Hide

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again.

Delete that bloated snippets file you've been using and share your personal repository with the world. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.


If you have a new feature suggestion or find a bug, please get in touch via http://commandlinefu.uservoice.com/

Get involved!

You can sign-in using OpenID credentials, or register a traditional username and password.

First-time OpenID users will be automatically assigned a username which can be changed after signing in.

Hide

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

Hide

News

2011-03-12 - Confoo 2011 presentation
Slides are available from the commandlinefu presentation at Confoo 2011: http://presentations.codeinthehole.com/confoo2011/
2011-01-04 - Moderation now required for new commands
To try and put and end to the spamming, new commands require moderation before they will appear on the site.
2010-12-27 - Apologies for not banning the trolls sooner
Have been away from the interwebs over Christmas. Will be more vigilant henceforth.
2010-09-24 - OAuth and pagination problems fixed
Apologies for the delay in getting Twitter's OAuth supported. Annoying pagination gremlin also fixed.
Hide

Tags

Hide

Functions

Commands using cut from sorted by
Terminal - Commands using cut - 470 results
ipcalc $(ifconfig eth0 | grep "inet addr:" | cut -d':' -f2,4 | sed 's/.+Bcast:/\//g') | awk '/Network/ { print $2 } '
ifconfig eth0 | grep "inet:" | cut -d ":" -f2 | cut -d " " -f1
IP=`ifconfig eth0 | grep "inet addr:" | ips |cut -d ":" -f 2 | cut -d " " -f 1`;SUBNET=`ifconfig eth0 | grep "inet addr:" | ips |cut -d ":" -f 3 | cut -d " " -f 1`;RANGE=`ipcalc $IP/$SUBNET | grep "Network:" | cut -d ' ' -f 4`;echo $RANGE
ifconfig -a|grep Bcast:|cut -d\: -f2|awk '{print $1}'
lynx --dump --source http://www.xkcd.com | grep `lynx --dump http://www.xkcd.com | egrep '(png|jpg)'` | grep title | cut -d = -f2,3 | cut -d '"' -f2,4 | sed -e 's/"/|/g' | awk -F"|" ' { system("display " $1);system("echo "$2); } '
2009-12-03 18:53:57
Functions: awk cut egrep grep
-1

Same thing just a different way to get there. You will need lynx

du | sort -nr | cut -f2- | xargs du -hs
for item in *;do echo -n "$item - ";find "$item" -type f -print0 | xargs -0 file -iNf - | grep video | cut -d: -f1 | xargs -d'\n' /usr/share/doc/mplayer/examples/midentify | grep ID_LENGTH | awk -F= '{sum+=$2} END {print(sum/60)}'; done | grep -v ' - 0$'
2009-11-19 06:28:15
User: jnash
Functions: awk cut echo file grep xargs
0

I know this has been beaten to death but finding video files using mime types and printing the "hours of video" for each directory is (IMHO) easier to parse than just a single total. Output is in minutes.

Among the other niceties is that it omits printing of non-video files/folders

PS: Barely managed to fit it within the 255 character limit :D

find ./ -type f -print0 | xargs -0 file -iNf - | grep video | cut -d: -f1
2009-11-19 06:05:36
User: jnash
Functions: cut file find grep xargs
0

Uses mime-type of files rather than relying on file extensions to find files of a certain type.

This can obviously be extended to finding files of any other type as well.. like plain text files, audio, etc..

In reference to displaying the total hours of video (which was earlier posted in command line fu, but relied on the user having to supply all possible video file formats) we can now do better:

find ./ -type f -print0 | xargs -0 file -iNf - | grep video | cut -d: -f1 | xargs -d'\n' /usr/share/doc/mplayer/examples/midentify | grep ID_LENGTH | awk -F "=" '{sum += $2} END {print sum/60/60; print "hours"}'
modinfo $(cut -d' ' -f1 /proc/modules) | sed '/^dep/s/$/\n/; /^file\|^desc\|^dep/!d'
2009-11-18 23:40:46
User: sputnick
Functions: cut modinfo sed
6

I modify 4077 and marssi commandline to simplify it and skip an error when parsing the first line of lsmod (4077). Also, it's more concise and small now. I skip using xargs ( not required here ). This is only for GNU sed.

For thoses without GNU sed, use that :

modinfo $(lsmod | awk 'NR>1 {print $1}') | sed -e '/^dep/s/$/\n/g' -e '/^file/b' -e '/^desc/b' -e '/^dep/b' -e d
getent passwd|cut -d: -f1|xargs -n1 passwd -e
2009-11-18 19:46:15
User: romulusnr
Functions: cut getent passwd xargs
0

Alternately for those without getent or only want to work on local users it's even easier:

cut -d: -f1 /etc/passwd|xargs -n1 passwd -e

Note that not all implementations of passwd support -e. On RH it would be passwd -x0 (?) and on Solaris it would be passwd -f.

lsmod | cut -d' ' -f1 | xargs modinfo | egrep '^file|^desc|^dep' | sed -e'/^dep/s/$/\n/g'
2009-11-17 02:13:34
User: mohan43u
2

Run this as root, it will be helpful to quickly get information about the loaded kernel modules.

slice(){ cut -c$((${#1}+1))-; }; ls -l | slice "-rw-r--r--"
slice="-rw-r--r-- "; ls -l | cut -c $(echo "$slice" | wc -c)-
find -name '*.avi' | while read i ; do echo $(mplayer -identify -frames 0 -vo null -nosound "$i" 2>&1 | grep ID_LENGTH | cut -d= -f2)" ""$i" ;done | sort -k1 -r -n | sed 's/^\([^\ ]*\)\ \(.*\)$/\2:\1/g'
2009-11-09 17:14:59
User: ZungBang
Functions: cut echo find grep read sed sort
2

handles file names with spaces and colons, fixes sort (numeric!), uses mplayer, same output format as other alternatives

for i in *.avi; do echo -n "$i:";mediainfo $i|head | grep PlayTime | cut -d: -f2 ; done | sort -t: -k2 -r
2009-11-09 12:42:20
User: yooreck
Functions: cut echo grep head sort
0

Similar but using mediainfo instead of totem-something

for i in *.avi; do echo -n "$i:";totem-gstreamer-video-indexer $i | grep DURATION | cut -d "=" -f 2 ; done | sort -t: -k2 -r
2009-11-09 02:59:53
User: iadbungler
Functions: cut echo grep sort
1

Sort .avi movies by time length, print the longest first, and so on...

sudo ifconfig -a | grep eth | grep HW | cut -d' ' -f11
git diff --stat `git log --author="XXXXX" --since="12 hours ago" --pretty=oneline | tail -n1 | cut -c1-40` HEAD
2009-11-04 01:41:33
User: askedrelic
Functions: cut diff tail
3

Figures out what has changed in the last 12 hours.

Change the author to yourself, change the time since to whatever you want.

ifconfig eth1 | grep inet\ addr | awk '{print $2}' | cut -d: -f2 | sed s/^/eth1:\ /g
2009-11-03 19:26:40
User: TuxOtaku
Functions: awk cut grep ifconfig sed
2

Sometimes, you don't really care about all the other information that ifconfig spits at you (however useful it may otherwise be). You just want an IP. This strips out all the crap and gives you exactly what you want.

for x in `find /vmfs/volumes/ -name *vmx -exec grep -H linux.iso {} \; |cut -d : -f 1`; do echo $x; grep -i sync $x; done;
2009-10-30 16:19:16
User: uid0
Functions: cut echo grep sync
0

besure to adjust your find to use to correct location of your VMX files.

teste.txt < cut -d : -f 1,5 /etc/passwd | tr : \\t | tr a-z A-Z | cat teste.txt
for i in $(netstat --inet -n|grep ESTA|awk '{print $5}'|cut -d: -f1);do geoiplookup $i;done
2009-10-18 20:41:47
Functions: awk cut grep netstat
3

Sample command to obtain a list of geographic localization for established connections, extracted from netstat. Need geoiplookup command ( part of geoip package under CentOS)

ord () { seq 1 127 | while read i; do echo `chr $i` $i; done | grep "^$1 " | cut -c '3-' }
2009-10-16 21:54:01
User: infinull
Functions: cut echo grep read seq
0

uses the previous "chr" function and uses it to create the inverse function "ord" by brute force.

It's slow, It's inelegant, but it works.

I thought I needed ord/chr to do a cartesian cipher in shell script a whie ago, but eventualy I realized I could get fancy with tr and do the same thing...

echo $RANDOM$RANDOM$RANDOM |cut -c3-12
dpkg --get-selections | cut -f1 | while read pkg; do dpkg -L $pkg | xargs -I'{}' bash -c 'if [ ! -d "{}" ]; then echo "{}"; fi' | tr '\n' '\000' | du -c --files0-from - | tail -1 | sed "s/total/$pkg/"; done
2009-10-12 14:57:54
User: pykler
Functions: bash cut du echo read sed tail tr xargs
Tags: Debian wajig
4

Calculates the size on disk for each package installed on the filesystem (or removed but not purged). This is missing the

| sort -rn

which would put the biggest packges on top. That was purposely left out as the command is slightly on the slow side

Also you may need to run this as root as some files can only be checked by du if you can read them ;)