All commands (14,187)

  • Get your external IP address


    -4
    wget -q -O - checkip.dyndns.org|sed -e 's/.*Current IP Address: //' -e 's/<.*$//'
    sanjaygoel · 2009-11-06 10:18:26 3
  • geoip information

    That makes a function you can put in your ~/.bashrc to run it when you need in any term with an IP as argument Show Sample Output


    3
    GeoipLookUp(){ curl -A "Mozilla/5.0" -s "http://www.geody.com/geoip.php?ip=$1" | grep "^IP.*$1" | html2text; }
    sputnick · 2009-11-06 00:32:27 4
  • Press Any Key to Continue

    Halt script progress until a key has been pressed. Source: http://bash-hackers.org/wiki/doku.php/mirroring/bashfaq/065


    25
    read -sn 1 -p "Press any key to continue..."
    kalaxy · 2009-11-05 21:53:23 11
  • umount all nfs mounts on machine


    8
    umount -a -t nfs
    sdadh01 · 2009-11-05 20:57:32 5
  • Get ethX mac addresses

    Simple MAC adrress, thanks to ifconfig.


    0
    ifconfig | awk '/HW/ {print $5}'
    Cont3mpo · 2009-11-05 18:00:50 4
  • umount all nfs mounts on machine


    -2
    mount | awk '/:/ { print $3 } ' | xargs sudo umount
    uid0 · 2009-11-05 17:19:11 3
  • Get ethX mac addresses

    ...or for a particular interface...


    0
    ip link show eth0 | grep "link/ether" | awk '{print $2}'
    maxmanders · 2009-11-05 17:06:15 3
  • Build an exhaustive list of maildir folders for mutt

    Of course, you can adjust "Maildir" to your config... Show Sample Output


    1
    find ~/Maildir/ -mindepth 1 -type d | egrep -v '/cur$|/tmp$|/new$' | xargs
    ook · 2009-11-05 14:11:29 3
  • List the CPU model name

    Alternative command to retrieve the CPU model name and strip off the "model name : " labels. Show Sample Output


    0
    sed -n 's/^model name[ \t]*: *//p' /proc/cpuinfo
    jgc · 2009-11-05 10:59:31 4
  • convert a latex source file (.tex) into opendocument (.odt ) format

    require the tex4ht package . You can open the file with openoffice , I use it much for correct my spelling and grammar . Show Sample Output


    2
    htlatex MyFile.tex "xhtml,ooffice" "ooffice/! -cmozhtf" "-coo -cvalidate"
    eastwind · 2009-11-05 10:12:28 5
  • List the CPU model name

    Extracts the model name of the CPU and displays it on screen. Show Sample Output


    3
    grep "model name" /proc/cpuinfo
    getkaizer · 2009-11-05 05:23:30 4
  • Test speaker channels

    Useful tool to test if all speaker channels are working properly. speaker-test is part of alsa-utils package Show Sample Output


    5
    speaker-test -D plug:surround51 -c 6 -l 1 -t wav
    alperyilmaz · 2009-11-05 02:57:46 3
  • Get your external IP address

    For those of us that still uses lynx :)


    -5
    lynx --dump http://ip.boa.nu|sed -e 's/^[[:space:]]*//' -e 's/*[[:space:]]$//'|grep -v ^$
    xeor · 2009-11-04 22:23:45 3
  • Get your external IP address

    Using our beloved wget


    -6
    wget -O - -q ip.boa.nu
    xeor · 2009-11-04 22:22:04 3
  • Get your external IP address


    -3
    curl whatismyip.org
    m8t · 2009-11-04 21:40:31 3
  • Get ethX mac addresses

    I much prefer using /sbin/ip over /sbin/ifconfig for most everything. I find the interface and output to be much more consistent and it has many abilities that ifconfig, route, etc. do not. To get the mac address for only one interface, add 'show dev [interface]' to the 'ip link' part of the command: ip link show dev eth0 | grep 'link/ether' | awk '{print $2}' . Also, both this command and the ifconfig one do not require root access to run, so the sudo is not necessary. Show Sample Output


    1
    ip link | grep 'link/ether' | awk '{print $2}'
    markdrago · 2009-11-04 19:41:26 19
  • Get ethX mac addresses

    Show Sample Output


    -2
    sudo ifconfig -a | grep eth | grep HW | cut -d' ' -f11
    rubenmoran · 2009-11-04 19:24:35 3
  • Sum of the total resident memory Stainless.app is using.

    Adds up the total memory used by all Stainless processes: 1 Stainless, 1 StainlessManager and 1 StainlessClient per tab open. Show Sample Output


    0
    ps -ec -o command,rss | grep Stainless | awk -F ' ' '{ x = x + $2 } END { print x/(1024) " MB."}'
    unixmonkey6893 · 2009-11-04 19:01:22 6
  • Get your external IP address with the best commandlinefu.com command

    This command uses the top voted "Get your external IP" command from commandlinefu.com to get your external IP address. Use this and you will always be using the communities favourite command. This is a tongue-in-cheek entry and not recommended for actual usage.


    -1
    eval $(curl -s http://www.commandlinefu.com/commands/matching/external/ZXh0ZXJuYWw=/sort-by-votes/plaintext|sed -n '/^# Get your external IP address$/{n;p;q}')
    jgc · 2009-11-04 16:58:31 6
  • Get your external IP address with a random commandlinefu.com command

    There's been so many ways submitted to get your external IP address that I decided we all need a command that will just go pick a random one from the list and run it. This gets a list of "Get your external IP" commands from commanlinefu.com and selects a random one to run. It will run the command and print out which command it used. This is not a serious entry, but it was a learning exercise for me writing it. My personal favourite is "curl icanhazip.com". I really don't think we need any other ways to do this, but if more come you can make use of them with this command ;o). Here's a more useful command that always gets the top voted "External IP" command, but it's not so much fun: eval $(curl -s http://www.commandlinefu.com/commands/matching/external/ZXh0ZXJuYWw=/sort-by-votes/plaintext|sed -n '/^# Get your external IP address$/{n;p;q}') Show Sample Output


    3
    IFS=$'\n';cl=($(curl -s http://www.commandlinefu.com/commands/matching/external/ZXh0ZXJuYWw=/sort-by-votes/plaintext|sed -n '/^# Get your external IP address$/{n;p}'));c=${cl[$(( $RANDOM % ${#cl[@]} ))]};eval $c;echo "Command used: $c"
    jgc · 2009-11-04 16:55:44 9
  • Make sure a script is run in a terminal.

    If your script needs to be run in a terminal, this line at the top will stop it running if you absent-mindedly double-click the icon, perhaps intending to edit it. (Of course this won't help with scripts that run in the background.)


    0
    tty > /dev/null 2>&1 || { aplay error.wav ; exit 1 ;}
    johnraff · 2009-11-04 16:18:00 6
  • geoip information

    Not my script. Belongs to mathewbauer. Used without his permission. This script gives a single line as shown in the sample output. NOTE: I have blanked out the IP address for obvious security reasons. But you will get whatever is your IP if you run the script. Tested working in bash. Show Sample Output


    10
    curl -s "http://www.geody.com/geoip.php?ip=$(curl -s icanhazip.com)" | sed '/^IP:/!d;s/<[^>][^>]*>//g'
    getkaizer · 2009-11-04 07:15:02 11
  • Commit only newly added files to subversion repository


    4
    svn ci `svn stat |awk '/^A/{printf $2" "}'`
    realist · 2009-11-04 03:30:07 3
  • Binary Clock

    Create a binary clock. Show Sample Output


    36
    watch -n 1 'echo "obase=2;`date +%s`" | bc'
    matthewbauer · 2009-11-04 02:04:00 14
  • Figure out your work output for the day

    Figures out what has changed in the last 12 hours. Change the author to yourself, change the time since to whatever you want. Show Sample Output


    3
    git diff --stat `git log --author="XXXXX" --since="12 hours ago" --pretty=oneline | tail -n1 | cut -c1-40` HEAD
    askedrelic · 2009-11-04 01:41:33 3
  • ‹ First  < 430 431 432 433 434 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

ThePirateBay.org torrent search
This one-liner greps first 30 direct URLs for .torrent files matching your search querry, ordered by number of seeds (descending; determined by the second number after your querry, in this case 7; for other options just check the site via your favorite web-browser). You don't have to care about grepping the torrent names as well, because they are already included in the .torrent URL (except for spaces and some other characters replaced by underscores, but still human-readable). Be sure to have some http://isup.me/ macro handy (someone often kicks the ethernet cables out of their servers ;) ). I've also coded a more user-friendly ash (should be BASH compatible) script, which also lists the total size of download and number of seeds/peers (available at http://saironiq.blogspot.com/2011/04/my-shell-scripts-4-thepiratebayorg.html - may need some tweaking, as it was written for a router running OpenWrt and transmission). Happy downloading!

back ssh from firewalled hosts
host B (you) redirects a modem port (62220) to his local ssh. host A is a remote machine (the ones that issues the ssh cmd). once connected port 5497 is in listening mode on host B. host B just do a ssh 127.0.0.1 -p 5497 -l user and reaches the remote host'ssh. This can be used also for vnc and so on.

Recursively list all of the files in a directory, group them by extension and calculate the average of the file sizes in each group
Here's an annotated version of the command, using full-names instead of aliases. It is exactly equivalent to the short-hand version. # Recursively list all the files in the current directory. Get-ChildItem -Recurse | # Filter out the sub-directories themselves. Where-Object { return -not $_.PsIsContainer; } | # Group the resulting files by their extensions. Group-Object Extension | # Pluck the Name and Count properties of each group and define # a custom expression that calculates the average of the sizes # of the files in that group. # The back-tick is a line-continuation character. Select-Object ` Name, Count, @{ Name = 'Average'; Expression = { # Average the Length (sizes) of the files in the current group. return ($_.Group | Measure-Object -Average Length).Average; } } | # Format the results in a tabular view, automatically adjusted to # widths of the values in the columns. Format-Table -AutoSize ` @{ # Rename the Name property to something more sensible. Name = 'Extension'; Expression = { return $_.Name; } }, Count, @{ # Format the Average property to display KB instead of bytes # and use a formatting string to show it rounded to two decimals. Name = 'Average Size (KB)'; # The "1KB" is a built-in constant which is equal to 1024. Expression = { return $_.Average / 1KB }; FormatString = '{0:N2}' }

loop over a set of items that contain spaces
If you want to operate on a set of items in Bash, and at least one of them contains spaces, the `for` loop isn't going to work the way you might expect. For example, if the current dir has two files, named "file" and "file 2", this would loop 3 times (once each for "file", "file", and "2"): $ for ITEM in `ls`; do echo "$ITEM"; done Instead, use a while loop with `read`: $ ls | while read ITEM; do echo "$ITEM"; done

Browse shared folder when you're the only Linux user
Under Ubuntu smbclient is part of the samba package. With the version I use (3.0.28a) cd-ing into folders with spaces in the name is a drag. You have to put the folder name in quotes: smb: \Shared\> cd "Marketing and PR"

Generat a Random MAC address
Original author unknown (I believe off of a wifi hacking forum). Used in conjuction with ifconfig and cron.. can be handy (especially spoofing AP's)

Send youtube video to Kodi
Kodi needs the youtube plugin to be installed.

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

show rpm packages scriptlets

Using vim to save and run your python script.
This will save and execute your python script every time your press the F5 function key. It can also be added to your .vimrc: autocmd BufRead *.py nmap :w^M:!python % NOTE: the ^M is not just caret-M, it can be created by type: ctrl-v ctrl-m

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: