All commands sorted by votes

All commands (14,187)

sorted by

Localize a Public IP on a specific interface

My first command :) I made this command to log public addresses of a virtual interface who connects random VPN servers around the world. Show Sample Output
This is sample output - yours may be different.
```
date/hour/ipaddress/ip location
```
0

(date "+%d-%m-%Y %H:%M:%S";curl -s --interface lo:1 ifconfig.me| xargs -t geoiplookup 2>&1)|sed -e 's/geoiplookup/IP:/g' -e 's/GeoIP Country Edition/Country/g'|tr -s "\n" " "|sed 'a\ '

guerito · 2013-10-07 15:28:55 6
redirect STDOUT and STDERR to STDOUT and also to a file
This is sample output - yours may be different.
0

command_line 2>&1 | tee -a output_file

esplinter · 2014-04-05 13:02:30 6
My git log alias
This is sample output - yours may be different.
0

git log --graph --decorate --pretty=oneline --abbrev-commit

nicolasmccurdy · 2014-07-16 02:07:23 6
relax with philosophy while taking a dig
This is sample output - yours may be different.
0

for i in `seq 1 100`; do echo "I think therefore I am" | espeak; done

marlboro · 2014-11-08 06:30:11 10
Remove excess noise from a set of mp4 videos.

Full command: for f in input/*; do BN=$(basename "$f"); ffmpeg -i "$f" -vn "temp/$BN.flac"; sox "temp/$BN.flac" "temp/$BN-cleaned.flac" noisered profile 0.3; ffmpeg -i "$f" -vcodec copy -an "temp/$BN-na.mp4"; ffmpeg -i "temp/$BN-na.mp4" -i "temp/$BN-cleaned.flac" "output/$BN"; done This was over the 255 character limit and I didn't feel like deliberately obfuscating it. 1. Create 'input', 'output' and 'temp' directories. 2. Place the files that you want to remove the hiss/static/general noise from in the input directory. 3. Generate a noise reduction profile with sox using 'sox an_input_file.mp4 -n trim x y noiseprof profile', where x and y indicates a range in seconds that only the sound you want to eliminate is present in. 4. Run the command.
This is sample output - yours may be different.
0

for f in input/*; do BN=$(basename "$f"); ffmpeg -i "$f" -vn "temp/$BN.flac"...

samcamwilliams · 2015-03-01 02:48:19 8
count files and directories disk space usage

can be pointed at specific files using: du -ahc /path/to/file counting only directories is faster: du -hc .
This is sample output - yours may be different.
0

du -ahc

lolssl · 2015-10-01 19:38:39 10
replace color in image sequence
This is sample output - yours may be different.
0

mogrify -path ../png_white/ -fuzz 3.5% -fill white -opaque "#50566b" *.png

ceddi · 2016-10-17 20:01:00 16

Run a job in the background and prefix it's output with some string. This is particularly useful if you are running inside a docker container in a startup script (sue me, I'll run two jobs in a docker container if I want to) and you can run something like: /usr/sbin/nginx 2>&1 | awk '{print "[NGINX] " $0}' & /opt/jws-3.1/tomcat8/bin/catalina.sh run 2>&1 | awk '{print "[TOMCAT] " $0}' & while true; do ; done it can also be combined with tee to create a file log as well as a stdout log, for example if the script above where a script called "/bin/start-container.sh" then you could run /bin/start-container.sh | tee /var/log/containerlogs Show Sample Output

nginx 2>&1 | awk '{print "[NGINX] " $0}' &

hvindin · 2017-04-25 22:18:38 20

kill the first docker container in docker ps

Useful when developing and you donut usually have other docker commands running Show Sample Output
This is sample output - yours may be different.
```
 2018-05-24 15:06:10 ? |ruby-2.4.1| Jim-Park-MacBook-Pro in ~/workspace/example
±  |master ?| ? docker kill $(docker ps -q)
abc123456789
```
0

docker kill $(docker ps -q)

jim80net · 2018-05-24 22:11:06 206
find&grep all in once

calls grep on all non-binary files returned by find on its current working directory Show Sample Output
This is sample output - yours may be different.
```
./Main.java://	public static void main(String[] args) throws IOException
```
-1

#!/bin/bash find | grep -P -v "(class)|(zip)|(png)|(gz)|(gif)|(jpeg)|(jpg)" | xargs -I @ grep -H $1 @

kirdie · 2011-10-14 13:28:49 4
Terminate script or shell if not launched as root

This example code is intended to be used as a root permissions check in a script. It makes use of the $EUID (effective user ID) environment variable which is fully su- and sudo-safe.
This is sample output - yours may be different.
-1

if [[ $EUID -ne 0 ]]; then echo 'Root permissions required! Exiting.'; exit; fi

lordtoran · 2011-11-19 23:06:52 8
Spotlight Server Disabled
This is sample output - yours may be different.
-1

cd /System/Library/LaunchDaemons; sudo launchctl load -w com.apple.metadata.mds.plist

evandrix · 2012-05-16 15:42:10 4
umount --rbind mount with submounts

set CDIR for it to work right..
This is sample output - yours may be different.
-1

for i in `cat /proc/mounts | awk '{print $2}' | grep ${CDIR} |sort -r` ; do umount $i; done

mordjah · 2013-05-07 23:46:27 5
Tar - Compress by excluding folders

Tar - Compress by excluding folders Show Sample Output
This is sample output - yours may be different.
```
Tar - Compress by excluding folders
```
-1

tar -cvf /path/dir.tar /path/dir* --exclude "/path/dir/name" --exclude "/path/dir/opt"

sandeepverma · 2009-12-15 09:48:41 3
Get iPhone OS firmware URL (.ipsw)

Usage: get-ipsw device-name generation-string firmware-version For example: get-ipsw iPod 2,1 4.0 Different generation strings: iPhone 3G: iPhone 1,2 iPhone 3GS: iPhone 2,1 iPod touch 2G: iPod 2,1 iPod touch 3G: iPod 3,1 This can be used with idevicerestore (I haven't tried it though). http://github.com/posixninja/idevicerestore Based on: http://www.tuaw.com/2010/06/21/ios-4-0-firmware-release-expected-momentarily-quick-terminal-ti/ Show Sample Output
This is sample output - yours may be different.
```
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone4/061-7435.20100621.tr49t/iPod2,1_4.0_8A293_Restore.ipsw
```
-1

get-ipsw(){ curl -s -L http://phobos.apple.com/version | sed -rn "s|[\t ]*<string>(http://appldnld\.apple\.com\.edgesuite\.net/content\.info\.apple\.com/iPhone[0-9]?/[^/]*/$1$2_$3_[A-Z0-9a-z]*_Restore\.ipsw)</string>|\1|p" | uniq; }

matthewbauer · 2010-06-22 02:34:15 5

Get a file's type and metadata

Some shell newbies don't know this very handy file management related command so I decided to include it here. You need to have the "file" package installed. Show Sample Output

-1

file <filename>

lordtoran · 2011-11-19 23:39:29 3

list each file/directory size in a directory
This is sample output - yours may be different.
-1

ls | xargs -I{} du -sh {}

kenshin54 · 2013-07-28 04:18:25 8
Push current task to background (paused) and resume it.

Saves opening another console terminal (eg. CTRL+ALT+F[n]) or opening another remote terminal. Ctrl+Z pauses the current task and pushed it to the background, leaving you with a command prompt for those "Oh crap I forgot to change xyz before I ran that and it'll take forever if I Ctrl+C and start again..." situations. Typing 'fg' (shorthand for foreground, that's how I remember it) will resume the paused task. Show Sample Output
This is sample output - yours may be different.
```
$ dd if=/dev/zero of=test.file
^Z
[1]+  Stopped                 dd if=/dev/zero of=test.file
$ echo "I needed to do this."
I needed to do this.
$ fg
dd if=/dev/zero of=test.file
```
-1

<CTRL+Z>; fg

kbrotheridge · 2014-04-06 14:21:08 7
Use ping to test if a server is up

Bash scrip to test if a server is up, you can use this before wget'ing a file to make sure a blank one isn't downloaded.
This is sample output - yours may be different.
-1

if [ "$(ping -q -c1 google.com)" ];then wget -mnd -q http://www.google.com/intl/en_ALL/images/logo.gif ;fi

alf · 2010-03-23 04:15:03 10
Convert wma to wav
This is sample output - yours may be different.
-1

for i in *.wma; do mplayer -vo null -vc dummy -af resample=44100 -ao pcm:waveheader:file="${i%.wma}.wav" "$i" ; done

schef · 2011-01-18 14:41:17 3
Show seconds since modified of newest modified file in directory
This is sample output - yours may be different.
-1

echo $(( $( date +%s ) - $( stat -c %Y * | sort -nr | head -n 1 ) ))

depesz · 2011-05-12 14:29:45 3
lsof - cleaned up for just open listening ports, the process, and the owner of the process
This is sample output - yours may be different.
-1

alias oports="echo -e "User:\tCommand:\tPort:\n----------------------------" && lsof -i 4 -P -n | awk '/LISTEN/ {print $3, $1, $9}' | sed 's/ [a-z0-9\.\*]*:/ /' | sort -u -k 3 -n | xargs printf '%-10s %-10s %-10s\n'"

rthemocap · 2011-08-04 16:39:04 4
Get video information with ffmpeg

mp4box is great when working with mp4s
This is sample output - yours may be different.
-1

mp4box -info video.mp4

alienresident · 2013-01-18 14:43:29 5
Binary digits Matrix effect
This is sample output - yours may be different.
-1

perl -e 'use Term::ANSIColor;$|++; while (1) { print color("green")," " x (rand(35) + 1), int(rand(2)), color("reset") }'

mvrpl · 2017-04-26 14:05:48 20
bash function to check for something every 5 seconds

Every seconds do Show Sample Output
This is sample output - yours may be different.
```
Every 10,0s: ls /tmp                           Fri Sep  4 19:19:11 2009
...
<list of files>
```
-1

watch -n <seconds> <command>

aonick · 2009-09-04 15:19:42 3
‹ First < 463 464 465 466 467 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

lazy SQL QUERYING

alias for psql command line; works similar for Oracles sqlplus commandline interface. if you do not provide stdin you will end up in the db shell.

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

Sort file greater than a specified size in human readeable format including their path and typed by color, running from current directory

1. find file greater than 10 MB 2. direct it to xargs 3. xargs pass them as argument to ls

Display all shell functions set in the current shell environment

Uses the shell builtin `declare` with the '-f' flag to output only functions to grep out only the function names. You can use it as an alias or function like so: alias shfunctions="builtin declare -f | command grep --color=never -E '^[a-zA-Z_]+\ '" shfunctions () { builtin declare -f | command grep --color=never -E '^[a-zA-Z_]+\ '; }

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

find files in a date range

Find files in a specific date range - in this case, the first half of last year. -newermt = modification time of the file is more recent than this date GNU find allows any date specfication that GNU date would accept, e.g. $ find . -type f -newermt "3 years ago" ! -newermt "2 years ago" or $ find . -type f -newermt "last monday"

Change your swappiness Ratio under linux

This command allow you to set the swappiness var at 50 (default is 60). The value interval must be set between 0 and 100. If swappiness is high=Swap usage is high, if swappiness is low=Ram usage is high.

Find the package that installed a command

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by