Commands using awk sorted by votes

Commands using awk (1,418)

sorted by

netstat -p recoded (totaly useless..)

Ok so it's rellay useless line and I sorry for that, furthermore that's nothing optimized at all... At the beginning I didn't managed by using netstat -p to print out which process was handling that open port 4444, I realize at the end I was not root and security restrictions applied ;p It's nevertheless a (good ?) way to see how ps(tree) works, as it acts exactly the same way by reading in /proc So for a specific port, this line returns the calling command line of every thread that handle the associated socket
This is sample output - yours may be different.
-5

p=$(netstat -nate 2>/dev/null | awk '/LISTEN/ {gsub (/.*:/, "", $4); if ($4 == "4444") {print $8}}'); for i in $(ls /proc/|grep "^[1-9]"); do [[ $(ls -l /proc/$i/fd/|grep socket|sed -e 's|.*\[$.*$\]|\1|'|grep $p) ]] && cat /proc/$i/cmdline && echo; done

j0rn · 2009-04-30 12:39:48 644
Kill a daemon by name, not by PID

Just find out the daemon with $ netstat -atulpe. Then type in his name and he gets the SIGTERM.
This is sample output - yours may be different.
-5

kill_daemon() { echo "Daemon?"; read dm; kill -15 $(netstat -atulpe | grep $dm | cut -d '/' -f1 | awk '{print $9}') }; alias kd='kill_daemon

P17 · 2009-05-26 20:39:56 7
To print a specific line from a file

I don't know if it's better but works fine :)
This is sample output - yours may be different.
-5

awk '{if (NR == 3) print}' <file>

yooreck · 2009-10-19 15:58:09 5
search for and kill a process in one blow
This is sample output - yours may be different.
-5

ps aux|grep -i [p]rocessname|awk '{ print $2 }'|xargs kill

billcarroll · 2010-04-10 18:42:27 17
How many lines does the passwd file have?
This is sample output - yours may be different.
-5

awk 'END {print NR}' /etc/passwd

Leo_Gutierrez · 2011-06-23 00:33:40 3
Print only the odd lines of a file
This is sample output - yours may be different.
-6

awk '{if (NR % 2 == 1) print $0}' file.txt

twopoint718 · 2009-02-05 18:43:19 24
Check if Fail2Ban is Running

Check if Fail2Ban is running on the system and alert it with a message in the terminal Show Sample Output
This is sample output - yours may be different.
```
[INFO] Fail2Ban is not running

or:

[INFO] Fail2Ban is running and the PID is 3557
```
-6

FAIL2BAN=`ps ax | grep fail2ban | grep -v grep | awk {'print $1'}` && if [ -n "$FAIL2BAN" ]; then printf "\n[INFO] Fail2Ban is running and the PID is %s\n\n" $FAIL2BAN; else printf "\n [INFO] Fail2Ban is not running\n\n"; fi

fmdlc · 2009-02-11 04:36:49 8
kill some pids without specific pid

search_criteria = what do you want to kill pid = pid of you dont kill
This is sample output - yours may be different.
-6

kill -9 `ps aux | grep "search_criteria" | awk '{if ($2 != pid) print $2}'`

ozgurkuru · 2010-09-16 08:52:59 6
Kill any process with one command using program name

Removed unneeded grep -v by making the initial grep unable to match itself.
This is sample output - yours may be different.
-6

ps -ef | grep [j]boss | awk '{print $2}'|xargs kill -9

utoxin · 2010-09-30 15:55:41 3
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-6

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:46 4
ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}
This is sample output - yours may be different.
-6

ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}

pepin · 2015-03-21 21:25:07 11
This is a nice way to kill processes.. the example below is for firefox!!! substitute firefox for whatever the process name is...

This is a nice way to kill processes.. the example here is for firefox!!! substitute firefox for whatever the process name is... Show Sample Output
This is sample output - yours may be different.
```
kill -9 7491 
kill -9 7506 
kill -9 7434 
kill -9 7532
```
-7

ps aux | grep -i firefox | grep -v grep | awk '{print $2}' | xargs -t -i kill -9 {}

blackdude · 2009-02-19 18:50:00 11
kill all instances of an annoying or endless, thread-spawning process
This is sample output - yours may be different.
-7

ps auxwww | grep outofcontrolprocess | awk '{print $9}' | xargs kill -9

fpater · 2009-02-20 21:49:38 6
Kill all processes matching a given name

This command kills all processes with 'SomeCommand' in the process name. There are other more elegant ways to extract the process names from ps but they are hard to remember and not portable across platforms. Use this command with caution as you could accidentally kill other matching processes! xargs is particularly handy in this case because it makes it easy to feed the process IDs to kill and it also ensures that you don't try to feed too many PIDs to kill at once and overflow the command-line buffer. Note that if you are attempting to kill many thousands of runaway processes at once you should use 'kill -9'. Otherwise the system will try to bring each process into memory before killing it and you could run out of memory. Typically when you want to kill many processes at once it is because you are already in a low memory situation so if you don't 'kill -9' you will make things worse
This is sample output - yours may be different.
-7

ps axww | grep SomeCommand | awk '{ print $1 }' | xargs kill

philiph · 2009-02-28 17:48:51 11
Pretty print output of

Show Sample Output
This is sample output - yours may be different.
```
1:
root
3410
00:00:00
gpm -m /dev/input/mice -t exps2

2:
root
3424
00:00:00
crond

3:
root
3488
00:00:00
/usr/sbin/atd
```
-8

ps -ef | awk -v OFS="\n" '{ for (i=8;i<=NF;i++) line = (line ? line FS : "") $i; print NR ":", $1, $2, $7, line, ""; line = "" }'

djangofan · 2012-12-04 15:59:53 9
send Everyone on your machine some love

This works just like write or wall ... cept one thing the sender is anonymous ... if you really want to drive everyone insane replace echo \"The Matrix has you...\" with cat /dev/urandom nice one to do on April fool's day Show Sample Output
This is sample output - yours may be different.
```
The Matrix has you... (on all writable ttys)
```
-12

w | egrep -v '(load|FROM)' | awk '{print $2}' | sed 's/^/tty/' | awk '{print "echo \"The Matrix has you...\" >> /dev/" $1}' | bash

copremesis · 2009-04-29 22:04:56 10
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-12

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:51 9
for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done
This is sample output - yours may be different.
-14

for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done

msh · 2011-03-15 16:18:29 5
‹ First < 55 56 57

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Automatic ssh Session Logger

A wrapper around ssh to automatically provide logging and session handling. This function runs ssh, which runs screen, which runs script. . The logs and the screen session are stored on the server. This means you can leave a session running and re-attach to it later, or from another machine. . . Requirements: * Log sessions on a remote server * Transparent - nothing extra to type * No installation - nothing to copy to the server beforehand . Features: * Function wrapper delegating to ssh - so nothing to remember - uses .ssh/config as expected - passes your command line option to ssh * Self-contained: no scripts to install on the server * Uses screen(1), so is: - detachable - re-attachable - shareable * Records session using script(1) * Configurable log file location, which may contain variables or whitespace L="$HOME" # local variable L="\$HOME" # server variable L="some space" . Limitations: * Log dir/file may not contain '~' (which would require eval on the server) . . The sessions are named by the local user connecting to the server. Therefore if you detach and re-run the same command you will reconnect to your original session. If you want to connect/share another's session simply run: $ USER=bob ssh root@server . The command above is stripped down to an absolute minimum. A fully expanded and annotated version is available as a Gist (git pastebin): https://gist.github.com/flatcap/3c42326abeb1197ee714 . If you want to add timing info to script, change the command to: $ ssh(){ L="\$HOME/logs/$(date +%F_%H:%M)-$USER";/usr/bin/ssh -t "$@" "mkdir -p \"${L%/*}\";screen -xRRS $USER script --timing=\"$L-timing\" -f \"$L\"";}

Making scripts runs on backgourd and logging output

Save all output to a log.

Loops over files, runs a command, dumps output to a file

In this case I'm selecting all php files in a dir, then echoing the filename and piping it to ~/temp/errors.txt. Then I'm running my alias for PHPCS (WordPress flags in my alias), then piping the PHPCS output to grep and looking for GET. Then I'm piping that output to the same file as above. This gets a list of files and under each file the GET security errors for that file. Extrapolate this to run any command on any list of files and pipe the output to a file. Remove the >> ~/temp/errors.txt to get output to the screen rather than to a file.

Upgrade all perl modules via CPAN

loop over a set of items that contain spaces

If you want to operate on a set of items in Bash, and at least one of them contains spaces, the `for` loop isn't going to work the way you might expect. For example, if the current dir has two files, named "file" and "file 2", this would loop 3 times (once each for "file", "file", and "2"): $ for ITEM in `ls`; do echo "$ITEM"; done Instead, use a while loop with `read`: $ ls | while read ITEM; do echo "$ITEM"; done

List Threads by Pid along with Thread Start Time

This command will list all threads started by a particular pid along with the start time of each thread. This is very valuable when diagnosing thread leaks.

show framebuffer console modes to use in grub vga option

look at /boot/grub/menu.lst for somethig like: ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=vga=795 # defoptions=vga=873 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(verbose mode) vga=775 debug # altoptions=(console mode) vga=ask # altoptions=(graphic mode) quiet splash # altoptions=(recovery mode) single vga=(decimal value) is framebuffer mode

Swap a file or dir with quick resotre

This lets you replace a file or directory and quickly revert if something goes wrong. For example, the current version of a website's files are in public_html. Put a new version of the site in public_html~ and execute the command. The names are swapped. If anything goes wrong, execute it again (up arrow or !!).

sort ip by count quickly with awk from apache logs

creates associative array from apache logs, assumes "combined" log format or similar. replace awk column to suit needs. bandwidth per ip is also useful. have fun. I haven't found a more efficient way to do this as yet. sorry, FIXED TYPO: log file should obviously go after awk, which then pipes into sort.

untar undo

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using awk

Commands using awk (1,418) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using awk (1,418)

sorted by