Commands tagged LINES (6)

  • Run the alias command, then issue ps aux | head and resize your terminal window (putty/console/hyperterm/xterm/etc) then issue the same command and you'll understand. ${LINES:-`tput lines 2>/dev/null||echo -n 12`} Insructs the shell that if LINES is not set or null to use the output from `tput lines` ( ncurses based terminal access ) to get the number of lines in your terminal. But furthermore, in case that doesn't work either, it will default to using the deafault of 12 (-2 = 10). The default for HEAD is to output the first 10 lines, this alias changes the default to output the first x lines instead, where x is the number of lines currently displayed on your terminal - 2. The -2 is there so that the top line displayed is the command you ran that used HEAD, ie the prompt. Depending on whether your PS1 and/or PROMPT_COMMAND output more than 1 line (mine is 3) you will want to increase from -2. So with my prompt being the following, I need -7, or - 5 if I only want to display the commandline at the top. ( https://www.askapache.com/linux/bash-power-prompt/ ) 275MB/748MB [7995:7993 - 0:186] 06:26:49 Thu Apr 08 [askapache@n1-backbone5:/dev/pts/0 +1] ~ In most shells the LINES variable is created automatically at login and updated when the terminal is resized (28 linux, 23/20 others for SIGWINCH) to contain the number of vertical lines that can fit in your terminal window. Because the alias doesn't hard-code the current LINES but relys on the $LINES variable, this is a dynamic alias that will always work on a tty device. Show Sample Output


    27
    alias head='head -n $((${LINES:-`tput lines 2>/dev/null||echo -n 12`} - 2))'
    AskApache · 2010-04-08 22:37:06 14
  • SH

    cat mod_log_config.c | shmore or shmore < mod_log_config.c Most pagers like less, more, most, and others require additional processes to be loaded, additional cpu time used, and if that wasn't bad enough, most of them modify the output in ways that can be undesirable. What I wanted was a "more" pager that was basically the same as running: cat file Without modifying the output and without additional processes being created, cpu used, etc. Normally if you want to scroll the output of cat file without modifying the output I would have to scroll back my terminal or screen buffer because less modifies the output. After looking over many examples ranging from builtin cat functions created for csh, zsh, ksh, sh, and bash from the 80's, 90s, and more recent examples shipped with bash 4, and after much trial and error, I finally came up with something that satisifed my objective. It automatically adjusts to the size of your terminal window by using the LINES variable (or 80 lines if that is empty) so This is a great function that will work as long as your shell works, so it will work just find if you are booted in single user mode and your /usr/bin directory is missing (where less and other pagers can be). Using builtins like this is fantastic and is comparable to how busybox works, as long as your shell works this will work. One caveat/note: I always have access to a color terminal, and I always setup both the termcap and the terminfo packages for color terminals (and/or ncurses and slang), so for that reason I stuck the tput setab 4; tput setaf 7 command at the beginning of the function, so it only runs 1 time, and that causes the -- SHMore -- prompt to have a blue background and bright white text. This is one of hundreds of functions I have in my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html">.bash_profile at http://www.askapache.com/">AskApache.com, but actually won't be included till the next update. If you can improve this in any way at all please let me know, I would be very grateful! ( Like one thing I want is to be able to continue to the next screen by pressing any key instead of now having to press enter to continue) Show Sample Output


    6
    shmore(){ local l L M="`echo;tput setab 4&&tput setaf 7` --- SHMore --- `tput sgr0`";L=2;while read l;do echo "${l}";((L++));[[ "$L" == "${LINES:-80}" ]]&&{ L=2;read -p"$M" -u1;echo;};done;}
    AskApache · 2010-04-21 00:40:37 30
  • One of my favorite ways to impress newbies (and old hats) to the power of the shell, is to give them an incredibly colorful and amazing version of the top command that runs once upon login, just like running fortune on login. It's pretty sweet believe me, just add this one-liner to your ~/.bash_profile -- and of course you can set the height to be anything, from 1 line to 1000! G=$(stty -g);stty rows $((${LINES:-50}/2));top -n1; stty $G;unset G Doesn't take more than the below toprc file I've added below, and you get all 4 top windows showing output at the same time.. each with a different color scheme, and each showing different info. Each window would normally take up 1/4th of your screen when run like that - TOP is designed as a full screen program. But here's where you might learn something new today on this great site.. By using the stty command to change the terminals internal understanding of the size of your terminal window, you force top to also think that way as well. # save the correct settings to G var. G=$(stty -g) # change the number of rows to half the actual amount, or 50 otherwise stty rows $((${LINES:-50}/2)) # run top non-interactively for 1 second, the output stays on the screen (half at least) top -n1 # reset the terminal back to the correct values, and clean up after yourself stty $G;unset G This trick from my [ http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html bash_profile ], though the online version will be updated soon. Just think what else you could run like this! Note 1: I had to edit the toprc file out due to this site can't handle that (uploads/including code). So you can grab it from [ http://www.askapache.com/linux-unix/bash-power-prompt.html my site ] Note 2: I had to come back and edit again because the links weren't being correctly parsed Show Sample Output


    3
    G=$(stty -g);stty rows $((${LINES:-50}/2));top -n1; stty $G;unset G
    AskApache · 2010-04-22 18:52:49 13
  • At times I find that I need to loop through a file where each value that I need to do something with is not on a separate line, but rather separated with a ":" or a ";". In this instance, I create a loop within which I define 'IFS' to be something other than a whitespace character. In this example, I iterate through a file which only has one line, and several fields separated with ":". The counter helps me define how many times I want to repeat the loop.


    0
    while [[ COUNTER -le 10 && IFS=':' ]]; do for LINE in $(cat /tmp/list); do some_command(s) $LINE; done; COUNTER=$((COUNTER+1)); done
    slashdot · 2010-09-01 15:09:59 4
  • This will save parsing time for operations on very big files.


    0
    awk 'FNR==100 {print;exit}' file
    Testuser_01 · 2012-03-04 20:25:57 8

  • 0
    for i in $(git log --format='%ae' | sort -u); do echo $i; git log --author="$i" --pretty=tformat: --numstat | awk '{ add += $1; subs += $2; loc += $1 - $2 } END { printf "added lines: %s, removed lines: %s, total lines: %s\n", add, subs, loc }' - done
    flavioab · 2016-01-27 20:46:51 11

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

force unsupported i386 commands to work on amd64
The above was done using the i386 flashplayer plugin, and was installed on a AMD64 machine running an AMD64 kernel and AMD64 programs. the resulting plugin install ultimately didn't work for swiftfox (but worked for iceweasel) without also covering it with a nspluginwrapper which took a bit of fenangaling to get to work (lots of apt-getting) but it is a nice feature to be able to trick installers that think you need i386 into running on a amd64, or at least attempting to run on amd64. Enjoy

Gets the english pronunciation of a phrase
Usage examples: say hello say "hello world" say hello+world

Generat a Random MAC address
Generate a random MAC address with capital letters

Extract tarball from internet without local saving

Check whether laptop is running on battery or cable
The original proc file doesn't exist on my system.

Install pip with Proxy
Installs pip packages defining a proxy

Track X Window events in chosen window
After executing this, click on a window you want to track X Window events in. Explaination: "xev will track events in the window with the following -id, which we get by greping window information obtained by xwininfo"

dont execute command just add it to history as a comment, handy if your command is not "complete" yet

list files recursively by size

Get the IP address
gives u each configured IP in a seperate line.


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: