Commands by totti (87)

  • Matched string reference in replacement text

    Use matched data and some other as replacement data Show Sample Output


    0
    echo "abcde" | sed 's/./& /g'
    totti · 2011-08-26 16:54:26 7
  • Notify on Battery power

    Works on Laptops, Desktop having communication b/w UPS & CPU Show Sample Output


    0
    NotifyOnBATTERY () { while :; do on_ac_power||notify-send "Running on BATTERY"; sleep 1m; done }
    totti · 2011-08-26 11:54:16 7
  • Download a set of files that are numbered


    0
    for i in `seq -w 1 50`; do wget --continue \ http://commandline.org.uk/images/posts/animal/$i.jpg; done
    totti · 2011-08-19 20:06:16 5
  • Get full from half remembered commands

    Show all commands having the part known by you. Eg: apropos pdf | less Show Sample Output


    2
    apropos <part_rember> | less
    totti · 2011-08-19 19:34:57 6
  • Alternative for basename using grep to extract file name

    fileName /path/to/file.ext quivalent to basename /path/to/file.ext Show Sample Output


    -1
    fileName() { echo "$1" | grep -o "[^/]*$"; }
    totti · 2011-08-19 18:16:22 3
  • Boot block devices as virtual devices in Virtual Box

    eg: VBoxManage internalcommands createrawvmdk -filename ~/.VBox_sdc.vmdk -rawdisk /dev/sdc In order to start virtual box using block devices, ( Or to boot from it) run as ROOT sudo VirtualBox Then add & select the vmdk file as a device. At last Start the virtual box. - This cmd needs to run once for a device. - See command 8936 to run with out using ROOT power and easy handling of Virtual m/c


    0
    VBoxManage internalcommands createrawvmdk -filename [path/to/file/name.vmdk] -rawdisk /dev/[block_device]
    totti · 2011-08-19 14:26:22 8
  • Find all videos under current directory using MIME a.k.a not using extension

    Videos are found using their MIME type. Thus no need to for an extension for the video file. This is a efficent version of "jnash" cmd (4086). Thanks for jnash. This cmd will only show video files while his cmd show files having "video" anywhere in path. Show Sample Output


    1
    allVideos() { find ./ -type f -print0 | xargs -0 file -iNf - | grep ": video/" | cut -d: -f1; }
    totti · 2011-08-19 11:58:59 3
  • What is the use of this switch ?

    Find the usage of a switch with out searching through the entire man page. Usage: manswitch [cmd] [switch] Eg: manswitch grep silent ____________________________ In simple words man <cmd> | grep "\-<switch>" Eg: man grep | grep "\-o" This is not a standard method but works. Show Sample Output


    1
    manswitch() { man $1 | grep -A5 "^ *\-$2"; }
    totti · 2011-08-19 08:36:54 5
  • Sort output by column

    (separator = $IFS)


    2
    ps aux | sort -nk 6
    totti · 2011-08-16 11:04:45 3
  • Check if your webserver supports gzip compression with curl


    6
    curl -I -H "Accept-Encoding: gzip,deflate" http://example.org
    totti · 2011-08-16 10:32:01 4
  • Highlight network TX, RX information change


    5
    watch -n 2 -d '/sbin/ifconfig eth0'
    totti · 2011-08-16 10:29:34 4
  • Boot from a block device without giving root privilege to Virtual Box

    Usage: VBoxBlockBoot [Virtual_Machine] [Block_device] Eg: VBoxBlockBoot WinXP /dev/sdc In another words vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm Where vm --> Name of the virtual machine to start usb --> Block device to use. (/dev/sdc) This can used after setup up a boot loader on to my USB pen drive or HDD (After creating Live USB). Here root privilege is needed but not granted to Virtual Box. Thus we can access all our VM.( If we run VBox as root we can't access our VMs). Root privilege is used to - Unmount the storage device - Chmod to full access (777) Requirements:- 1. Device information file (rawvmdk file) created by the following command. Need to run only once. Not bad to run many. VBoxCreateRawDisk() { VBoxManage internalcommands createrawvmdk -filename ~/.rawHD4VB_`basename "$1"`.vmdk -rawdisk "$1"; } 2. Root privilege to umount & chmod 3. Real storage medium (ie /dev/*) (Non-virtual such as USB HD, pen drive, a partition) 4. A virtual m/c already available (here "usb") vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1"; } Show Sample Output


    0
    VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1";}
    totti · 2011-07-29 13:04:19 4
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Mount a VMware virtual disk (.vmdk) file on a Linux box
Assumes XP/2000/2003. For Server 2008+ try offset=105,906,176 You can find this number in the System Information utility under Partition Starting Offset. UEFI based boxes you want partition 2 since the first is just the boot files (and FAT). This works with (storage side) snapshots which is handy for single file restores on NFS mounted VMware systems

Open Remote Desktop (RDP) from command line having a custom screen size
This example uses xfreerdp, which builds upon the development of rdesktop. This example usage will also send you the remote machine's sound.

List processes sorted by CPU usage

faster version of ls *
I know its not much but is very useful in time consuming scripts (cron, rc.d, etc).

list block devices
Shows all block devices in a tree with descruptions of what they are.

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Record a screencast and convert it to an mpeg
Grab X11 input and create an MPEG at 25 fps with the resolution 800x600

Lists unambigously names of all xml elements used in files in current directory
This set of commands was very convenient for me when I was preparing some xml files for typesetting a book. I wanted to check what styles I had to prepare but coudn't remember all tags that I used. This one saved me from error-prone browsing of all my files. It should be also useful if one tries to process xml files with xsl, when using own xml application.

Recurse through directories easily
This is a simple case of recursing through all directories, adding the '.bak' extension to every file. Of course, the 'cp $file $file.bak' could be any code you need to apply to your recursion, including tests, other functions, creating variables, doing math, etc. Simple and clean recursion.

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: