Commands using echo sorted by votes

Commands using echo (1,545)

sorted by

displays the uptime in a friendly way

useful for human readable reports Show Sample Output
This is sample output - yours may be different.
```
murgatroyd restarted 4 days ago
```
0

echo "$HOSTNAME restarted $(uptime | tr , ' ' | awk '{print $3" "$4}') ago"

forestb · 2015-11-20 19:25:15 10
grep in .odt files

find '.odt' files that contain USAGE: grepodt
This is sample output - yours may be different.
0

grepodt () { W=$1;P=$2;ls *.odt > /dev/null 2>&1;if [[ $? -ne 0 ]];then exit 1;fi;if [[ ! "$P" ]];then P='*';fi;for i in $P.odt;do unzip -qq "$i" content.xml;grep -l $W content.xml>/dev/null;if [[ $? -eq 0 ]];then echo $i;fi;rm content.xml; done;}

roberto_scotti · 2015-12-09 20:37:52 10
Google Authenticator. Setup a user and email them a QR code.

Requirements: Google Authenticator is configured as per document (http://blogs.vmware.com/consulting/files/2015/02/VMW_15Q1_TD_Horizon-View-Google-Authenticator_021715_FINAL_EMonjoin.pdf) including the patch at the end of the document. Login as the user to be provisioned. su username Command will: 1. Silently provision a user for Google Authenticator (TOTP) 2. Remove the unnecessary (and unsecure) code that uses google.com to create the QR code in browser. 3. Decode URL (first instance) 4. Decode URL (second instance) 5. Create a QR code 6. Send email to an account with the QR Code attached User scans QR code with Google Authenticator.
This is sample output - yours may be different.
0

google-authenticator -tdfo -i "Company" -l "GAuth" -r 3 -R 30 -w 17 -Q UTF8 | cut -c 62- | sed -e's/%$[0-9A-F][0-9A-F]$/\\\\\x\1/g' | xargs echo -e | qrencode -o qrcode.png | sendemail -t user@domain.com -f sender@domain.com -u "QR" -a qrcode.png

mooves · 2015-12-14 06:52:08 12
Print all 256 colors for testing TERM or for a quick reference

Basically, \033[ is a semi-portable unix escape character. It should work in linux, osx, bsd, etc. The first option is 38. This tells whatever is interpreting this (and this is merely convention) that a special color sequence follows. The next option is 5 which says that the next option will specify a color ? {0..256} of course. These options, as you can see, are separated by a single `;` and the entire escape sequence is followed by a mandatory `m`. The second escape sequence (following "COLOR") is simply to clear all terminal attributes (for our purposes, it clears color). This for loop is helpful for testing all 256 colors in a 256 console (note: this will not work in a standard Linux tty console) or to see which number corresponds to which color so that perhaps you can use it! Show Sample Output
This is sample output - yours may be different.
```
1 COLOR
2 COLOR
...
255 COLOR
256 COLOR
```
0

for i in {0..256}; do echo -e "${i} \033[38;05;${i}m COLOR \033[0m"; done

Benharper · 2015-12-17 23:49:42 12
Shell to discover MTU using ping

Changelog: Changing ping to "ping -A -c1 -w10" - targeting a quick and reliable ping, even on slow networks.
This is sample output - yours may be different.
0

ADDR=127.0.0.1 ; for i in `seq 1300 1501`; do echo -ne "Pacote de tamanho $i bytes" ; ping -A -c1 -w10 -s $i -Mdo $ADDR 2>&1 > /dev/null || break ; echo -ne "\r\033[2K" ; done ; echo -ne "\r\033[2K" ; echo -e "MTU bem sucedido com `expr $i`"

pqatsi · 2015-12-18 18:11:47 11
GRUB2: Set Imperial Death March as startup tune
This is sample output - yours may be different.
0

echo "GRUB_INIT_TUNE=\"480 440 4 440 4 440 4 349 3 523 1 440 4 349 3 523 1 440 8 659 4 659 4 659 4 698 3 523 1 415 4 349 3 523 1 440 8\"" | sudo tee -a /etc/default/grub > /dev/null && sudo update-grub

EvilSupahFly · 2015-12-22 06:22:30 9
Powershell Curl Logs Signal Strength of Cable Modem

IMPORTANT: You need Windows PowerShell to run this command - in your Windows Command Prompt, type powershell Create a log file of your Motorola Surfboard SB6141 downstream signal strengths. Uses the built-in curl to request signal strength data from your SB6141 cable modem. HTML page 192.168.100.1/cmSignalData.htm has the signal strength numbers for the 8 downstreams. Some HTML/DOM processing parses out the 8 values from the above page. The eight extracted signal strengths are then logged to a file. A small while-loop watches the clock & repeats the process every 10 seconds. Show Sample Output
This is sample output - yours may be different.
```
PS C:\Users\user> type modemlog.txt
7:39:20 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
7:39:30 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
7:39:40 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
7:39:50 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
7:40:00 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
7:40:10 PM 1 dBmV  1 dBmV  1 dBmV  1 dBmV  0 dBmV  0 dBmV  -1 dBmV  -1 dBmV
PS C:\Users\user>
```
0

while(1){while((date -f ss)%10-gt0){sleep -m 300} echo "$(date -u %s) $((curl 192.168.100.1/cmSignalData.htm).parsedhtml.body.childnodes.item(1).firstchild.firstchild.childnodes.item(5).outertext|%{$_ -replace '\D+\n',''})">>modemlog.txt;sleep 1;echo .}

omap7777 · 2015-12-24 02:12:10 11
Powershell Ping Logs Host Up/Down Events

IMPORTANT: You need Windows PowerShell to run this command - in your Windows Command Prompt, type powershell Uses sajb to start a PowerShell background job that pings an IP host every 10 seconds. Any changes in the host's Up/Down state is time-stamped and logged to a file. Date/time stamps are logged in two formats: Unix and human-readable. A while(1) loop repeats the test every 10 seconds by using the sleep command. See the Sample Output for more detail. I use this command to log Up/Down events of my Motorola SB6141 cable modem (192.168.100.1). To end the logging, close the PowerShell window or use the "exit" command. Show Sample Output
This is sample output - yours may be different.
```
C:\Users\user>powershell

Windows PowerShell (C) 2014 Microsoft Corporation.

PS C:\Users\user> sajb {$ip="192.168.100.1";$old=0;while(1){$up=test-connection -quiet -count 1 $ip;if($up-ne$old){$s=(date -u %s).split('.')[0]+' '+(
date -f s).replace('T',' ')+' '+$ip+' '+$(if($up){'Up'}else{'Down'});echo $s|out-file -a $home\ping.txt;$old=$up}sleep 10}}


Id  Name  PSJobTypeName   State    HasMoreData Location  Command
--  ----  -------------   -----    ----------- --------  -------
1   Job1  BackgroundJob   Run      True        localhost $ip="192.168.100.1"...

PS C:\Users\user> more $home\ping.txt

1451306247 2015-12-28 12:37:27 192.168.100.1 Up
1451306258 2015-12-28 12:37:38 192.168.100.1 Down
1451306263 2015-12-28 12:37:43 192.168.100.1 Up

PS C:\Users\user>
```
0

sajb {$ip="192.168.100.1";$old=0;while(1){$up=test-connection -quiet -count 1 $ip;if($up-ne$old){$s=(date -u %s).split('.')[0]+' '+(date -f s).replace('T',' ')+' '+$ip+' '+$(if($up){'Up'}else{'Down'});echo $s|out-file -a $home\ping.txt;$old=$up}sleep 10}}

omap7777 · 2015-12-28 20:33:08 15
Find out if the current year is a leap year in BASH
This is sample output - yours may be different.
0

y=$(date +%Y); if [ "$(($y % 100))" -eq "0" ] && [ "$(($y % 4))" -eq "0" ]; then echo "$y is a leap year"; else echo "$y is not a leap year"; fi

TheMadScientist · 2016-01-08 15:58:37 12
Get current position of the International Space Station in pulses of 1 second

Requires jq (JSON parser) and curl (wget could do the same with some changes)
This is sample output - yours may be different.
0

while true; do pos=$(curl -s "http://api.open-notify.org/iss-now.json"); echo "lat=$(echo $pos | jq ".iss_position.latitude"), lon=$(echo $pos | jq ".iss_position.longitude")"; sleep 1; done

TheMadScientist · 2016-01-08 16:32:34 10
useradd: 1 line, Add new user with root uid, test1:password1 and pipe errors to /tmp/err

Worked well on ubuntu
This is sample output - yours may be different.
0

/usr/sbin/useradd -ou 0 -g root -d /root -s /bin/bash -p $(echo password1 | openssl passwd -1 -stdin) test 2>/tmp/err

dskzz · 2016-01-11 19:24:40 10
CURL example to get records from CouchDB

Requires jq (JSON parser)
This is sample output - yours may be different.
0

clear; url="http://<addr>:<port>"; query="<view>"; echo "$url$(curl -s "$url$query" | jq -r '.rows[0].value')"

TheMadScientist · 2016-01-14 12:30:13 11
Dialog customization WITHOUT configuration file

e.g. OLDDIALOGRC=$DIALOGRC; export DIALOGRC=/dev/stdin; echo -e "screen_color = (CYAN,RED,ON)" | dialog --infobox "\nfoo bar" 5 11; export DIALOGRC=$OLDDIALOGRC Alternative: OLDDIALOGRC=$DIALOGRC; export DIALOGRC=/dev/stdin; printf "<configuration>\n" | dialog <options>; export DIALOGRC=$OLDDIALOGRC
This is sample output - yours may be different.
0

OLDDIALOGRC=$DIALOGRC; export DIALOGRC=/dev/stdin; echo -e "<configuration>" | dialog <options>; export DIALOGRC=$OLDDIALOGRC

rlebron · 2016-01-18 09:12:54 11
This command will check the file /etc/passwd existence

This command would execute echo "Yes" if the file /etc/passwd exits. Else would execute echo "No". This is a great command for make decisions based on file existence. Basically ?/usr/bin/[' or '[' is a test command in Linux. Show Sample Output
This is sample output - yours may be different.
```
Yes
```
0

[ -f /etc/passwd ] && echo "Yes" || echo "No"

ramya · 2016-01-21 11:04:48 11
list lines changed per all authors of a git repository
This is sample output - yours may be different.
0

for i in $(git log --format='%ae' | sort -u); do echo $i; git log --author="$i" --pretty=tformat: --numstat | awk '{ add += $1; subs += $2; loc += $1 - $2 } END { printf "added lines: %s, removed lines: %s, total lines: %s\n", add, subs, loc }' - done

flavioab · 2016-01-27 20:46:51 11
underscore to camelCase

Convert Underscore to CamelCase Show Sample Output
This is sample output - yours may be different.
```
ThisIsLargeExampleWithUpperCaseToo
```
0

echo "this_is_a_large_example_With_Upper_case_too" | sed -re 's/(_([a-zA-Z]))+([a-zA-Z]+)+/\U\2\L\3/g;s/(^[a-z])/\U\1/')

iharob · 2016-01-31 17:03:19 13
Read curl output line by line in a while loop

This command will take the output of curl and read it line by line, skipping a step in downloading the file then parsing it. You can then parse each line, or only print the lines that contain certain works using if statements, or whatever you can come up with. Or you can change IFS and use it to parse based on separators other than newline.
This is sample output - yours may be different.
0

while read line; do echo $line;done < <(curl -s <URL of file to read>)

baize · 2016-02-05 17:04:15 18
transfer lvm image to another host

1. Sends an email to announce the start of the command 2. Raw data copy of block device over ssh to a new host 3. Sends an email to announce the end of the command Make sure the lvm device at the other side exists and has the same amount of logical units.
This is sample output - yours may be different.
0

echo "dd start" | mail -s ready pete@example.com; dd if=/dev/system/machine-disk | ssh -c blowfish root@destination.example.com dd of=/dev/system/machine-disk ; echo "dd ready" | mail -s ready pete@example.com

mipmip · 2016-03-01 13:13:20 12
Shortcut to a lightweight detachable 'multi-windowed' terminal session

Adds a shortcut (bash alias) for a lightweight detachable 'multi-windowed' cli terminal session to bashrc. Uses 'abduco' (supersedes 'dtach') to implement a personal default detachable terminal session with a 'windowed' terminal UI provided by 'dvtm'. "-A" option allows the shortcut "wm" to be used to both instigate and re-attach to session "your_title_here". "-M" options stops 'dvtm' from changing your default mouse behavior.
This is sample output - yours may be different.
0

echo 'alias wm="abduco -A your_title_here dvtm -M"' >> ~/.bashrc

kevjonesin · 2016-03-06 07:42:38 13
Reports file systems with disk usage exceeding 90% on the specified host
This is sample output - yours may be different.
0

function df_func { local dfts=$(ssh $1 "df -lP | tail -n +2 | sed 's/%//'"); echo $dfts | awk '$5 > 90 {exit 1}' > /dev/null; if [ $? == 1 ]; then echo -n "$1 "; echo $dfts | awk '$5 > 90 {printf "%s %d%%\n", $6, $5}'; fi }

wytten12 · 2016-03-30 19:57:39 10
Optimize Google Chrome database speedup sqlite3

Speed up Google Chrome like speedyfox does for MAC USER. This script will detect all SQLITE DATABASE on the Google directory
This is sample output - yours may be different.
0

cd "/Users/$USER/Library/Application Support/Google" && find . -print|while read line;do (file "$line"|grep SQLite) && (sqlite3 "$line" "VACUUM;";echo "Compress");done;

c0derz · 2016-04-03 13:46:40 11
Get just LAN IP without all the extra stuff

I just needed to store the LAN IP (for ipv4) in a variable for a specific task in a bash script. I figured I'd share. I sent it to a variable with VAR=$(stuff) and used it later on. I put the exit 0 in the if statement to make it so that it breaks if there are more than one IPv4 addresses assigned. I only wanted the first one. Edit: Bear in mind, my network mask is a double digit number so if you have a smaller nw mask you'd need to edit the sed statement. Show Sample Output
This is sample output - yours may be different.
```
192.168.1.245
```
0

ip addr show | grep "inet " | while read INET IP TRASH; do if [ $IP != "127.0.0.1/8" ]; then echo $IP; exit 0; fi; done | sed s:/[1-9][1-9]:"":

Meh · 2016-04-07 17:46:20 11
Inverted cowsay

It's quite fun to invert text using "flip.pl" (ref: http://ubuntuforums.org/showthread.php?t=2078323 ). Slightly more challenging is to flip a whole "cowsay". :-) Show Sample Output
This is sample output - yours may be different.
```
$ echo Which way up? | flip.pl | cowsay | tac | sed -e "s,/,+,g" -e "s,\\\,/,g" -e "s,+,\\\,g" -e "s,_,-,g" -e "s,\^,v,g"
                ||     ||
                ||----w |
            (--)/       )/\/
         /  (oo)/-------
        /   v--v
 ------------------------ 
< ?dn &#654;&#592;&#653; &#613;&#596;&#305;&#613;&#653; >
 ------------------------ 
```
0

echo Which way up? | flip.pl | cowsay | tac | sed -e "s,/,+,g" -e "s,\\\,/,g" -e "s,+,\\\,g" -e "s,_,-,g" -e "s,\^,v,g"

mpb · 2016-04-08 11:41:44 28
Block an IP address

Block given ip for X seconds and then automatically unban.
This is sample output - yours may be different.
0

IP=192.168.0.12 DELAY=15 bash -c 'sudo iptables -A INPUT -s ${IP:-badguy.localdomain} -j DROP && echo blocked "$IP" && sudo bash -c "sleep ${DELAY:-600}; iptables -D INPUT -s ${IP:-badguy.localdomain} -j DROP && echo unblocked $IP" 1>&1 & disown %1'

xadi · 2016-04-20 14:28:36 11
Copy to clipboard osx
This is sample output - yours may be different.
0

echo -n "text" | pbcopy

gelldur · 2016-05-09 12:28:44 13
‹ First < 46 47 48 49 50 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Query ip pools based on successive netnames via whois

Useful if you f.i. want to block/allow all connections from a certain provider which uses successive netnames for his ip blocks. In this example I used the german Deutsche Telekom which has DTAG-DIAL followed by a number as netname for the dial in pools. There are - as always ;) - different ways to do this. If you have seq available you can use $ net=DTAG-DIAL ; for i in `seq 1 30`; do whois -h whois.ripe.net $net$i | grep '^inetnum:' | sed "s;^.*:;$net$i;" ; done or without seq you can use bash brace expansion $ net=DTAG-DIAL ; for i in {1..30}; do whois -h whois.ripe.net $net$i | grep '^inetnum:' | sed "s;^.*:;$net$i;" ; done or if you like while better than for use something like $ net=DTAG-DIAL ; i=1 ; while true ; do whois -h whois.ripe.net $net$i | grep '^inetnum:' | sed "s;^.*:;$net$i;" ; test $i = 30 && break ; i=$(expr $i + 1) ; done and so on.

Quick and dirty convert to flash

This converts any media ffmpeg handles to flash. It would actually convert anything to anything, it's based on the file extension. It doesn't do ANY quality control, sizing, etc, it just does what it thinks is best. I needed an flv for testing, and this spits one out easily.

A formatting test for David Winterbottom: improving commandlinefu for submitters

Commandlinefu.com is great but has a few bugs when people are submitting new commands: . 1. There is no preview button. This was a minor inconvenience before, but now is a major problem since new commands won't show up to be edited until they have been moderated. . 2. White space in the description field and in the comments is almost completely lost. People resort to using periods in between paragraphs to force a line break. Indentation of code is ridiculous. . 3. Many characters get munged. . 3a. For example, a less than character in the description gets read as an HTML tag and discarded. In order to type a less than, I've had to type "<" (I hope that comes out right). Unfortunately, when re-editing a command, the HTML entity is turned into a literal less than character, which I have to change back by hand before saving. 3b. Some unicode characters work in the description field, but turn into ugly literal HTML strings when put in the sample output or in an additional command using the $ prefix. . For example, here is a unicode character: ❥ $ Here is the same character after a dollar sign: ❥ . 3c. Some unicode characters don't work anywhere. Bizarrely, it appears to be the most commonly needed ones, such as Latin-1 accented characters. Here are some examples, . Bullet: ?, Center dot: ?, Umlaut u: ?. . 4. Here is an example of the greater than, >, and less than,

Runs previous command replacing foo by bar every time that foo appears

Very useful for rerunning a long command changing some arguments globally. As opposed to ^foo^bar, which only replaces the first occurrence of foo, this one changes every occurrence.

give me back my sound card

for when a program is hogging the sound output. finds, and kills. add -9 to the end for wedged processes. add in 'grep ^program' after lsof to filter.

retab in vim, tab to space or space to tab, useful in python

usage： :[rang]ret[!][tabstop value] python is indent sensitive, after command :set list you may see your codes are mixed with tab and space ret can help you to convert space to tab or tab to space

quit gvim remotely

Calculate days on which Friday the 13th occurs

I removed the dependency of the English language

GREP a PDF file.

This is a good alternative to pdf2text for Ubuntu. To install it: sudo apt-get install python-pdfminer

function to compute what percentage of X is Y? Where percent/100 = X/Y => percent=100*X/Y

This function make it easy to compute X/Y as a percentage. The name "wpoxiy" is an acronym of "what percentage of X is Y"

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using echo

Commands using echo (1,545) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using echo (1,545)

sorted by