Commands using watch (155)

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Compression formats Benchmark
See: http://imgur.com/JgjK2.png for example. Do some serious benchmarking from the commandline. This will write to a file with the time it took to compress n bytes to the file (increasing by 1). Run: $ gnuplot -persist

Create a visually twisted effect by alternating the direction of the "staples" effect vertically. The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right.
The effect is achieved by moving odd-numbered lines from right to left and even-numbered lines from left to right. For odd-numbered lines (with an index j), the ((j + i) % 2 == 0) condition is satisfied. In this case, the line width is set to i, resulting in the line moving from left to right. For even-numbered lines, the ((j + i) % 2 == 0) condition is not satisfied. The line width is set to $(tput cols) - i, causing the line to move from right to left. This alternating direction of movement creates a twisted visual effect as the lines appear to move in opposite directions. The code runs in a continuous loop, repeatedly updating the lines with changing background colors. There is a slight pause of 0.05 seconds between each iteration to control the speed of the animation.

Duplicate several drives concurrently
If you have some drive imaging to do, you can boot into any liveCD and use a commodity machine. The drives will be written in parallel. To improve efficiency, specify a larger block size in dd: $dd if=/dev/sda bs=64k | tee >(dd of=/dev/sdb bs=64k) | dd of=/dev/sdc bs=64k To image more drives , insert them as additional arguments to tee: $dd if=/dev/sda | tee >(dd of=/dev/sdb) >(dd of=/dev/sdc) >(dd of=/dev/sdd) | dd of=/dev/sde

Find usb device in realtime
Using this command you can track a moment when usb device was attached.

Intercept, monitor and manipulate a TCP connection.
Forwards localhost:1234 to machine:port, running all data through your chain of piped commands. The above command logs inbound and outbound traffic to two files. Tip: replace tee with sed to manipulate the data in real time (use "sed -e 's/400 Bad Request/200 OK/'" to tweak a web server's responses ;-) Limitless possibilities.

Edit the /etc/sudoers config file the right way.
'visudo' is installed by default on most Unix-like systems. If not installed, you can get it from the 'sudo' package. 'visudo' will use the text editor found in your $EDITOR variable, whether it's vi, vim, emacs, nano or gedit. After making changes to the /etc/sudoers file, visudo will check for syntax errors, and notify you of them. This is better than 'vi /etc/sudoers', because of this capability. Rule #1 of system administration- if there is a tool that exists for editing config files, use the tool.

comment current line(put # at the beginning)

Analyze, check, auto-repair and optimize Mysql Database
A useful way to do a full check and auto repair damaged databases

find files larger than 1 GB, everywhere

output length of longest line

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: