Commands using sleep sorted by votes

Commands using sleep (289)

sorted by

Monitor ElasticSearch cluster health - Useful for keeping an eye on ES when rebalancing takes place

while true; do clear; curl -XGET 'http://localhost:9200/_cluster/health?pretty=true'; sleep 1; done

cosmin · 2016-05-25 16:21:35 71

Alert visually until any key is pressed

I learned a few things reading this command. But I did run into a few issues: 1. On systems that don't use GNU echo (e.g. macOS 10.14.5 Mojave), the e option may not be supported. In this case ANSI escape codes will echoed as text and the terminal will not flash, like this: \e[?5h\e[38;5;1m A L E R T Thu Jun 20 16:31:29 PDT 2019 2. Since the read command strips\ignores leading backslashes, if a user types the backslash character once in the loop, it will not break. Typing backslash twice in a loop will break as expected. 3. The foreground color is set to red (\e[38;5;1m) on every loop. This could be set once before we call while, and then reset once when the loop breaks. 4. Instead of resetting the foreground color when it breaks, the video mode is set back to normal (\e[?5l). This has the effect of leaving the terminal text red until it is manually reset. The alternative I'm proposing here addresses these issues. I tested it on macOS and Arch Linux. Show Sample Output
This is sample output - yours may be different.
```
 A L E R T Thu Jun 20 16:31:29 PDT 2019
 A L E R T Thu Jun 20 16:31:30 PDT 2019
```
1

printf "\e[38;5;1m"; while true; do printf "\e[?5h A L E R T %s\n" "$(date)"; sleep 0.1; printf "\e[?5l"; read -r -s -n1 -t1 && printf "\e[39m" && break; done

z80a · 2019-06-21 00:05:16 37
Infinite loop ssh
This is sample output - yours may be different.
1

until ssh login@10.0.0.1; do echo "Nope, keep trying!"; fi; sleep 10; done

minnmass · 2021-09-29 14:53:55 1001
Create a progress bar over entire window until we count to 1000

https://wuseman.nr1.nu:8080/file/E8AcLVgMPZ2LSJQf/9BD8V8ADYNhR6cca/parallel_print_progress.gif Show Sample Output
This is sample output - yours may be different.
```
https://wuseman.nr1.nu:8080/file/E8AcLVgMPZ2LSJQf/9BD8V8ADYNhR6cca/parallel_print_progress.gif
```
1

seq 1000 |parallel -j30 --bar '(echo {};sleep 0.1)'

wuseman1 · 2021-12-13 11:24:50 215
Create a visually twisted effect by alternating the direction of the "staples" effect vertically. The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right.

The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right. For odd-numbered lines (with an index j), the ((j + i) % 2 == 0) condition is satisfied. In this case, the line width is set to i, resulting in the line moving from left to right. For even-numbered lines, the ((j + i) % 2 == 0) condition is not satisfied. The line width is set to $(tput cols) - i, causing the line to move from right to left. This alternating direction of movement creates a twisted visual effect as the lines appear to move in opposite directions. The code runs in a continuous loop, repeatedly updating the lines with changing background colors. There is a slight pause of 0.05 seconds between each iteration to control the speed of the animation.
This is sample output - yours may be different.
1

while :; do for ((i=0;i<$(tput cols);i++));do clear;for ((j=0;j<$(tput lines);j++));do printf "\e[48;5;$((RANDOM%256))m%*s\e[0m\n" $(((j+i)%2?$(tput cols)-i:i)) "";done;sleep 0.05;done;done

wuseman1 · 2023-07-04 00:47:37 244
teatimer

plays wave file after 3 minutes
This is sample output - yours may be different.
0

sleep 3m; play bigben.wav

legba7 · 2009-02-13 13:20:13 7
Display an updating clock in sh variants

Handy if all you have is a console session or tty. Show Sample Output
This is sample output - yours may be different.
```
$ while true; do date; sleep 1; done
Mon Mar 23 15:42:52 PDT 2009
Mon Mar 23 15:42:53 PDT 2009
Mon Mar 23 15:42:54 PDT 2009
Mon Mar 23 15:42:55 PDT 2009
Mon Mar 23 15:42:56 PDT 2009
```
0

while true; do date; sleep 1; done

cbetts · 2009-03-23 22:44:59 13
checks if host /service is up on a host that doesn't respond to ping

the command for the impatient sysadmin: simply checks every five secs, if a host or a specific service running on it is up. ideal for hosts that are configured not to respond on pings. Show Sample Output
This is sample output - yours may be different.
```
Starting Nmap 4.76 ( http://nmap.org ) at 2009-08-14 22:14 CEST
Interesting ports on 192.168.0.1:
PORT   STATE SERVICE
80/tcp open  http
```
0

while true; do clear; nmap ${hostname} -PN -p ${hostport}; sleep 5; done

flokra · 2009-08-14 20:19:59 3
Log a command's votes

Log a command's votes, then run: gnuplot -persist <(echo "plot 'votes' with lines")
This is sample output - yours may be different.
0

while true; do curl -s http://www.commandlinefu.com/commands/view/3643/log-a-commands-votes | grep 'id="num-votes-' | sed 's;.*id="num-votes-[0-9]*">$[0-9\-]*$</div>;\1;' >> votes; sleep 10; done

matthewbauer · 2009-09-26 00:55:24 44
Check if a .no domain is available

Mostly for Norwegians, but easily adoptable to others. Very handy if you are brainstorming for a new domainname. Will only display the available ones.. You can usually do this better with dig, but if you dont have dig, or the TLD only have an online service to check with, this will be usefull.. Show Sample Output
This is sample output - yours may be different.
```
xeor@nibler:~$ check_dns_no test1 test2 test3
test2.no available
test3.no available
```
0

check_dns_no() { for i in $* ; do if `wget -O - -q http://www.norid.no/domenenavnbaser/whois/?query=$i.no | grep "no match" &>/dev/null` ; then echo $i.no "available" ; fi ; sleep 1 ;done }

xeor · 2009-09-30 21:17:33 8
Record Alexa Traffic Stats of your Website

This will record the Alexa Traffic Stats to a file and run every 5 hours. -- www.fir3net.com --
This is sample output - yours may be different.
0

x=1 ; while [ $x -le 10 ] ; do lynx -dump http://www.alexa.com/siteinfo/http://[YOUR WEBSITE] | grep Global | sed 's/ \|Global\|\,//g' >> /var/log/alexa-stats.txt ; sleep 5h ; done &

felix001 · 2009-10-17 13:48:05 3
Play back shell session recorded using the

This command will play back each keystroke in a session log recorded using the script command. You'll need to replace the ^[ ^G and ^M characters with CTRL-[, CTRL-G and CTRL-M. To do this you need to press CTRL-V CTRL-[ or CTRL-V CTRL-G or CTRL-V CTRL-M. You can adjust the playback typing speed by modifying the sleep. If you're not bothered about seeing each keypress then you could just use: cat session.log Show Sample Output
This is sample output - yours may be different.
```
$ script session.log
Script started, file is session.log
$ pwd
/home/jon
$ exit
Script done, file is session.log


$ (IFS=; sed 's/^[]0;[^^G]*^G/^M/g' session.log | while read -n 1 ITEM; do [ "$ITEM" = "^M" ] && ITEM=$'\n'; echo -ne "$ITEM"; sleep 0.05; done; echo)
Script started on Wed 20 Jan 2010 15:56:36 GMT
$ exit
Script done on Wed 20 Jan 2010 15:56:45 GMT
```
0

(IFS=; sed 's/^[]0;[^^G]*^G/^M/g' <SessionLog> | while read -n 1 ITEM; do [ "$ITEM" = "^M" ] && ITEM=$'\n'; echo -ne "$ITEM"; sleep 0.05; done; echo)

jgc · 2010-01-20 16:11:32 5
Check whether laptop is running on battery or cable

With progress bar.. hahaa this is friggin' kludge Show Sample Output
This is sample output - yours may be different.
```
Current voltage: 11747 mV..
```
0

while true;do clear;echo -n Current\ `grep voltage /proc/acpi/battery/BAT0/state | awk '{print $2" "$3" "$4}'`;for i in `seq 1 5`;do sleep 1;echo -n .;done;done

lolcmd · 2010-06-11 06:30:17 3
Stop your screen saver interrupting your mplayer sessions

Requires the xautomation package. Show Sample Output
This is sample output - yours may be different.
```
   
```
0

maxplayer (){ while :; do xte 'mousermove -4 20'; sleep 1s; xte 'mousermove 4 -20'; sleep 2m; done& mplayer -fs "$1"; fg; }

base9 · 2010-07-28 06:51:30 3
Instant editing screenshot with Gimp

Thank You, hackerb9!
This is sample output - yours may be different.
0

sleep 4; xwd > /tmp/_.xwd ; gimp /tmp/_.xwd

yababay · 2010-09-19 17:04:32 3
Instant editing screenshot with Gimp
This is sample output - yours may be different.
0

sleep 4; F="$(tempfile -s '.xwd')"; xwd > "$F" ; gimp "$F"

krissi · 2010-09-23 12:48:48 3
flush (not delete) frozen emails from exim's mail queue

can also be invoked as 'exipick -zi | exim -dM' if you do not need/want the delay between flushes.
This is sample output - yours may be different.
0

exipick -zi | while read x ; do exim -dM "$x"; sleep 1;done

alustenberg · 2011-01-04 20:17:30 3
Mixing music in bash

Of course, a fifo is required for piloting the fade out of another song, but with a few bash function, we can mix music in bash like : crossfadeIn > mplayerfifo1 & crossfadeOut > mplayerfifo2 loop 0 10 > mplayer fifo1 etc etc
This is sample output - yours may be different.
0

( for((i=0;$i<100;i++))do echo volume $i 1; sleep 0.1s; done; )| mplayer -slave -quiet sample.mp3

Juluan · 2011-01-06 11:22:03 6
let the cow suggest some commit messages for you

I used curl instead of lynx. Show Sample Output
This is sample output - yours may be different.
```
 _______________________
< omg what have I done? >
 -----------------------
        \   ^__^
         \  (oo)\_______
            (__)\       )\/\
                ||----w |
                ||     ||
```
0

while true; do curl -s http://whatthecommit.com | perl -p0e '($_)=m{<p>(.+?)</p>}s' | cowsay; sleep 2; done

seungwon · 2011-01-30 02:17:41 3
Wait the end of prog1 and launch prog2
This is sample output - yours may be different.
0

while pkill -0 prog1; do sleep 10; done; prog2

daa · 2011-02-12 02:53:53 5
Console clock

Does the same but without a pipe and a new shell.
This is sample output - yours may be different.
0

while sleep 1; do echo -n "\r`date`"; done

nkoehring · 2011-02-15 23:48:37 3
Countdown Clock
This is sample output - yours may be different.
0

MIN=10 && for i in $(seq $(($MIN*60)) -1 1); do printf "\r%02d:%02d:%02d" $((i/3600)) $(( (i/60)%60)) $((i%60)); sleep 1; done

bugmenot · 2011-02-20 10:24:22 3
Watch RX/TX rate of an interface in kb/s
This is sample output - yours may be different.
0

while :; do OLD=$NEW; NEW=`cat /proc/net/dev | grep eth0 | tr -s ' ' | cut -d' ' -f "3 11"`; echo $NEW $OLD | awk '{printf("\rin: % 9.2g\t\tout: % 9.2g", ($1-$3)/1024, ($2-$4)/1024)}'; sleep 1; done

DerksIT · 2011-03-22 10:23:33 3
View a sopcast stream

requires sp-auth installed This command will auto kill sp-sc after vlc is closed, so u wont have to do it manually
This is sample output - yours may be different.
0

(sp-sc sop://broker.sopcast.com:3912/80562 8908 10999 &>/dev/null &); sleep 10; wait $(vlc http://localhost:10999); killall sp-sc

Bonster · 2011-04-06 00:08:38 3
Timer with sound alarm

Just replace 15m with desired time. no suffix or 's' for seconds; 'h' for hours You need to be root or in audio group to write to /dev/dsp. You may use yes | head -n 2000 for about 1 second beep. Wrote this as echo -e '\a' not always works as desired (ex. visual bell)
This is sample output - yours may be different.
0

sleep 15m; yes > /dev/dsp

winemore · 2011-04-17 15:19:14 8
‹ First < 5 6 7 8 9 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

m4a to mp3 conversion with ffmpeg and lame

A batch file version of the same command would be: for f in *.m4a; do ffmpeg -i "$f" -acodec libmp3lame -ab 256k "${f%.m4a}.mp3"; done

Rename files in batch

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Mount a .iso file in UNIX/Linux

"-o loop" lets you use a file as a block device

Create a mirror of a local folder, on a remote server

Create a exact mirror of the local folder "/root/files", on remote server 'remote_server' using SSH command (listening on port 22) (all files & folders on destination server/folder will be deleted)

Transforms a file to all uppercase.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

How to get an absolute value

Whenever we are only interested in difference between two numbers and not the positive/negative values we can use this in script.

camelcase to underscore

For mac users !

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sleep

Commands using sleep (289) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sleep (289)

sorted by