All commands sorted by votes

All commands (14,187)

sorted by

Localize a Public IP on a specific interface

My first command :) I made this command to log public addresses of a virtual interface who connects random VPN servers around the world. Show Sample Output
This is sample output - yours may be different.
```
date/hour/ipaddress/ip location
```
0

(date "+%d-%m-%Y %H:%M:%S";curl -s --interface lo:1 ifconfig.me| xargs -t geoiplookup 2>&1)|sed -e 's/geoiplookup/IP:/g' -e 's/GeoIP Country Edition/Country/g'|tr -s "\n" " "|sed 'a\ '

guerito · 2013-10-07 15:28:55 6
redirect STDOUT and STDERR to STDOUT and also to a file
This is sample output - yours may be different.
0

command_line 2>&1 | tee -a output_file

esplinter · 2014-04-05 13:02:30 6
My git log alias
This is sample output - yours may be different.
0

git log --graph --decorate --pretty=oneline --abbrev-commit

nicolasmccurdy · 2014-07-16 02:07:23 6
relax with philosophy while taking a dig
This is sample output - yours may be different.
0

for i in `seq 1 100`; do echo "I think therefore I am" | espeak; done

marlboro · 2014-11-08 06:30:11 10
Remove excess noise from a set of mp4 videos.

Full command: for f in input/*; do BN=$(basename "$f"); ffmpeg -i "$f" -vn "temp/$BN.flac"; sox "temp/$BN.flac" "temp/$BN-cleaned.flac" noisered profile 0.3; ffmpeg -i "$f" -vcodec copy -an "temp/$BN-na.mp4"; ffmpeg -i "temp/$BN-na.mp4" -i "temp/$BN-cleaned.flac" "output/$BN"; done This was over the 255 character limit and I didn't feel like deliberately obfuscating it. 1. Create 'input', 'output' and 'temp' directories. 2. Place the files that you want to remove the hiss/static/general noise from in the input directory. 3. Generate a noise reduction profile with sox using 'sox an_input_file.mp4 -n trim x y noiseprof profile', where x and y indicates a range in seconds that only the sound you want to eliminate is present in. 4. Run the command.
This is sample output - yours may be different.
0

for f in input/*; do BN=$(basename "$f"); ffmpeg -i "$f" -vn "temp/$BN.flac"...

samcamwilliams · 2015-03-01 02:48:19 8
count files and directories disk space usage

can be pointed at specific files using: du -ahc /path/to/file counting only directories is faster: du -hc .
This is sample output - yours may be different.
0

du -ahc

lolssl · 2015-10-01 19:38:39 10
replace color in image sequence
This is sample output - yours may be different.
0

mogrify -path ../png_white/ -fuzz 3.5% -fill white -opaque "#50566b" *.png

ceddi · 2016-10-17 20:01:00 16

Run a job in the background and prefix it's output with some string. This is particularly useful if you are running inside a docker container in a startup script (sue me, I'll run two jobs in a docker container if I want to) and you can run something like: /usr/sbin/nginx 2>&1 | awk '{print "[NGINX] " $0}' & /opt/jws-3.1/tomcat8/bin/catalina.sh run 2>&1 | awk '{print "[TOMCAT] " $0}' & while true; do ; done it can also be combined with tee to create a file log as well as a stdout log, for example if the script above where a script called "/bin/start-container.sh" then you could run /bin/start-container.sh | tee /var/log/containerlogs Show Sample Output

nginx 2>&1 | awk '{print "[NGINX] " $0}' &

hvindin · 2017-04-25 22:18:38 20

kill the first docker container in docker ps

Useful when developing and you donut usually have other docker commands running Show Sample Output
This is sample output - yours may be different.
```
 2018-05-24 15:06:10 ? |ruby-2.4.1| Jim-Park-MacBook-Pro in ~/workspace/example
±  |master ?| ? docker kill $(docker ps -q)
abc123456789
```
0

docker kill $(docker ps -q)

jim80net · 2018-05-24 22:11:06 200
find&grep all in once

calls grep on all non-binary files returned by find on its current working directory Show Sample Output
This is sample output - yours may be different.
```
./Main.java://	public static void main(String[] args) throws IOException
```
-1

#!/bin/bash find | grep -P -v "(class)|(zip)|(png)|(gz)|(gif)|(jpeg)|(jpg)" | xargs -I @ grep -H $1 @

kirdie · 2011-10-14 13:28:49 4
Terminate script or shell if not launched as root

This example code is intended to be used as a root permissions check in a script. It makes use of the $EUID (effective user ID) environment variable which is fully su- and sudo-safe.
This is sample output - yours may be different.
-1

if [[ $EUID -ne 0 ]]; then echo 'Root permissions required! Exiting.'; exit; fi

lordtoran · 2011-11-19 23:06:52 8
Spotlight Server Disabled
This is sample output - yours may be different.
-1

cd /System/Library/LaunchDaemons; sudo launchctl load -w com.apple.metadata.mds.plist

evandrix · 2012-05-16 15:42:10 4
umount --rbind mount with submounts

set CDIR for it to work right..
This is sample output - yours may be different.
-1

for i in `cat /proc/mounts | awk '{print $2}' | grep ${CDIR} |sort -r` ; do umount $i; done

mordjah · 2013-05-07 23:46:27 5
Tar - Compress by excluding folders

Tar - Compress by excluding folders Show Sample Output
This is sample output - yours may be different.
```
Tar - Compress by excluding folders
```
-1

tar -cvf /path/dir.tar /path/dir* --exclude "/path/dir/name" --exclude "/path/dir/opt"

sandeepverma · 2009-12-15 09:48:41 3
Get iPhone OS firmware URL (.ipsw)

Usage: get-ipsw device-name generation-string firmware-version For example: get-ipsw iPod 2,1 4.0 Different generation strings: iPhone 3G: iPhone 1,2 iPhone 3GS: iPhone 2,1 iPod touch 2G: iPod 2,1 iPod touch 3G: iPod 3,1 This can be used with idevicerestore (I haven't tried it though). http://github.com/posixninja/idevicerestore Based on: http://www.tuaw.com/2010/06/21/ios-4-0-firmware-release-expected-momentarily-quick-terminal-ti/ Show Sample Output
This is sample output - yours may be different.
```
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone4/061-7435.20100621.tr49t/iPod2,1_4.0_8A293_Restore.ipsw
```
-1

get-ipsw(){ curl -s -L http://phobos.apple.com/version | sed -rn "s|[\t ]*<string>(http://appldnld\.apple\.com\.edgesuite\.net/content\.info\.apple\.com/iPhone[0-9]?/[^/]*/$1$2_$3_[A-Z0-9a-z]*_Restore\.ipsw)</string>|\1|p" | uniq; }

matthewbauer · 2010-06-22 02:34:15 5

Get a file's type and metadata

Some shell newbies don't know this very handy file management related command so I decided to include it here. You need to have the "file" package installed. Show Sample Output

-1

file <filename>

lordtoran · 2011-11-19 23:39:29 3

list each file/directory size in a directory
This is sample output - yours may be different.
-1

ls | xargs -I{} du -sh {}

kenshin54 · 2013-07-28 04:18:25 8
Push current task to background (paused) and resume it.

Saves opening another console terminal (eg. CTRL+ALT+F[n]) or opening another remote terminal. Ctrl+Z pauses the current task and pushed it to the background, leaving you with a command prompt for those "Oh crap I forgot to change xyz before I ran that and it'll take forever if I Ctrl+C and start again..." situations. Typing 'fg' (shorthand for foreground, that's how I remember it) will resume the paused task. Show Sample Output
This is sample output - yours may be different.
```
$ dd if=/dev/zero of=test.file
^Z
[1]+  Stopped                 dd if=/dev/zero of=test.file
$ echo "I needed to do this."
I needed to do this.
$ fg
dd if=/dev/zero of=test.file
```
-1

<CTRL+Z>; fg

kbrotheridge · 2014-04-06 14:21:08 7
Use ping to test if a server is up

Bash scrip to test if a server is up, you can use this before wget'ing a file to make sure a blank one isn't downloaded.
This is sample output - yours may be different.
-1

if [ "$(ping -q -c1 google.com)" ];then wget -mnd -q http://www.google.com/intl/en_ALL/images/logo.gif ;fi

alf · 2010-03-23 04:15:03 10
Convert wma to wav
This is sample output - yours may be different.
-1

for i in *.wma; do mplayer -vo null -vc dummy -af resample=44100 -ao pcm:waveheader:file="${i%.wma}.wav" "$i" ; done

schef · 2011-01-18 14:41:17 3
Show seconds since modified of newest modified file in directory
This is sample output - yours may be different.
-1

echo $(( $( date +%s ) - $( stat -c %Y * | sort -nr | head -n 1 ) ))

depesz · 2011-05-12 14:29:45 3
lsof - cleaned up for just open listening ports, the process, and the owner of the process
This is sample output - yours may be different.
-1

alias oports="echo -e "User:\tCommand:\tPort:\n----------------------------" && lsof -i 4 -P -n | awk '/LISTEN/ {print $3, $1, $9}' | sed 's/ [a-z0-9\.\*]*:/ /' | sort -u -k 3 -n | xargs printf '%-10s %-10s %-10s\n'"

rthemocap · 2011-08-04 16:39:04 4
Get video information with ffmpeg

mp4box is great when working with mp4s
This is sample output - yours may be different.
-1

mp4box -info video.mp4

alienresident · 2013-01-18 14:43:29 5
Binary digits Matrix effect
This is sample output - yours may be different.
-1

perl -e 'use Term::ANSIColor;$|++; while (1) { print color("green")," " x (rand(35) + 1), int(rand(2)), color("reset") }'

mvrpl · 2017-04-26 14:05:48 20
bash function to check for something every 5 seconds

Every seconds do Show Sample Output
This is sample output - yours may be different.
```
Every 10,0s: ls /tmp                           Fri Sep  4 19:19:11 2009
...
<list of files>
```
-1

watch -n <seconds> <command>

aonick · 2009-09-04 15:19:42 3
‹ First < 463 464 465 466 467 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Copy via tar pipe while preserving file permissions (run this command as root!)

It's the same like 'cp -p' if available. It's faster over networks than scp. If you have to copy gigs of data you could also use netcat and the tar -z option in conjunction -- on the receiving end do: # nc -l 7000 | tar -xzvpf - ...and on the sending end do: # tar -czf - * | nc otherhost 7000

PulseAudio: set the volume via command line

If you have more than one SINK

Check wireless link quality with dialog box

The variable WIRELESSINTERFACE indicates your wireless interface

for ssh uptime

This will run them at the same time and timeout for each host in ten seconds. Also, mussh will append the ip addres to the beginning of the output so you know which host resonded with which time. The use of the sequence expression {1..50} is not specific to mussh. The `seq ...` works, but is less efficient.

Delete recursively only empty folders on present dir

Remove duplicate rows of an un-sorted file based on a single column

The command (above) will remove any duplicate rows based on the FIRST column of data in an un-sorted file. The '$1' represents a positional parameter. You can change both instances of '$1' in the command to remove duplicates based on a different column, for instance, the third: $ awk '{ if ($3 in stored_lines) x=1; else print; stored_lines[$3]=1 }' infile.txt > outfile.txt Or you can change it to '$0' to base the removal on the whole row: $ awk '{ if ($0 in stored_lines) x=1; else print; stored_lines[$0]=1 }' infile.txt > outfile.txt ** Note: I wouldn't use this on a MASSIVE file, unless you're RAM-rich ;) **

Save your sessions in vim to resume later

Creates a full snapshot of your current vim session, including tabs, open buffers, cursor positions, everything. Can be resumed with vim -S . Useful for those times when you HAVE to close vim, but you don't want to lose all your hard-opened buffers and windows. The ! will cause vim to overwrite the file if it already exists. It is not necessary, but useful if you frequently save to the same file (like session.vim or something).

Multiple variable assignments from command output in BASH

No command substitution but subshell redirection

Create an ISO Image from a folder and burn it to CD

Create an ISO Image from a folder and burn it to CD (Os X)

Get Dollar-Euro exchage rate

You can get others rates changing the "EUR/US" part. look at the url: wap.kitco.com/exrate.wml to get more options.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by