Commands using echo sorted by votes

Commands using echo (1,545)

sorted by

quick and easy way of validating a date format of yyyy-mm-dd and returning a boolean

Quick and easy way of validating a date format of yyyy-mm-dd and returning a boolean, the regex can easily be upgraded to handle "in betweens" for mm dd or to validate other types of strings, ex. ip address. Boolean output could easily be piped into a condition for a more complete one-liner.
This is sample output - yours may be different.
-1

echo 2006-10-10 | grep -c '^[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]$'

rez0r · 2009-05-11 22:18:43 7
Organize a TV-Series season

It happened to me that I got a season of a tv-show which had all files under the same folder like /home/blah/tv_show/season1/file{1,2,3,4,5,...}.avi But I like to have them like this: /home/blah/tv_show/season1/e{1,2,3,4,5,...}/file{1,2,3,4,5,...}.avi So I can have both the srt and the avi on one folder without cluttering much. This command organizes everything assuming that the filename contains Exx where xx is the number of the episode. You may need to set: IFS=$'\n' if your filenames have spaces.
This is sample output - yours may be different.
-1

season=1; for file in $(ls) ; do dir=$(echo $file | sed 's/.*S0$season$E[0-9]\{2\}$.*/\1/'); mkdir $dir ; mv $file $dir; done

lonecat · 2009-05-27 03:30:58 4
Sort a list of numbers on on line, separated by spaces.

You can replace "sort -nu" with "sort -u" for a word list sorted or "sort -R" for a random-sorted line (edit: corrected) Show Sample Output
This is sample output - yours may be different.
```
$ echo "4 2  3 5  2 52  11" | sed "s/$ \|$$/\n/g" | sort -nu | tr "\n" " "| sed -e "s/^ *//" -e "s/ $//"
2 3 4 5 11 52
```
-1

echo $numbers | sed "s/$ \|$$/\n/g" | sort -nu | tr "\n" " " | sed -e "s/^ *//" -e "s/ $//"

chickenzilla · 2009-06-24 15:12:17 7
dig this
This is sample output - yours may be different.
-1

for dnsREC in $(curl -s http://www.iana.org/assignments/dns-parameters |grep -Eo ^[A-Z\.]+\ |sed 's/TYPE//'); do echo -n "$dnsREC " && dig +short $dnsREC IANA.ORG; done

commandlinefu · 2009-09-01 03:11:18 3
Sort a character string

using awk missed the last char thanks @Josay Show Sample Output
This is sample output - yours may be different.
```
aeeelmoprsst
```
-1

echo sortmeplease | awk '{l=split($1,a,"");asort(a);while(x<=l){printf "%s",a[x];x++ }print "";}'

foob4r · 2009-09-03 10:22:39 4
Capitalize the word with dd
This is sample output - yours may be different.
-1

echo capitalize | { dd bs=1 count=1 conv=ucase 2> /dev/null; cat ;}

twfcc · 2009-09-05 01:49:53 40
search for a file in PATH

search argument in PATH accept grep expressions without args, list all binaries found in PATH Show Sample Output
This is sample output - yours may be different.
```
$ sepath noo
/usr/openwin/bin/ttsnoop
/usr/sbin/snoop
$ sepath ^ps$
/bin/ps
/usr/bin/ps
/usr/ucb/ps
```
-1

function sepath { echo $PATH |tr ":" "\n" |sort -u |while read L ; do cd "$L" 2>/dev/null && find . $ ! -name . -prune $ $ -type f -o -type l $ 2>/dev/null |sed "s@^\./@@" |egrep -i "${*}" |sed "s@^@$L/@" ; done ; }

mobidyc · 2009-09-11 15:03:22 5
search for a file in PATH

Searches in order of the directories of $PATH. Stops after finding the entry; looks for only that fileName. Works in Bourne, Korn, Bash and Z shells. Show Sample Output
This is sample output - yours may be different.
```
/usr/local/bin/fileName
```
-1

for L in `echo :$PATH | tr : '\n'`; do F=${L:-"."}/fileName; if [ -f ${F} -o -h ${F} ]; then echo ${F}; break; fi; done

arcege · 2009-09-11 16:14:36 3
regex to match an ip

Handles everything except octets with 255. Ran through ip generator with variable octet lengths.
This is sample output - yours may be different.
-1

echo 127.0.0.1 | egrep -e '^(([01]?[0-9]{1,2}|2[0-4][0-9]|25[0-4])\.){3}([01]?[0-9]{1,2}|2[0-4][0-9]|25[0-4])$'

arcege · 2009-09-17 17:40:48 3
for loop with leading zero in bash 3

Bash 4 will let you do {00..19} to get leading zeros, but Bash 3 doesn't have that feature. This technique gets you partway there (the sequences need be such that the last digit ranges from zero to nine - you can't use this for something like Bash 4's {03..27}, for example). When this limitation is not a problem, you can avoid some complicated string manipulation for concatenating leading zeros. You can add more digits like this: {0..1}{0..9}{0..9} (ranges from 0 to 99 with up to two leading zeros). To pad with additional zeros: for i in 000{0..1}{0..9}; do echo $i; done or for i in {0..1}{0..9}; do echo "000$i"; done This is useful for creating values to sort or for creating filenames with a fixed format. Note that this will also work: touch {0..1}{0..9} Show Sample Output
This is sample output - yours may be different.
```
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
```
-1

for i in {0..1}{0..9}; do echo $i; done

dennisw · 2009-09-18 02:51:12 5
Check if variable is a number
This is sample output - yours may be different.
-1

echo $X | egrep "^[0-9]+$"

sharfah · 2009-10-09 13:59:47 6
Email if you disk is over 90%

Email if you disk is over 90% - www.fir3net.com
This is sample output - yours may be different.
-1

HDD=$(df | awk ' NR>3 (S=$5) (M=$6) { if (S>90) print "Your Systems "M" is """S" Full" } ') ; [[ $HDD ]] && echo "$HDD" | mail -s "Hard-Drives Full" TO@EMAIL.com -- -f FROM@EMAIL.com >/dev/null

felix001 · 2009-10-16 06:52:36 5
Partition a new disk as all one partition tagged as "LInux LVM"

This is a bit hacky, but if you're setting up a bunch of new LUNs, it can save a bunch of time. Also check out sfdisk. The fdisk will fail if, for example, a partition table already exists.
This is sample output - yours may be different.
-1

echo -e "n\np\n1\n\n\nt\n8e\nw" | fdisk /dev/sdX

sud0er · 2009-10-20 16:21:54 5
password generator

make password randomly, default 8 char
This is sample output - yours may be different.
-1

genpass() { local h x y;h=${1:-8};x=( {a..z} {A..Z} {0..9} );y=$(echo ${x[@]} | tr ' ' '\n' | shuf -n$h | xargs);echo -e "${y// /}"; }

twfcc · 2009-10-24 04:05:42 4
Friendly command-not-found message.

This will give you a friendly warning if a command doesn't exists. Show Sample Output
This is sample output - yours may be different.
```
$ aptitypo
...
```
-1

command_not_found_handle() { echo 6661696c626f61742e2e2e0a | xxd -p -r; }

unixmonkey7301 · 2009-12-03 21:33:35 4
Know when you will type :q in your term instead of vi(m), the alias will chewed you out.

For vi(m) users : Add it in your ~/.bashrc Add an "exit" @ the end if you are masochist ;) Show Sample Output
This is sample output - yours may be different.
```
this is NOT vi(m) :/
```
-1

alias :q='tput setaf 1; echo >&2 "this is NOT vi(m) :/"; tput sgr0'

sputnick · 2009-12-08 12:59:44 3
prints line numbers

Yep, is hard, but is a way more flexible using pipe.
This is sample output - yours may be different.
-1

cat infile | while read str; do echo "$((++i)) - $str" ; done;

glaudiston · 2009-12-09 14:05:09 3
prints line numbers

Hi glaudiston, you can save a few chars by leaving out cat and pipe and still enjoy the added flexibility.
This is sample output - yours may be different.
-1

while read str; do echo "$((++i)) - $str"; done < infile

putnamhill · 2009-12-09 15:11:25 3
[Gentoo] Input modules, commented, in your module.autoload file

Whenever you compile a new kernel, there are always new modules. The best way to make sure you have the correct modules loaded when you boot is to add all your modules in the modules.autoload file (they will be commented) and uncomment all those modules you need. Also a good way to keep track of the available modules in your system. For other distros you may have to change the name of the file to /etc/modprobe.conf Show Sample Output
This is sample output - yours may be different.
```
# /etc/modules.autoload.d/kernel-2.6:  kernel modules to load when system boots.
#
# Note that this file is for 2.6 kernels.
#
# Add the names of modules that you'd like to load when the system
# starts into this file, one per line.  Comments begin with # and
# are ignored.  Read man modules.autoload for additional details.

# For example:
# aic7xxx
# mixer-oss.ko
# pcm-oss.ko
# seq-device.ko
# seq-oss.ko
# snd-seq.ko
```
-1

find /lib/modules/`uname -r`/ -type f -iname '*.o' -or -iname '*.ko' |grep -i -o '[a-z0-9]*[-|_]*[0-9a-z]*\.ko$' |xargs -I {} echo '# {}' >>/etc/modules.autoload.d/kernel-2.6

paragao · 2010-01-13 02:12:08 4
displays a reminder message at the specified time
This is sample output - yours may be different.
-1

echo "DISPLAY=$DISPLAY xmessage convert db to innodb" | at 00:00

op4 · 2010-02-04 04:02:35 4
Send web page by e-mail

This will send the web page at $u to recipient@example.com . To send the web page to oneself, recipient@example.com can be replaced by $(whoami) or $USER. The "charset" is UTF-8 here, but any alternative charset of your choice would work. `wget -O - -o /dev/null $u` may be considered instead of `curl $u` . On some systems the complete path to sendmail may be necessary, for instance /sys/pkg/libexec/sendmail/sendmail for some NetBSD.
This is sample output - yours may be different.
-1

{ u="http://twitter.com/commandlinefu"; echo "Subject: $u"; echo "Mime-Version: 1.0"; echo -e "Content-Type: text/html; charset=utf-8\n\n"; curl $u ; } | sendmail $USER

pascalvaucheret · 2010-02-24 04:18:30 5
x bottles of beer on the wall graph

Will create a graph of the results for "x bottles of beer on the wall". Requires Gnuplot. Inspired by an xkcd comic: http://xkcd.com/715/ For sample output see: http://tr.im/xbottlesofbeer Show Sample Output
This is sample output - yours may be different.
```
See http://tr.im/xbottlesofbeer
```
-1

(echo "plot '-' with lines"; for x in $(seq 1 100); do curl -s "http://ajax.googleapis.com/ajax/services/search/web?v=1.0&q=$(echo $x bottles of beer on the wall|sed 's/ /%20/g')"|sed 's/.*"estimatedResultCount":"$[^"]*$".*/\1\n/';done)|gnuplot -persist

matthewbauer · 2010-03-17 21:04:36 4
Split a file into equal size chunks and archive to (e)mail account.

This is just a little snippit to split a large file into smaller chunks (4mb in this example) and then send the chunks off to (e)mail for archival using mutt. I usually encrypt the file before splitting it using openssl: openssl des3 -salt -k <password> -in file.tgz -out file.tgz.des3 To restore, simply save attachments and rejoin them using: cat file.tgz.* > output_name.tgz and if encrypted, decrypt using: openssl des3 -d -salt -k <password> -in file.tgz.des3 -out file.tgz edit: (changed "g" to "e" for political correctness)
This is sample output - yours may be different.
-1

split -b4m file.tgz file.tgz. ; for i in file.tgz.*; do SUBJ="Backup Archive"; MSG="Archive File Attached"; echo $MSG | mutt -a $i -s $SUBJ YourEmail@(E)mail.com

tboulay · 2010-03-20 16:49:19 8
Leap year calculation
This is sample output - yours may be different.
-1

year=2010; math=`echo "$year%4" | bc`; [ ! -z $year ] && [ $math -eq 0 ] && echo "$year is leap year!" || echo "$year isn't leap year";

mvrilo · 2010-03-30 15:33:00 4
Bash function to see if the day ends in

The shell has perfectly adequate pattern matching for simple expressions. Show Sample Output
This is sample output - yours may be different.
```
ok
```
-1

function ends_in_y() { case $(date +%A) in *y ) true ;; * ) false ;; esac } ; ends_in_y && echo ok

unixmonkey9199 · 2010-04-06 22:18:52 3
‹ First < 50 51 52 53 54 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Using ASCII Art output on MPlayer

Not so useful. Just a cool feature.

recursively change file name from uppercase to lowercase (or viceversa)

Example of zsh globing, glob qualifier, and substitution: -Q state that the parameter will contain a glob qualifier. (**/)(*) is recursive (.) is our glob qualifier, with states the match is a file "." The first parameter $1, is then substituted with $2 but with lowercasing '(L)' ... a (U) would of course be from lower to upper.

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Multi-segment file downloading with lftp

This is for files only, for directories 'mirror' has to be used.

Binary clock

ssh autocomplete

Autocomplete from .ssh/config

lotto generator

Donwload media from *.rm from an url of type htttp://.../*.ram

find files containing text

-l outputs only the file names -i ignores the case -r descends into subdirectories

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using echo

Commands using echo (1,545) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using echo (1,545)

sorted by