Commands matching nmap (86)

  • nmap check port


    0
    sudo nmap -sU -p 53 8.8.8.8
    aysadk · 2017-08-16 19:59:18 17
  • nmap -sP 192.168.1.*


    0
    nmap find alive hosts
    aysadk · 2017-08-17 11:04:08 14
  • nmap all my hosts in EC2

    List all your public IPs in an EC2/AWS region, and run an nmap scan against them (ignoring ping response). Requires: aws cli, jq for shell JSON processing Show Sample Output


    0
    nmap -P0 -sV `aws --output json ec2 describe-addresses | jq -r '.Addresses[].PublicIp'` | tee /dev/shm/nmap-output.txt
    NightMonkey · 2017-08-18 17:55:13 17
  • nmap get active devices


    0
    nmap -sn 192.168.1.0/24
    aysadk · 2017-10-04 11:19:43 20
  • check open network port with cat

    Trying to check for an open port and missing netcat or nmap? This is the lowest common denominator way to verify a port is accessible from one server to another. This will give you a pretty quick return of 0 if it works. If it fails, it will just hang and takes awhile to timeout. I usually ctrl+c the command. "echo ?$" will give you an exit code other then 0 after you exit. Show Sample Output


    0
    cat < /dev/null > /dev/tcp/<hostname or ip>/<port>; echo $?
    pborowicz · 2018-02-14 15:51:51 36
  • Autofind alive hosts on subnet upon connect

    This is helpful if you connect to several networks with different subnets such as 192 networks, 10 networks, etc. Cuts first three octets of ip from ifconfig command and runs nmap ping scan on that subnet. Replace wlan0 with your interface. Assumes class c network, if class b use: cut -d "." -f 1-2 and change nmap command accordingly.


    -1
    dhclient wlan0 && sbnt=$(ifconfig wlan0 |grep "inet addr" |cut -d ":" -f 2 | cut -d "." -f 1-3) && nmap $sbnt.0/24 -sP
    wltj · 2010-06-22 21:00:29 6
  • Display only hosts up in network

    Today many hosts are blocking traditional ICMP echo replay for an "security" reason, so nmap's fast ARP scan is more usable to view all live IPv4 devices around you. Must be root for ARP scanning.


    -1
    nmap -sP -PR -oG - `/sbin/ip -4 addr show | awk '/inet/ {print $2}' | sed 1d`
    l3k · 2011-07-21 11:50:26 3
  • Ping scanning without nmap

    Not really an easier solution. But an example using && for (if last command returned 0). You can use || for (if last command returned other than 0).. Show Sample Output


    -2
    prefix="10.0.0" && for i in `seq 25`; do ping -c 1 $prefix.$i &> /dev/null && echo "Answer from: $prefix.$i" ; done
    xeor · 2010-04-07 17:17:21 4
  • NMAP_UNDERGROUND_VECTRA

    Show Sample Output


    -2
    nmap -sS -O -v -oS - 192.168.2.0/24
    ene2002 · 2014-01-31 18:04:06 151
  • Display live hosts on the network

    Displays live hosts on the same network as the local machine with their hostnames and IP addresses. This command is IPv6 and multiple network adapter safe and does not rely on awk or sed, however it requires the "nmap" package installed. Might not work on OSX. Example alias for shell startup file: alias livehosts='nmap -sP "$(ip -4 -o route get 1 | cut -d " " -f 7)"/24 | grep report | cut -d " " -f 5-' Show Sample Output


    -2
    nmap -sP "$(ip -4 -o route get 1 | cut -d ' ' -f 7)"/24 | grep report | cut -d ' ' -f 5-
    lordtoran · 2019-02-01 03:52:02 33
  • Install NMAP 5.0 ,Short and sweet command to do it

    Just copy and paste the code in your terminal. Note : sudo apt-get for debian versions , change as per your requirement . Source : www.h3manth.com


    -6
    sudo wget -c "http://nmap.org/dist/nmap-5.00.tar.bz2" && bzip2 -cd nmap-5.00.tar.bz2 | tar xvf - && cd nmap-5.00 && ./configure && make && sudo make install
    hemanth · 2009-07-26 11:36:53 7
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

batch convert Nikon RAW (nef) images to JPG
converts RAW files from a Nikon DSLR to jpg for easy viewing etc. requires ufraw package

list current ssh clients

Change user within ssh session retaining the current MIT cookie for X-forwarding
When you remotely log in like "ssh -X userA:host" and become a different user with "su UserB", X-forwarding will not work anymore since /home/UserB/.Xauthority does not exist. This will use UserA's information stored in .Xauthority for UserB to enable X-forwarding. Watch http://prefetch.net/blog/index.php/2008/04/05/respect-my-xauthority/ for details.

Convert multiple flac files to mp3
make sure that flac and lame are installed sudo apt-get install lame flac

High resolution video screen recording
$ gorecord foo.mp4 I've tried all of the screen recorders available for Linux and this is easily the best. xvidcap segfaults; VNC is too much hassle. There are alternatives of this command already here that I am just too lazy to reply to. Messing with the frames per second option, -r, 25 seems to be the best. Any lower and the video will look like a flipbook, if it records at all - -r 10 won't - any faster is the same, oddly enough. Edit: CLF doesn't like my long command to add audio, so here it is in the description. $ goaddaudio() ${ $if [ $# != 3 ]; then $ echo 'goaddaudio < audio > < src video > < dst video >' $ return $ fi $ $ f=goaddaudio$RANDOM $ ffmpeg -i "$2" &> $f $ d=$( grep Duration $f | awk '{print $2}' | tr -d ',' ) && $ rm $f && $ ffmpeg -i "$1" -i "$2" -r 25 -ab 192k -ar 44100 -sameq -t $d "$3" $}

Do quick arithmetic on numbers from STDIN with any formatting using a perl one liner.
Good for summing the numbers embedded in text - a food journal entry for example with calories listed per food where you want the total calories. Use this to monitor and keep a total on anything that ouputs numbers.

count how many times a string appears in a (source code) tree
grep -o puts each occurrence in a separate line

Mount directories in different locations
Like symlinked directories, you can mount a directory at a different location. For example mounting a directory from one location in to the http root without having to make your program follow symlinks or change permissions when reading.

Lookup hostname for IP address

Find the package that installed a command

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: