This will output the characters at 10 per second.
pv allows a user to see the progress of data through a pipeline, by giving information such as time elapsed, percentage completed (with progress bar), current throughput rate, total data transferred, and ETA. (man pv) Show Sample Output
Pipe viewer is a terminal-based tool for monitoring the progress of data through a pipeline. It can be inserted into any normal pipeline between two processes to give a visual indication of how quickly data is passing through, how long it has taken, how near to completion it is, and an estimate of how long it will be until completion. Source: http://www.catonmat.net/blog/unix-utilities-pipe-viewer/ Show Sample Output
connects to host via ssh and displays the live transfer speed, directing all transferred data to /dev/null needs pv installed Debian: 'apt-get install pv' Fedora: 'yum install pv' (may need the 'extras' repository enabled) Show Sample Output
What happens here is we tell tar to create "-c" an archive of all files in current dir "." (recursively) and output the data to stdout "-f -". Next we specify the size "-s" to pv of all files in current dir. The "du -sb . | awk ?{print $1}?" returns number of bytes in current dir, and it gets fed as "-s" parameter to pv. Next we gzip the whole content and output the result to out.tgz file. This way "pv" knows how much data is still left to be processed and shows us that it will take yet another 4 mins 49 secs to finish. Credit: Peteris Krumins http://www.catonmat.net/blog/unix-utilities-pipe-viewer/ Show Sample Output
This command utilizes 'pv' to show dd's progress. Notes on use with dd: -- dd block size (bs=...) is a widely debated command-line switch and should usually be between 1024 and 4096. You won't see much performance improvements beyond 4096, but regardless of the block size, dd will transfer every bit of data. -- pv's switch, '-s' should be as close to the size of the data source as possible. -- dd's out file, 'of=...' can be anything as the data within that file are the same regardless of the filename / extension. Show Sample Output
The command copies a file from remote SSH host on port 8322 with bandwidth limit 100KB/sec; --progress shows a progress bar --partial turns partial download on; thus, you can resume the process if something goes wrong --bwlimit limits bandwidth by specified KB/sec --ipv4 selects IPv4 as preferred I find it useful to create the following alias: alias myscp='rsync --progress --partial --rsh="ssh -p 8322" --bwlimit=100 --ipv4' in ~/.bash_aliases, ~/.bash_profile, ~/.bash_login or ~/.bashrc where appropriate. Show Sample Output
connects to host via ssh and displays the live transfer speed, directing all transferred data to /dev/null needs pv installed Debian: 'apt-get install pv' Fedora: 'yum install pv' (may need the 'extras' repository enabled) Show Sample Output
This version was mentioned in the comments. Credits go to flatcap.
Displays the realtime line output rate of a logfile. -l tels pv to count lines -i to refresh every 10 seconds -l option is not in old versions of pv. If the remote system has an old pv version: ssh tail -f /var/log/apache2/access.log | pv -l -i10 -r >/dev/null
[re]verify those burned CD's early and often - better safe than sorry - at a bare minimum you need the good old `dd` and `md5sum` commands, but why not throw in a super "user-friendly" progress gauge with the `pv` command - adjust the ``-s'' "size" argument to your needs - 700 MB in this case, and capture that checksum in a "test.md5" file with `tee` - just in-case for near-future reference. *uber-bonus* ability - positively identify those unlabeled mystery discs - for extra credit, what disc was used for this sample output? Show Sample Output
Real gurus don't need fancy tools like iftop or jnettop. Show Sample Output
need pv (pipe view) : http://www.ivarch.com/programs/pv.shtml Show Sample Output
piping through 'pv' shows a simple progress/speed bar for dd. This is a replacement for my otherwise favorite 'while :;do killall -USR1 dd;sleep 1;done' Show Sample Output
Create an image of "device" and send it to another machine through the network ("target" and "port" sets the ip and port the stream will be sent to), outputting a progress bar
On the machine that will receive, compress and store the file, use:
nc -l -p <port> | 7z a <filename> -si -m0=lzma2 -mx=9 -ms=on
Optionally, add the -v4g switch at the end of the line in order to split the file every 4 gigabytes (or set another size: accepted suffixes are k, m and g).
The file will be compressed using 7z format, lzma2 algorithm, with maximum compression level and solid file activated.
The compression stage will be executed on the machine which will store the image. It was planned this way because the processor on that machine was faster, and being on a gigabit network, transfering the uncompressed image wasn't much of a problem.
This example will close the pipe after transferring 100MB at a speed of 3MB per second.
Print out the progress of MySQL import using the pv command. Updates every second. Show Sample Output
Pipe Viewer allows you to monitor the progress of a data transfer or command, or to show the time elapsed, among other things. In this use, it limits the transfer rate of the echo command to 10 bytes per second, making your text appear to be typed out in real time as in Hollywood movies. Fun!
It really disables all ICMP responses not only the ping one.
If you want to enable it you can use:
sudo -s "echo 0 > /proc/sys/net/ipv4/icmp_echo_ignore_all"
This will show the throughput between two nodes. Thanks to szboardstretcher, who posted it here: http://www.linuxquestions.org/questions/linux-networking-3/quick-and-easy-way-to-measure-throughput-between-two-nodes-868998/
commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.
Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.
» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10
Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):
Subscribe to the feed for: