Commands using perl (369)

  • Perl Command Line Interpreter

    Can also just use the debug mode like this. Show Sample Output


    1
    perl -dwe 1
    bashrc · 2011-05-05 20:28:03 6
  • Mark packages installed with build-dep for autoremove (on Debian/Ubuntu)

    Replace PACKAGE with desired package name. Found here: http://mikebeach.org/2011/04/undo-apt-get-build-dep/


    1
    sudo aptitude markauto $(apt-cache showsrc PACKAGE | grep Build-Depends | perl -p -e 's/(?:[\[(].+?[\])]|Build-Depends:|,|\|)//g')
    Lexton · 2011-05-08 14:18:52 6
  • Delete empty directories

    Recursively delete empty directories. Use with care.


    1
    perl -MFile::Find -e"finddepth(sub{rmdir},'.')"
    igorfu · 2011-05-23 08:45:34 7
  • Scan for [samba|lanman] NetBIOS names and ip addresses in LAN by ARP.


    1
    arp-scan -I eth0 -l | perl -ne '/((\d{1,3}\.){3}\d{1,3})/ and $ip=$1 and $_=`nmblookup -A $ip` and /([[:alnum:]-]+)\s+<00>[^<]+<ACTIVE>/m and printf "%15s %s\n",$ip,$1'
    bandie91 · 2011-07-08 07:41:41 3
  • Syntax Highlight your Perl code


    1
    perl -mText::Highlight -E 'say Text::Highlight->new(ansi => 1)->highlight(Perl => do { local (@ARGV,$/) = shift; <> }) ' path/to/perl-file.pl
    dbr · 2011-07-12 04:55:12 5
  • change microdvd subtitles framerate

    this command example converts to 25 fps subtitles that were originally created for 24 fps movie


    1
    cat subtitles.txt | perl -pe 's/} /}/g; s/{(\d+)}/=1=/; $f1=(24/25*$1); s/{(\d+)}/=2=/; $f2=(24/25*$1); $f1=~s/\..*//; $f2=~s/\..*//; s/=1=/{$f1}/; s/=2=/{$f2}/; ' > subtitles_newfps.txt
    ciekawy · 2011-07-30 15:34:43 18
  • Lookup errno defintions

    Calls the POSIX strerror() function to look up the meaning of integer ERRNOs set by some functions.


    1
    perl -MPOSIX -e 'print strerror($ARGV[0])."\n";' ERRNO
    sethjust · 2011-09-21 18:16:19 5
  • Multiline Search/Replace with Perl

    from http://stackoverflow.com/questions/1030787/multiline-search-replace-with-perl added greedy trick in wildcard match (.*?) from http://www.troubleshooters.com/codecorn/littperl/perlreg.htm#Greedy Show Sample Output


    1
    perl -i -pe 'BEGIN{undef $/;} s/START.*?STOP/replace_string/smg' file_to_change
    hute37 · 2011-10-05 11:22:36 10
  • one-line log format for svn

    the output of svn log is annoying to grep, since it spreads the useful info over multiple lines. This compacts the output down to one line so eg you can grep for a comment and see the rev, date & committer straight away. Updated: MUCH shorter, easier to remember. Now it just replaces newlines with spaces, except on '---' lines. Show Sample Output


    1
    svn log | perl -l40pe 's/^-+/\n/'
    bazzargh · 2011-10-14 16:02:22 6
  • wc in perl


    1
    perl -ane 'END{printf(" %d %d %d\n", $x, $y, $z)} $x+=1; $y+=@F; $z+=length' file.txt
    kev · 2011-10-24 06:14:02 10
  • Create new user with home dir and given password

    The crypt function takes a password, key, as a string, and a salt character array which is described below, and returns a printable ASCII string which starts with another salt. It is believed that, given the output of the function, the best way to find a key that will produce that output is to guess values of key until the original value of key is found. from http://en.wikipedia.org/wiki/Crypt_(Unix)


    1
    useradd -m -p $(perl -e'print crypt("passwordscelta", "stigghiola")') user
    0disse0 · 2012-02-06 19:53:01 7
  • One line Perl Script to determine the largest file sizes on a Linux Server

    This one line Perl script will display the smallest to the largest files sizes in all directories on a server. Show Sample Output


    1
    du -k | sort -n | perl -ne 'if ( /^(\d+)\s+(.*$)/){$l=log($1+.1);$m=int($l/log(1024)); printf ("%6.1f\t%s\t%25s %s\n",($1/(2**(10*$m))),(("K","M","G","T","P")[$m]),"*"x (1.5*$l),$2);}' | more
    Q_Element · 2012-02-07 15:49:19 10
  • Tracklist reaplace backspace to '-'

    Requires perl 5.14 or greater


    1
    perl -e 'rename $_, s/ /-/gr for <*.mp3>'
    ironcamel · 2012-02-21 17:07:18 4
  • Perl oneliner to print access rights in octal format

    This prints file access rights in octal - useful when "stat" is unavailable. Show Sample Output


    1
    perl -e 'printf "%04o\n", (stat shift)[2] & 0777;' file
    zlemini · 2012-03-22 15:05:04 9
  • multiline data block parse and CSV data extraction with perl

    extract data in multiline blocks of data with perl pattern matching loop Show Sample Output


    1
    cat z.log | perl -ne 'BEGIN{ print "DATE;RATE\n"; } /\[(\d.*)\]/ && print $1; /CURRENT RATE: +(\S+) msg.*/ && print ";" .$1 . "\n"; '
    hute37 · 2012-04-03 13:52:20 3
  • Perl One Liner to Generate a Random IP Address


    1
    perl -e 'printf "00:16:3E:%02X:%02X:%02X\n", rand 0xFF, rand 0xFF, rand 0xFF'
    Gular · 2012-07-02 09:59:43 5
  • Encode file path to URL

    Really helpfull when play with files having spaces an other bad name. Easy to store and access names and path in just a field while saving it in a file. This format (URL) is directly supported by nautilus and firefox (and other browsers) Show Sample Output


    1
    convert_path2uri () { echo -n 'file://'; echo -n "$1" | perl -pe 's/([^a-zA-Z0-9_\/.])/sprintf("%%%.2x", ord($1))/eg' ;} #convert2uri '/tmp/a b' ### convert file path to URI
    totti · 2013-07-01 08:54:45 7
  • Update a namecheap @ A record to point to your current internet-facing IP address

    Sets the @ A record for your domain hosted by namecheap to your current internet-facing IP address, logs success or failure with syslog, and logs the data returned to /root/dnsupdate. Change the XXX's as appropriate. More info at: http://www.namecheap.com/support/knowledgebase/article.aspx/29/ Show Sample Output


    1
    logger -tdnsupdate $(curl -s 'https://dynamicdns.park-your-domain.com/update?host=@&domain=xxx&password=xxx'|tee -a /root/dnsupdate|perl -pe'/Count>(\d+)<\/Err/;$_=$1eq"0"?"Update Sucessful":"Update failed"'&&date>>/root/dnsupdate)
    MagisterQuis · 2013-08-11 16:27:39 7
  • send raw data (hex written)using UDP to an IP and port

    Use it to send raw data to a networked device. Used to interact with relay controller board whose documentation is lost, so use wireshark to sniff the sent data and replayed using the command.


    1
    echo -n 023135 | perl -pe 's/([0-9a-f]{2})/chr hex $1/gie' | nc -4u -q1 -p5001 192.168.0.100 2000
    sucotronic · 2013-09-18 14:31:47 7
  • Convert control codes to visible Unicode Control Pictures

    Converts control codes and spaces (ASCII code ≤ 32) to visible Unicode Control Pictures, U+2400 ? U+2420. Skips \n characters, which is probably a good thing. Show Sample Output


    1
    /bin/echo -e '\002Hello, Folks\t!\r' | perl -pwle 'use v5.14; s/([\N{U+0000}-\N{U+0020}])/chr(9216+ord($1))/ge;'
    scruss · 2014-06-30 01:45:40 11
  • drop first column of output by piping to this

    An advantage is that this doesn't modify remained string at all. One can change {0,1} with {0,n} to drop several columns


    1
    perl -pE's/(\S+\s*){0,1}//'
    pung96 · 2015-05-09 15:14:58 12
  • Get all shellcode on binary file from objdump

    Better than the others, and actually works unlike some of them. Show Sample Output


    1
    objdump -d $1 | grep -Po '\s\K[a-f0-9]{2}(?=\s)' | sed 's/^/\\x/g' | perl -pe 's/\r?\n//' | sed 's/$/\n/'
    Daytona · 2015-05-23 01:21:58 10
  • Get the SAN (subjectAltName) of a site's certificate.

    Based on http://stackoverflow.com/questions/13127352/checking-alternative-names-for-a-san-ssl-cert Replace "facebook.com" with the desired hostname. Show Sample Output


    1
    echo "quit" | openssl s_client -connect facebook.com:443 | openssl x509 -noout -text | grep "DNS:" | perl -pe "s/(, )?DNS:/\n/g"
    lgarron · 2015-08-13 22:50:45 9
  • Find all file extension in current dir.


    1
    find . -type f | perl -ne 'print $1 if m/\.([^.\/]+)$/' | sort -u
    wuseman1 · 2018-11-11 01:09:42 542
  • Calculate the mean or average of a single column of numbers in a text file

    single-column-numbers.txt is a text file with 22658 rows (numbers) in a single column. Each number can range from 0 to 134298679.533591 and the dot is for the decimals. This is done with perl because awk can't sum such high numbers. Show Sample Output


    1
    perl -lane '$total += $F[0]; END{print $total/$.}' single-column-numbers.txt
    bugmenot · 2021-06-30 07:45:56 173
  • ‹ First  < 5 6 7 8 9 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Realy remove file from your drive
This command remove a file from your filesystem like the normal rm command but instead of deleting only the inode information this also delete the data that was stored on blocks /!\ warning this may be long for large files

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

force unsupported i386 commands to work on amd64
The above was done using the i386 flashplayer plugin, and was installed on a AMD64 machine running an AMD64 kernel and AMD64 programs. the resulting plugin install ultimately didn't work for swiftfox (but worked for iceweasel) without also covering it with a nspluginwrapper which took a bit of fenangaling to get to work (lots of apt-getting) but it is a nice feature to be able to trick installers that think you need i386 into running on a amd64, or at least attempting to run on amd64. Enjoy

Mount a disk image (dmg) file in Mac OSX
To unmount, replace "attach" with "eject"

find text in a file
this will find text in the directory you specify and give you line where it appears.

SVN Command line branch merge
This will merge all of the changes from {rev_num} to head on the branch to the current working directory

Check if *hardware* is 32bit or 64bit
This command tell you if your hardware is 32 or 64 bits even if you install a 32bits OS on a 64 bits hardware. If your distro don't support the -q switch, try doing : $ grep &>/dev/null '\' /proc/cpuinfo && echo 64 bits || echo 32 bits

awk date convert
Convert readable date/time with `date` command

Change files case, without modify directories, recursively
Change files case, without modify directories, recursively. ... fucking vfat

Script Terminal Session
script -f /tmp/foo will place all output of the terminal, including carriage returns, to a file. This file can be tail dash-eff'ed by one or more other terminals to display the information of the main terminal. Good way to share one's screen on short notice. Note: This produces a very accurate output, but that includes depending on the size of your terminal to be the same. You can clear screens or even resize the terminal for others using this function; I use it in conjunction with the "mid" command in my list.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: