Commands matching nmap (86)


  • 0
    sudo nmap -sU -p 53 8.8.8.8
    aysadk · 2017-08-16 19:59:18 17

  • 0
    nmap find alive hosts
    aysadk · 2017-08-17 11:04:08 14
  • List all your public IPs in an EC2/AWS region, and run an nmap scan against them (ignoring ping response). Requires: aws cli, jq for shell JSON processing Show Sample Output


    0
    nmap -P0 -sV `aws --output json ec2 describe-addresses | jq -r '.Addresses[].PublicIp'` | tee /dev/shm/nmap-output.txt
    NightMonkey · 2017-08-18 17:55:13 17

  • 0
    nmap -sn 192.168.1.0/24
    aysadk · 2017-10-04 11:19:43 20
  • Trying to check for an open port and missing netcat or nmap? This is the lowest common denominator way to verify a port is accessible from one server to another. This will give you a pretty quick return of 0 if it works. If it fails, it will just hang and takes awhile to timeout. I usually ctrl+c the command. "echo ?$" will give you an exit code other then 0 after you exit. Show Sample Output


    0
    cat < /dev/null > /dev/tcp/<hostname or ip>/<port>; echo $?
    pborowicz · 2018-02-14 15:51:51 36
  • This is helpful if you connect to several networks with different subnets such as 192 networks, 10 networks, etc. Cuts first three octets of ip from ifconfig command and runs nmap ping scan on that subnet. Replace wlan0 with your interface. Assumes class c network, if class b use: cut -d "." -f 1-2 and change nmap command accordingly.


    -1
    dhclient wlan0 && sbnt=$(ifconfig wlan0 |grep "inet addr" |cut -d ":" -f 2 | cut -d "." -f 1-3) && nmap $sbnt.0/24 -sP
    wltj · 2010-06-22 21:00:29 6
  • Today many hosts are blocking traditional ICMP echo replay for an "security" reason, so nmap's fast ARP scan is more usable to view all live IPv4 devices around you. Must be root for ARP scanning.


    -1
    nmap -sP -PR -oG - `/sbin/ip -4 addr show | awk '/inet/ {print $2}' | sed 1d`
    l3k · 2011-07-21 11:50:26 3
  • Not really an easier solution. But an example using && for (if last command returned 0). You can use || for (if last command returned other than 0).. Show Sample Output


    -2
    prefix="10.0.0" && for i in `seq 25`; do ping -c 1 $prefix.$i &> /dev/null && echo "Answer from: $prefix.$i" ; done
    xeor · 2010-04-07 17:17:21 4

  • -2
    nmap -sS -O -v -oS - 192.168.2.0/24
    ene2002 · 2014-01-31 18:04:06 151
  • Displays live hosts on the same network as the local machine with their hostnames and IP addresses. This command is IPv6 and multiple network adapter safe and does not rely on awk or sed, however it requires the "nmap" package installed. Might not work on OSX. Example alias for shell startup file: alias livehosts='nmap -sP "$(ip -4 -o route get 1 | cut -d " " -f 7)"/24 | grep report | cut -d " " -f 5-' Show Sample Output


    -2
    nmap -sP "$(ip -4 -o route get 1 | cut -d ' ' -f 7)"/24 | grep report | cut -d ' ' -f 5-
    lordtoran · 2019-02-01 03:52:02 33
  • Just copy and paste the code in your terminal. Note : sudo apt-get for debian versions , change as per your requirement . Source : www.h3manth.com


    -6
    sudo wget -c "http://nmap.org/dist/nmap-5.00.tar.bz2" && bzip2 -cd nmap-5.00.tar.bz2 | tar xvf - && cd nmap-5.00 && ./configure && make && sudo make install
    hemanth · 2009-07-26 11:36:53 7
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands


Check These Out

Define shell variable HISTIGNORE so that comments (lines starting with #) appear in shell history
I was surprised to find that with RedHat bash, I could not find any comment lines (begining with #) in my bash shell history. Surprised because in Mageia Linux this works. It turns out that RedHat's bash will keep comment lines if in my .bashrc, I define: export HISTIGNORE=' cd "`*: PROMPT_COMMAND=?*?' Why have comment lines in shell history? It's a handy and convenient way to make proto-commands (to be completed later) and for storing brief text data that is searchable in shell history.

Use find to get around Argument list too long problem
Can be used for other commands as well, replace rm with ls. It is easy to make this shorter but if the filenames involved have spaces, you will need to do use find's "-print0" option in conjunction with xargs's "-0" option. Otherwise the shell that xargs uses to execute the "rm" command line will treat the space as a token separator, thereby treating the name as two (or more) names.

Convert CSV to JSON
Replace 'csv_file.csv' with your filename.

Retrieve the size of a file on a server
Downloads the entire file, but http servers don't always provide the optional 'Content-Length:' header, and ftp/gopher/dict/etc servers don't provide a filesize header at all.

Sort all running processes by their memory & CPU usage
you can also pipe it to "tail" command to show 10 most memory using processes.

Calculate pi to an arbitrary number of decimal places

BourneShell: Go to previous directory
cd - would return to the previous directory of your cd command. NB: previous dir is always stored in $OLDPWD variable.

Change pidgin status
Thanks for the comment oshazard, i wasn't aware of purple-remote existence.

Find files with size over 100MB and output with better lay-out

Convert all Flac in a directory to Mp3 using maximum quality variable bitrate


Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: