Commands using sleep sorted by votes

Commands using sleep (289)

sorted by

Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando STAT
This is sample output - yours may be different.
-2

while true; do A=$(stat -c%s FILE); sleep 1; B=$(stat -c%s FILE); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:39:06 15
hardcode dnsserver, no more rewriting of etc/resolv.conf

runs in background rewriting /etc/resolv.conf periodically dns
This is sample output - yours may be different.
-2

while sudo sed -i -e 's/^$nameserver$.*$/\1 $dns/' /etc/resolv.conf; do sleep 15; done &

dav23r · 2018-05-14 16:03:08 153
if you are alone and have to determine which switch port your server ends ... here we go

use this comand to see which switch port your network interface is using. but remind, there is no network traffic for 10 minutes or how long you run the comand. if you start the comand via ssh, port will come up again after the "for loop" has endet
This is sample output - yours may be different.
-3

for i in $(seq 300) ; do ethtool -s eth0 autoneg on ; sleep 2 ; done

christian773 · 2010-10-31 18:15:54 4
Power Supply Triggered Alert

Checks whether your power supply is still plugged in. If not it will trigger an alarm at maximum volume. Show Sample Output
This is sample output - yours may be different.
```
run this in a screen and unplug your headphones.
```
-3

check(){ power=$(acpi -a) ; if [[ $power == *on-line* ]] ; then echo "supply is on"; else echo "somebody is steeling your laptop"; amixer -c0 set Master 100+ unmute ; mpg123 nuclear-alarm.mp3 ; fi } ;while true; do check ; sleep 2 ; done

hoodie · 2011-12-10 13:42:52 4
Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando LS + AWK Show Sample Output
This is sample output - yours may be different.
```
18720 Bps
```
-3

while true; do A=$(ls -l FILE | awk '{print $5}'); sleep 1; B=$(ls -l FILE | awk '{print $5}'); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:33:02 13
See smbstatus all the time

See smbstatus Output within a 5 second interval (for monitoring smb access)
This is sample output - yours may be different.
-4

while (( $i != 0 )) { smbstatus; sleep 5; clear }

unixmonkey4084 · 2009-06-03 13:26:30 9
shutdown pc in a 4 hours
This is sample output - yours may be different.
-4

sleep 4h && halt

javisol · 2011-05-02 13:46:30 3
Polls fos network port usage
This is sample output - yours may be different.
-4

while sleep 1; do date; (netstat -a -n | grep 80) ; done

hute37 · 2011-05-16 07:56:56 5
Listen to the OS X system's voices

Listen to different voices in the system--useful for picking the voice you like
This is sample output - yours may be different.
-5

for person in Alex Bruce Fred Kathy Vicki Victoria ; do say -v $person "Hello, my name is $person"; sleep 1; done

haivu · 2009-03-09 15:42:13 6
Periodically loop a command

You can use this to loop any command to periodically see the output. while true; do [YOUR COMMAND HERE]; sleep [# of seconds]; done; Alternatively, you can put it in a simple shell script to save typing! #/!bin/bash while true; do $1; sleep $2; done; /path/to/script.sh "ifconfig eth0 | grep 'inet addr:'" 60 Show Sample Output
This is sample output - yours may be different.
```
inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[... Ctrl+C to stop]
```
-5

while true; do ifconfig eth0 | grep "inet addr:"; sleep 60; done;

bandit36 · 2009-04-01 19:29:28 19
show space used by postgres

this command shows the space used in postgres directory. Show Sample Output
This is sample output - yours may be different.
```
4	./pg_twophase
5364	./base/17868
5268	./base/11563
5268	./base/1
114288	./base/11564
4	./base/pgsql_tmp
5736	./base/19846
135932	./base
268584	.
268584	total
```
-5

while (( 1==1 )); do du -c . >> output.log; sleep 2; done; tail -f output.log

aceiro · 2010-07-12 17:23:45 4
Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item

Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item enable auto loot and create macro, put mouse over slot on the bar /cast Prospecting /use Elementium Ore
This is sample output - yours may be different.
-5

while true; do sleep 4 ; xdotool click 1 ; done

rusino · 2011-09-23 09:23:02 4
Wait a moment and then Power off

If you are on your bed, waching a movie or if you are downloading something, but you whant to sleep. You can use these easy command to power off after X time. The time is in sec. if you whant to wait 1 H, use: sleep 3600; poweroff
This is sample output - yours may be different.
-11

sleep 10; poweroff

xmuda · 2013-04-13 22:07:15 6
Five Minutes To Go

command to turn off your computer when you go home and can not wait Show Sample Output
This is sample output - yours may be different.
```
5
4
3
2
1
0
bye, bye
```
-14

for i in $(seq 0 5) ; do echo "5 - $i" | bc -l ; sleep 60 ; done && echo "bye, bye" && shutdown -h now

arctarus · 2009-03-13 12:16:35 835
‹ First < 10 11 12

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

See system users

Create a file and manipulate the date

File rotation without rename command

Rotates log files with "gz"-extension in a directory for 7 days and enumerates the number in file name. i.e.: logfile.1.gz > logfile.2.gz I needed this line due to the limitations on AIX Unix systems which do not ship with the rename command.

Show all mergeinfo for a svn subtree

Erase DVD RW

View all new log messages in real time with color

This will show all changes in all log files under /var/log/ that are regular files and don't end with `gz` nor with a number

Create a 5 MB blank file via a seek hole

Similar to the original, but is much faster since it only needs to write the last byte as zero. A diff on testfile and testfile.seek will return that they are the same.

Kill any process with one command using program name

This will kill all. e.g. killall firefox

Find the package that installed a command

Use "most" as your man pager

you should have the "most" package installed. I like it because it is colorful and easier to read. alternatively you can use "less" instead of "most". you can also add this to your ~/.bashrc to make it permanent.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sleep

Commands using sleep (289) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sleep (289)

sorted by