Commands using cd sorted by votes

Commands using cd (215)

sorted by

Install NMAP 5.0 ,Short and sweet command to do it

Just copy and paste the code in your terminal. Note : sudo apt-get for debian versions , change as per your requirement . Source : www.h3manth.com
This is sample output - yours may be different.
-6

sudo wget -c "http://nmap.org/dist/nmap-5.00.tar.bz2" && bzip2 -cd nmap-5.00.tar.bz2 | tar xvf - && cd nmap-5.00 && ./configure && make && sudo make install

hemanth · 2009-07-26 11:36:53 7
cd(), do a ls (or whatever you can imagine) after a cd, func to long please refer to description

some people on the net already use a cd(), but most of them break 'cd -' functionality, that is "go back where you have been previosly", or 'cd' which is "go back home". This cd() copes with that. Also when given a file name, go to the directory where this file is in. cd() { if [[ -n ${*} ]] then if [[ s${*}e == s-e ]] then builtin cd - elif [[ ! -d ${*} ]] then builtin cd "${*%/*}" else builtin cd "${*}" fi else builtin cd ~ fi ls -la }
This is sample output - yours may be different.
-6

cd(), do a ls (or whatever you can imagine) after a cd, func to long please refer to description

Xk2c · 2015-01-01 20:50:19 9
Go to the created directory after using mkdir
This is sample output - yours may be different.
-7

mkdir() { /bin/mkdir $@ && eval cd "\$$#"; }

fnando · 2009-03-30 17:24:21 12
Create a directory and cd into it

Create a directory called "dirname" and navigate into it.
This is sample output - yours may be different.
-7

Dir=dirname; mkdir $Dir && cd $Dir

saibbot · 2011-04-06 14:53:57 6
Flip from one directory to another

if you cd into a directory then cd into another directory somewhere else then you run the cd - command you will go to the previous directory you was in!! To go back to the other directory just run it again. So if you are working in 2 different directories then this is the perfect command for you.
This is sample output - yours may be different.
-7

cd -

techie · 2013-05-07 14:50:18 6
apache , how to avoid bugs and start directly the server

This command is designed in order to avoid this error : /etc/init.d/apache2 force-reload * Reloading web server config apache2 httpd not running, trying to start (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs [fail] Show Sample Output
This is sample output - yours may be different.
```
* Starting web server apache2                                           [ OK ] 
```
-9

cd /etc/init.d && sudo ./apache2 start

nco · 2010-04-17 16:01:18 3
cd
This is sample output - yours may be different.
-9

cd -

another · 2010-11-03 12:17:57 4
cd into the latest directory
This is sample output - yours may be different.
-9

cd -

unixmonkey14106 · 2011-06-24 23:10:10 3
Just take me to home directory

Just type 2 characters and enter, you will be back. Show Sample Output
This is sample output - yours may be different.
```
[YAK@myserv]$ pwd
/path/to/directory
[YAK@myserv]$ cd
[YAK@myserv]$ pwd
/home/YAK
```
-10

cd

YAK · 2009-02-06 02:37:17 19
annoy your sysadmin colleague

Somehow, i prefer forcing to rm interactively to accidently rm'ing everything...
This is sample output - yours may be different.
-10

cd / && touch ./\-i

joedhon · 2012-04-05 20:55:37 3
Duplicate a directory tree using tar and pipes

the f is for file and - stdout, This way little shorter. I Like copy-directory function It does the job but looks like SH**, and this doesn't understand folders with whitespaces and can only handle full path, but otherwise fine, function copy-directory () { ; FrDir="$(echo $1 | sed 's:/: :g' | awk '/ / {print $NF}')" ; SiZe="$(du -sb $1 | awk '{print $1}')" ; (cd $1 ; cd .. ; tar c $FrDir/ )|pv -s $SiZe|(cd $2 ; tar x ) ; } Show Sample Output
This is sample output - yours may be different.
```
copy-directory /media/cdrom /mnt/backup/
 104MB 0:00:06 [7.43MB/s] [============>                                                      ]  9% ETA 0:00:58
```
-11

(cd /source/dir ; tar cv .)|(cd /dest/dir ; tar xv)

marssi · 2009-07-19 10:31:13 12
Hide files and folders on GNOME Desktop.
This is sample output - yours may be different.
-12

cd ~/Desktop && for FILES in $(ls); do mv $FILES .${FILES}; done

kjell81d · 2010-10-05 15:16:30 6
go to home directory
This is sample output - yours may be different.
-25

cd

veganstraightedg · 2009-03-23 03:12:40 10
cd
This is sample output - yours may be different.
-25

cd

wdan02 · 2010-08-06 05:33:19 32
Get back to the root directory of a Windows drive (like c:\)

Useful to quickly get back to the Windows root directory of the current drive from a sub-directory within that drive. Works also without space between 'cd' and backslash: 'cd\' or 'cd \' have the same effect Show Sample Output
This is sample output - yours may be different.
```
C:\Users\...\ALongPath>cd \
C:\>
```
-35

cd \

VonC · 2009-02-14 21:53:51 128
‹ First < 7 8 9

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Random numbers with Ruby

There's been a few times I've needed to create random numbers. Although I've done so in PERL, I've found Ruby is actually faster. This script generates 20 random "10" digit number NOT A RANDOM NUMBER. Replace 20 (1..20) with the amount of random numbers you need generated

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Put a console clock in top right corner

Gives not only date but also some interesting status about the System

Advanced python tracing

Trace python statement execution and syscalls invoked during that simultaneously

Poor man's ntpdate

If you don't have netcat, you can use curl.

Print trending topics on Twitter

Kill all processes that don't belong to root/force logoff

explanation: grep -- displays process ids -v -- negates the matching, displays all but what is specified in the other options -u -- specifies the user to display, or in this case negate The process loops through all PIDs that are found by pgrep, then orders a forced kill to the processes in numerical order, effectively killing the parent processes first including the shells in use which will force the users to logout. Tested on Slackware Linux 12.2 and Slackware-current

Kill multiple instances of a running process

Find the package that installed a command

check open ports without netstat or lsof

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using cd

Commands using cd (215) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using cd (215)

sorted by