Commands using sudo sorted by votes

Commands using sudo (537)

sorted by

Check if TCP port 25 is open
This is sample output - yours may be different.
0

sudo lsof -iTCP:25 -sTCP:LISTEN

pdxdoughnut · 2013-11-12 17:32:34 6
Remove all unused kernels with apt-get
This is sample output - yours may be different.
0

% sudo yum remove streams-$(uname-r)

totalnut151 · 2013-11-21 17:41:19 6
dpkg - undo selection of installed packages for deinstall

If you run dpkg --clear-selections or have otherwise selected installed packages for deinstall, but want to undo it, run this. It will set all installed packages back to installed status so that they won't be removed by commands like "dpkg -Pa"
This is sample output - yours may be different.
0

dpkg -l | grep ^ri | awk '{print $2 " install"}' | sudo dpkg --set-selections

ajmccluskey · 2013-11-23 06:41:18 14
Kill all processes found in grep

Kills all processes with a certain string. This was done to kill all ssh sessions openned by zenoss which look like: usr/bin/ssh /opt/zenoss/bin/zenmodeler
This is sample output - yours may be different.
0

for line in `ps aux | grep <string> | awk '{print $2}'`; do sudo kill $line; done;

mjbrune · 2013-11-24 00:02:16 17
Change user's password
This is sample output - yours may be different.
0

sudo passwd <username>

dsetton · 2014-02-01 19:46:40 6
Berechtigungen nach einer Referenz ?ndern
This is sample output - yours may be different.
0

sudo chmod --reference=Referenz.foo Datei.foo

mischka · 2014-02-11 09:29:48 6
Create a nifty overview of the hardware in your computer

entering this command as root may give more complete results, creating a tmp file, and immediately opening the file might be more useful
This is sample output - yours may be different.
0

sudo lshw -html > /tmp/hardware.html && xdg-open /tmp/hardware.html

Sadi · 2014-03-08 10:40:21 7
Route some ips (or domain names) over VPN

In this example, 192.168.12.50 is the host that should be routed via the VPN and "ppp0" is the name of the VPN network interface (ifconfig shows you the list of network interfaces). Can be a IP or domain name. Show Sample Output
This is sample output - yours may be different.
```
add host 192.168.12.50: gateway ppp0
```
0

sudo /sbin/route add -host 192.168.12.50 -interface ppp0

jifilis · 2014-04-13 00:17:53 7
Create new user with sudo rights with home dir, bash shell
This is sample output - yours may be different.
0

export NEWUSER=newuser; mkdir /home/$NEWUSER; useradd -d /home/$NEWUSER -s /bin/bash -G sudo $NEWUSER; passwd $NEWUSER

vinaut79 · 2014-05-16 10:35:57 8
Synchronize date and time with a server
This is sample output - yours may be different.
0

sudo ntpdate serverip

Mahesh · 2014-05-26 04:49:29 7
Reboot to Windows (UEFI)

Quickly reboot directly to Windows (or any other operating system) without the need to enter BIOS/UEFI or boot loader (if any). It's valid for one boot only, no persistent changes to boot priorities.
This is sample output - yours may be different.
0

sudo efibootmgr --bootnext `efibootmgr | sed -n "s/^Boot$[0-9]\{4\}$\* Windows Boot Manager$/\1/p"` && reboot

moneytoo · 2014-05-31 11:51:52 7
Kill the X Server

There are times when a X Window server hangs. When this happens, you can log in on a terminal and kill the Xorg process (i.e. the X Server). This one line command will do the trick.
This is sample output - yours may be different.
0

sudo kill -9 $( ps -e | grep Xorg | awk '{ print $1 }' )

jeffskinnerbox · 2014-06-01 22:43:32 7
MAMP: "Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)" solution
This is sample output - yours may be different.
0

sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock /tmp/mysql.sock

99RedBalloons · 2014-07-02 07:24:19 7
Change directories using sudo

Change current working directory with root permissions. Place this snippet in your .bashrc to add a new "sudocd" command: function sudocd { sudo bash -c "cd $1;bash" } Usage: sudocd DIRECTORY Please note that if you will use this command to cd into directories with the permissions allowing only root to be in them, you will have to use sudo as a prefix to every command that changes/does something in that directory (yes, even ls).
This is sample output - yours may be different.
0

sudo bash -c "cd /PATH/TO/THE/DIRECTORY;bash"

Zath · 2014-07-28 20:20:04 35
dpkg: purge all packages matching some name

Recently in Debian Wheezy the dpkg command refuses to work with wildcards, so this is the one-liner alternative.
This is sample output - yours may be different.
0

sudo dpkg -P $(sudo dpkg -l yourPkgName* | awk '$2 ~ /yourPkgName.*/' | awk '$1 ~ /.i/' | awk '{print $2}')

woohoo · 2014-08-02 18:14:02 9
restart session
This is sample output - yours may be different.
0

sudo restart lightdm

sentenza · 2014-08-06 21:23:24 7
dpkg: purge all packages matching some name

Recently in Debian Wheezy the dpkg command refuses to work with wildcards, so this is the one-liner alternative. (alternative to #13614)
This is sample output - yours may be different.
0

sudo dpkg -P $(dpkg -l yourPkgName* | awk '$2 ~ /yourPkgName.*/ && $1 ~ /.i/ {print $2}')

wejn · 2014-08-06 22:40:32 9
Twitter the geek way

Rainbow Stream is a smart and nice Twitter client on terminal. Almost everything you can do with a GUI application can be done, even viewing an image. - Tab-autocomplete, history browsing - Beautiful built-in themes and custom configuration support - Tweet's images directly on your terminal. Show Sample Output
This is sample output - yours may be different.
```
     _ _            _ _____  _____
    | | |          | |  _  ||  _  |
  __| | |___   ____| |\ V /  \ V /
 / _` | __\ \ / / _` |/ _ \  / _ \
| (_| | |_ \ V / (_| | |_| || |_| |
 \__,_|\__| \_/ \__,_\_____/\_____/



Need tips ? Type "h" and hit Enter key!
[@dtvd88]:
```
0

sudo pip install rainbowstream && rainbowstream -iot

DTVD · 2014-08-20 06:45:16 8
Null a file with sudo
This is sample output - yours may be different.
0

sudo tee /path/to/file < /dev/null

Panovski · 2014-10-02 20:08:42 8
Set APM_level for HDD to prevent frequent parking
This is sample output - yours may be different.
0

sudo hdparm -B 200 /dev/sda

13_rom · 2014-10-16 13:01:13 8
mac address change
This is sample output - yours may be different.
0

sudo ifconfig mlan0 down; sudo ifconfig mlan0 hw ether 00:10:10:10:08:88; sudo ifconfig mlan0 up;

lainfinity · 2014-11-03 10:01:41 8
check the status of 'dd' in progress (OS X)

display dd status on OSX (coreutils) every 10 seconds Show Sample Output
This is sample output - yours may be different.
```
664+0 records in
664+0 records out
696254464 bytes (696 MB) copied, 426.767 s, 1.6 MB/s
```
0

watch -n 10 sudo kill -INFO $(pgrep -l '^dd$' | cut -d ' ' -f 1)

nfarrar · 2014-11-23 21:21:08 7
Look for the process bound to a certain port
This is sample output - yours may be different.
0

sudo netstat -tulpn | grep :8080

zluyuer · 2014-12-04 06:11:09 9
Look for the process bound to a certain port

grep : This shows the process running on that specific port.
This is sample output - yours may be different.
0

sudo lsof -i | grep :8080

cptjack · 2014-12-15 10:08:31 8

Show apps that use internet connection at the moment.

Show top apps that use internet, sorted by count connections and grouped by TYPE and Protocol Show Sample Output

sudo lsof -P -i -n | awk '{print $1,$5,$8}' | tail -n +2 | uniq -c | sort -nr

anton_slim · 2014-12-18 05:22:33 9

‹ First < 13 14 15 16 17 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

create random numbers within range for conjob usage

if you need to install cron jobs in a given time range.

check open ports without netstat or lsof

Download all images from a 4chan thread

first grep all href images then sed the url part then wget

reset Mageia urpmi media sources to network only

On Mageia (and Mandriva) Linux, this command will clear your existing urpmi configuration and configure it to use only network sources. It can be useful after you have installed from CD/DVD and don't want to continually be prompted to insert CD/DVD each time you install a package. acknowledgement: blino

Colour part of your prompt red to indicate an error

If the return code from the last command was greater than zero, colour part of your prompt red. The commands give a prompt like this: [user current_directory]$ After an error, the "[user" part is automatically coloured red. Tested using bash on xterm and terminal. Place in your .bashrc or .bash_profile.

Tail a log and replace according to a sed pattern

Tails a log and replaces it line-by-line according to whatever you want to replace. Useful if the file writing to the log can't be modified, so you need to modify its output instead.

Remount an already-mounted filesystem without unmounting it

Necessary for fsck for example. The remount functionality follows the standard way how the mount command works with options from fstab. It means the mount command doesn't read fstab (or mtab) only when a device and dir are fully specified. After this call all old mount options are replaced and arbitrary stuff from fstab is ignored, except the loop= option which is internally generated and maintained by the mount command. It does not change device or mount point.

Replace duplicate files by hardlinks

List your largest installed packages.

Requires the "wajig" package to be installed.

MoscowML with editable input-line and history

Works also with SML/NJ and other interpreters or tools with interactive environments.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sudo

Commands using sudo (537) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sudo (537)

sorted by