Commands using awk sorted by votes

Commands using awk (1,418)

sorted by

kill all processes using a directory/file/etc

This command will kill all processes using a directory. It's quick and dirty. One may also use a -9 with kill in case regular kill doesn't work. This is useful if one needs to umount a directory. Show Sample Output
This is sample output - yours may be different.
```
lsof|grep /data/| awk '{print $2}'|xargs kill
kill 1635: No such process
kill 1635: No such process
```
5

lsof|grep /somemount/| awk '{print $2}'|xargs kill

archlich · 2009-03-12 18:42:19 12
Play musical notes from octave of middle C

Are there any creative pieces of music that can be created using beep and the shell? I'd love to hear it!
This is sample output - yours may be different.
5

man beep | sed -e '1,/Note/d; /BUGS/,$d' | awk '{print $2}' | xargs -IX sudo beep -f X -l 500

jnash · 2009-04-01 06:48:48 10
List files above a given threshold

List files above a given size threshold. Show Sample Output
This is sample output - yours may be different.
```
./tapestry/tapestry-project-4.1.5-full.zip: 46M
./tapestry/tapestry-bin-5.1.0.1.zip: 29M
./tapestry/tapestry-bin-5.1.0.2.tar.bz2: 29M
./tapestry/tapestry-bin-5.1.0.0.zip: 29M
./tapestry/tapestry-project-4.1.3-full.tar.bz2: 27M
./tapestry/tapestry-bin-5.1.0.0.tar.gz: 29M
```
5

find . -type f -size +25000k -exec ls -lh {} \; | awk '{ print $8 ": " $5 }'

benajnim · 2009-04-02 15:01:17 8
Remove today's installed packages
This is sample output - yours may be different.
5

grep "install " /var/log/dpkg.log | awk '{print $4}' | xargs apt-get -y remove --purge

skygreg · 2009-04-06 13:06:04 10
get the top 10 longest filenames
This is sample output - yours may be different.
5

find | sed -e "s/^.*\///" | awk ' BEGIN { FS=""} { print NF " " $0 } ' | sort -nrf | head -10

nitehawk · 2009-04-13 21:03:07 5
Print IP of any interface. Useful for scripts.
This is sample output - yours may be different.
5

ip route show dev ppp0 | awk '{ print $7 }'

williamruckman · 2009-05-06 02:07:57 7
Get line number of all matches in a file
This is sample output - yours may be different.
5

awk '/match/{print NR}' file

inof · 2009-06-03 17:34:13 7
When was your OS installed?

shows also time if its the same year or shows year if installed before actual year and also works if /etc is a link (mac os) Show Sample Output
This is sample output - yours may be different.
```
Jul 15 11:46
or
Dec 24 2006
```
5

ls -lct /etc/ | tail -1 | awk '{print $6, $7, $8}'

peshay · 2009-09-04 16:52:50 5
(Git) Revert files with changed mode, not content

I sometimes (due to mismanagement!) end up with files in a git repo which have had their modes changed, but not their content. This one-liner lets me revert the mode changes, while leaving changed-content files be, so I can commit just the actual changes made.
This is sample output - yours may be different.
5

git diff --numstat | awk '{if ($1 == "0" && $2 == "0") print $3}' | xargs git checkout HEAD

lingo · 2009-09-17 22:12:50 11
print all except first collumn
This is sample output - yours may be different.
5

awk '{$1=""; print}'

hoberion · 2009-09-23 08:13:40 3
Get the total length of all videos in the current dir in H:m:s

You're behind on your TV catch-up, but how far behind? This command tries to open mplayer against all files in the current dir. If it's a video file it will contain ID_LENGTH, which is summed and output in hours, minutes and seconds. Someone better at awk could probably reduce this down a lot. Show Sample Output
This is sample output - yours may be different.
```
30529.18
8h:28m:49s
```
5

mplayer -vo dummy -ao dummy -identify * 2>&1 | grep ID_LENGTH | sed 's/.*=$[0-9]*$/\1/' | xargs echo | sed 's/ /+/g' | bc | awk 'S=$1; {printf "%dh:%dm:%ds\n",S/(60*60),S%(60*60)/60,S%60}'

Strawp · 2009-09-24 10:33:19 6

Plot frequency distribution of words from files on a terminal.

Uses the dumb terminal option in gnuplot to plot a graph of frequencies. In this case, we are looking at a frequency analysis of words in all of the .c files. Show Sample Output

This is sample output - yours may be different.

$ cat *.c | { printf "se te du\nplot '-' t '' w dots\n"; tr '[[:upper:]]' '[[:lower:]]' | tr -s [[:punct:][:space:]] '\n' | sort | uniq -c | sort -nr | head -n 100 | awk '{print $1}END{print "e"}'; } | gnuplot

  60 .+-----+------+------+------+-------+------+------+------+------+-----++
     +      +      +      +      +       +      +      +      +      +      +
     |                                                                      |
  50 ++                                                                    ++
     |                                                                      |
     |.                                                                     |
     |.                                                                     |
  40 ++                                                                    ++
     |                                                                      |
     | ..                                                                   |
  30 ++                                                                    ++
     |   .                                                                  |
     |                                                                      |
  20 ++  ..                                                                ++
     |     ..                                                               |
     |       ..                                                             |
     |         ...                                                          |
  10 ++           ....                                                     ++
     |                ...............                                       |
     +      +      +      +      +   .......................................+
   0 ++-----+------+------+------+-------+------+------+------+------+-----++
     0      10     20     30     40      50     60     70     80     90    100

cat *.c | { printf "se te du\nplot '-' t '' w dots\n"; tr '[[:upper:]]' '[[:lower:]]' | tr -s [[:punct:][:space:]] '\n' | sort | uniq -c | sort -nr | head -n 100 | awk '{print $1}END{print "e"}'; } | gnuplot

taliver · 2009-11-20 14:53:26 7

Weather on the Command line

Get your weather from a weather station just blocks from your home. Go to http://www.wunderground.com/wundermap/ and find a weather station near you. Click on a temperature bubble for that area. When the window pops up, click on hypertext link with the station ID, then on the bottom right of the page, click on the Current Conditions XML. Thats your link! Good luck! Show Sample Output
This is sample output - yours may be different.
```
53.1
```
5

lynx -dump http://api.wunderground.com/weatherstation/WXCurrentObXML.asp?ID=KCALOSAN32 | grep GMT | awk '{print $3}'

editorreilly · 2010-02-05 19:17:18 8
Get all mac address
This is sample output - yours may be different.
5

ifconfig | awk '/HWaddr/ { print $NF }'

unixmonkey8473 · 2010-02-27 20:20:12 6
Top ten (or whatever) memory utilizing processes (with children aggregate)

This command loops over all of the processes in a system and creates an associative array in awk with the process name as the key and the sum of the RSS as the value. The associative array has the effect of summing a parent process and all of it's children. It then prints the top ten processes sorted by size. Show Sample Output
This is sample output - yours may be different.
```
2472    NetworkManager
3624    getty
3888    hald
3948    nm-system-setti
3968    gdm
4012    bash
6384    sshd
14348   apache2
20560   console-kit-dae
22104   mysqld
```
5

ps axo rss,comm,pid | awk '{ proc_list[$2]++; proc_list[$2 "," 1] += $1; } END { for (proc in proc_list) { printf("%d\t%s\n", proc_list[proc "," 1],proc); }}' | sort -n | tail -n 10

d34dh0r53 · 2010-03-03 16:41:05 5
print all network interfaces' names and IPv4 addresses

ifconfig can't properly display interface's name longer 9 symbols,also it can't show IPs added thru ip command, so 'ip' should be used instead. This alias properly shows long names, bond interfaces and all interface aliases. loopback interface is ignored, since its IP is obvious Show Sample Output
This is sample output - yours may be different.
```
base0             10.0.2.15/24 
base0:1           192.168.0.1/27 
base0:managment   10.23.98.15/24 
vlan666           10.1.57.18/30 
vlan666:service   192.168.100.1/24 
```
5

alias ips='ip a | awk '\''/inet /&&!/ lo/{print $NF,$2}'\'' | column -t'

zolden · 2010-03-06 20:33:04 3
Capture screen and mic input using FFmpeg and ALSA

Yet another x11grab using ffmpeg. I also added mic input to the capturing video stream using alsa. Yet I need to find out how to capture audio which is currently playing. Show Sample Output
This is sample output - yours may be different.
```
http://www.youtube.com/watch?v=K3gOxtXN5wc
```
5

ffmpeg -f alsa -itsoffset 00:00:02.000 -ac 2 -i hw:0,0 -f x11grab -s $(xwininfo -root | grep 'geometry' | awk '{print $2;}') -r 10 -i :0.0 -sameq -f mp4 -s wvga -y intro.mp4

mohan43u · 2010-03-31 09:33:05 6
Show interface/ip using awk

Interfaces like lo can be omitted from the beginning, there are probably better ways of doing this, i'm a noob at awk. Show Sample Output
This is sample output - yours may be different.
```
lo 127.0.0.1
wlan0 192.168.1.100
```
5

ifconfig -a| awk '/^wlan|^eth|^lo/ {;a=$1;FS=":"; nextline=NR+1; next}{ if (NR==nextline) { split($2,b," ")}{ if ($2 ~ /[0-9]\./) {print a,b[1]}; FS=" "}}'

alf · 2010-04-15 04:34:28 16
Get IPv4 of eth0 for use with scripts

I've been using it in a script to build from scratch proxy servers. Show Sample Output
This is sample output - yours may be different.
```
192.168.0.1
```
5

ifconfig eth0 | grep "inet " | cut -d ':' -f2 | awk '{print $1}'

jaimerosario · 2010-06-29 00:06:08 4
Revert all modified files in an SVN repo
This is sample output - yours may be different.
5

svn st | grep -e '^M' | awk '{print $2}' | xargs svn revert

ethanmiller · 2010-08-11 14:24:05 3
Fibonacci numbers with awk

recursive version, "pure" AWK Show Sample Output
This is sample output - yours may be different.
```
0
1
1
2
3
5
8
13
21
34
55
89
144
233
377
610
987
1597
2584
4181
6765
10946
17711
28657
```
5

awk 'func f(n){return(n<2?n:f(n-1)+f(n-2))}BEGIN{while(a<24){print f(a++)}}'

unefunge · 2010-11-24 10:40:08 7
Retrieve the size of a file on a server

- Where $URL is the URL of the file. - Replace the $2 by $3 at the end to get a human-readable size. Credits to svanberg @ ArchLinux forums for original idea. Edit: Replaced command with better version by FRUiT. (removed unnecessary grep)
This is sample output - yours may be different.
5

wget --spider $URL 2>&1 | awk '/Length/ {print $2}'

d3Xt3r · 2011-07-03 00:14:58 10
Lists all usernames in alphabetical order

Save some CPU, and some PIDs. :)
This is sample output - yours may be different.
5

awk -F ':' '{print $1 | "sort";}' /etc/passwd

atoponce · 2011-12-20 12:46:52 3
Find duplicate UID in /etc/passwd

You can use only awk
This is sample output - yours may be different.
5

awk -F":" '!list[$3]++{print $3}' /etc/passwd

richard · 2012-01-24 12:47:52 8

Search for packages, ranked by popularity

This will take the packages matching a given `apt-cache search` query (a collection of AND'd words or regexps) and tell you how popular they are. This is particularly nice for those times you have to figure out which solution to use for e.g. a PDF reader or a VNC client. Substitute "ubuntu.com" for "debian.org" if you want this to use Ubuntu's data instead. Everything else will work perfectly. Show Sample Output

apt-popcon() { (echo \#rank; apt-cache search "$@" |awk '$1 !~ /^lib/ {print " "$1" "}') |grep -Ff- <(wget -qqO- http://popcon.debian.org/by_inst.gz |gunzip); }

adamhotep · 2012-09-08 00:29:31 4

‹ First < 4 5 6 7 8 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Follow a new friend on twitter

replace username, password, and nameofnewfriend with proper values. Remember to escape things like ! or & in your password

Undo commit in Mercurial

Mount a partition from within a complete disk dump

Suppose you made a backup of your hard disk with dd: dd if=/dev/sda of=/mnt/disk/backup.img This command enables you to mount a partition from inside this image, so you can access your files directly. Substitute PARTITION=1 with the number of the partition you want to mount (returned from sfdisk -d yourfile.img).

send kernel log (dmesg) notifications to root via cron

this is helpful because dmesg is where i/o errors, etc are logged to... you will also be able to see when the system reboots or someone attaches a thumb drive, etc. don't forget to set yourself up in /etc/aliases to get roots email.

Substitute an already running command

eg: Already running cmd $sleep 120 Substitution cmd $c=$(pgrep sleep) && sleep 5 && kill $c

Wait for an already launched program to stop before starting a new command.

Referring to the original post, if you are using $! then that means the process is a child of the current shell, so you can just use `wait $!`. If you are trying to wait for a process created outside of the current shell, then the loop on `kill -0 $PID` is good; although, you can't get the exit status of the process.

Select and Edit a File in the Current Directory

This command displays a simple menu of file names in the current directory. After the user made a choice, the command invokes the default editor to edit that file. * Without the break statement, the select command will loop forever * Setting the PS3 prompt is optional * If the user types an invalid choice (such as the letter q), then the variable $f will become an empty string. * For more information, look up the bash's select command

Nice weather forecast on your shell

Change Seville for your prefered city.

World Cup Live Score

World Cup Live Score of the ongoing match. Alternative to have the live score with the match statistics: $ watch -n10 --no-title "w3m http://www.livescore.com/ |awk '/live [0-9H]+[^ ]/,/red cards/'"

Open-iscsi target discovery

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using awk

Commands using awk (1,418) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using awk (1,418)

sorted by