and then execute xsel to copy the contents of that file into the system's X clipboard.

1. Install Conrad Parker's xsel from http://www.vergenet.net/~conrad/software/xsel/

2. Add these lines to your .screenrc

# Add cool line to make copying to x clipboard possible.

# This binds C-a b to copy screen's copy buffer to the system clipboard.

bind b eval writebuf 'exec /bin/sh -c "xsel -i -b < /tmp/screen-exchange"' 'exec /bin/sh -c "killall xsel"'

3. Restart screen.

4. Test it by typing c-a [ to enter copy mode.

5. Select some text using vi movement keys (h, j, k, l, etc...) and starting your selection by hitting the space bar, moving with vi movement keys, and then ending your selection with the space bar.

6. Type C-a b, and screen will use xsel to copy your screen copy buffer to the system's X clipboard buffer.

7. Then you can paste the screen copy buffer into any X program.

Note: If you're using Mac OSX, you can use pbcopy instead of xsel.

Also Note: The second exec in the .screenrc file, which runs killall on xsel, is necessary, because even when you redirect a file to xsel, xsel waits for you to press ctrl-c to kill it, and have it stop waiting for more input. Since xsel forces screen to wait, and I don't want to press ctrl-c, I send the equivalent of ctrl-c with killall causing xsel to write /tmp/screen-exchange to the X clipboard, and then exit. It's a hack, but it works. If you know how to get this to work without a lame hack leave a comment explaining how.

cpp /usr/include/stdio.h | grep -v '^#' | grep -v '^$' | less
2009-05-22 22:40:25
User: mohan43u
Functions: cpp grep
4

will display typedefs, structs, unions and functions declared in 'stdio.h'(checkout _IO_FILE structure). It will be helpful if we want to know what a particular header file will offer to us. Command 'cpp' is GNU's C Preprocessor.

su -c "truecrypt --non-interactive truecrypt-file cryptshare -p PASSWORD"
2009-05-22 21:11:29
User: tatwright
Functions: su
0

This is useful for use in scripts.

Note that this will leak your password to ps, so this shouldn't be used on shared machines. Use key files for this

scanimage -d mustek_usb --resolution 100 --mode Color > image.pnm
2009-05-22 14:00:05
User: Giancarlo
Functions: scanimage
2

you have to replace "mustek_usb" with the scanner found by `scanimage -l`

lame --mp3input -m m --resample 24 input.mp3
2009-05-22 13:58:03
User: Giancarlo
2

Useful if you have to put some mp3 files into mobile devices (ie mobile phones with no much memory)

ffmpeg -i input.flv -f mp3 -vn -acodec copy ouput.mp3