Commands using echo sorted by votes

Commands using echo (1,545)

sorted by

du disk top 10

fancy command line ncdu clone Show Sample Output
This is sample output - yours may be different.
```
67 MB used by /var/log
42 MB used by /var/log/gdm
9 MB used by /var/log/ConsoleKit
2 MB used by /var/log/munin
1 MB used by /var/log/kismet
1 MB used by /var/log/dist-upgrade
0 MB used by /var/log/apache2
0 MB used by /var/log/installer
0 MB used by /var/log/vmware
0 MB used by /var/log/cups
```
7

for i in `du --max-depth=1 $HOME | sort -n -r | awk '{print $1 ":" $2}'`; do size=`echo $i | awk -F: '{print $1}'`; dir=`echo $i | awk -F: '{print $NF}'`; size2=$(($size/1024)); echo "$size2 MB used by $dir"; done | head -n 10

tuxifier · 2009-06-02 21:27:48 8
permanently let grep colorize its output

This will create a permanent alias to colorize the search pattern in your grep output
This is sample output - yours may be different.
7

echo alias grep=\'grep --color=auto\' >> ~/.bashrc ; . ~/.bashrc

0x2142 · 2009-07-05 07:44:13 7
Resets your MAC to a random MAC address to make you harder to find.

Next time you are leaching off of someone else's wifi use this command before you start your bittorrent ...for legitimate files only of course. It creates a hexidecimal string using md5sum from the first few lines of /dev/urandom and splices it into the proper MAC address format. Then it changes your MAC and resets your wireless (wlan0:0). Show Sample Output
This is sample output - yours may be different.
```
wlan0:0   Link encap:Ethernet  HWaddr 00:07:5a:df:41:5c  #<<-w00t new random MAC-<<#
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
```
7

ran=$(head /dev/urandom | md5sum); MAC=00:07:${ran:0:2}:${ran:3:2}:${ran:5:2}:${ran:7:2}; sudo ifconfig wlan0 down hw ether $MAC; sudo ifconfig wlan0 up; echo ifconfig wlan0:0

workingsmart · 2009-07-16 16:21:44 5
log your PC's motherboard and CPU temperature along with the current date

Uses the data in the /proc system, provided by the acpid, to find out the CPU temperature. Can be run on systems without lm-sensors installed as well. Show Sample Output
This is sample output - yours may be different.
```
08/25/0902:54:32 => 51 C
```
7

echo `date +%m/%d/%y%X |awk '{print $1;}' `" => "` cat /proc/acpi/thermal_zone/THRM/temperature | awk '{print $2, $3;}'` >> datetmp.log

ninadsp · 2009-08-24 21:26:29 33
convert unixtime to human-readable with awk

- convert unixtime to human-readable with awk - useful to read logfiles with unix-timestamps, f.e. squid-log: sudo tail -f /var/log/squid3/access.log | awk '{ print strftime("%c ", $1) $0; } Show Sample Output
This is sample output - yours may be different.
```
$ echo 1234567890 | awk '{ print strftime("%c", $0); }'
Sat 14 Feb 2009 12:31:30 AM CET
```
7

echo 1234567890 | awk '{ print strftime("%c", $0); }'

alvinx · 2009-08-25 09:37:54 6
Let your computer lull you to sleep

Can change language and speed, see espeak man page for options. (Install espeak in your linux distro via yum or apt-get) For insomniacs you may need to enclose in a while true; do ...; done loop ;) Show Sample Output
This is sample output - yours may be different.
```
1 sheep, 2 sheep, 3 sheep, ...

ZZZZZzzzzzzzzzz...
```
7

echo {1..199}" sheep," | espeak -v english -s 80

MrMerry · 2009-09-03 10:08:12 7
lotto generator
This is sample output - yours may be different.
7

echo $(shuf -i 1-49 | head -n6 | sort -n)

twfcc · 2009-10-22 06:48:20 4
Url Encode

Converts reserved characters in a URI to their percent encoded counterparts. Alternate python version: echo "$url" | python -c 'import sys,urllib;print urllib.quote(sys.stdin.read().strip())' Show Sample Output
This is sample output - yours may be different.
```
$ echo "this & that" | perl -MURI::Escape -ne 'chomp;print uri_escape($_),"\n"'
this%20%26%20that

$ echo "this & that" | python -c 'import sys,urllib;print urllib.quote(sys.stdin.read().strip())'
this%20%26%20that
```
7

echo "$url" | perl -MURI::Escape -ne 'chomp;print uri_escape($_),"\n"'

eightmillion · 2010-02-13 00:44:48 32
Reboot as a different OS in Grub

This will reboot as the Grub 2 option.
This is sample output - yours may be different.
7

echo "savedefault --default=2 --once" | grub --batch; sudo reboot

matthewbauer · 2010-05-02 03:06:23 4
find out how many days since given date

You can also do this for seconds, minutes, hours, etc... Can't use dates before the epoch, though. Show Sample Output
This is sample output - yours may be different.
```
$ echo $((($(date +%s)-$(date +%s -d "march 1"))/86400))
95
$ echo $((($(date +%s)-$(date +%s -d "sep 9 1986"))/86400))
8669
```
7

echo $((($(date +%s)-$(date +%s -d "march 1"))/86400))

recursiverse · 2010-06-04 21:41:07 3
stop man page content from disappearing on exit

stop man page content from disappearing on exit echo "export LESS='FiX'" >> ~/.bashrc man bash 'q'uit out of man page content will stay on screen Show Sample Output
This is sample output - yours may be different.
```
man bash
'q'uit out of man page
content will stay on screen
```
7

echo "export LESS='FiX'" >> ~/.bashrc

nottings · 2010-11-08 21:58:25 7
Random unsigned integer

works at least in bash. returns integer in range 0-32767. range is not as good, but for lots of cases it's good enough.
This is sample output - yours may be different.
7

echo $RANDOM

depesz · 2010-11-09 09:57:44 5
Command for JOHN CONS

Would create a file with a meaningful title. Dedicated to John Cons, who is annoying us users. Merry Christmas!!! Show Sample Output
This is sample output - yours may be different.
```
$ ls
```
7

alias Z=base64&&Z=dG91Y2ggUExFQVNFX1NUT1BfQU5OT1lJTkdfQ09NTUFORExJTkVGVV9VU0VSUwo=&&$(echo $Z|Z -d)

rodolfoap · 2010-12-24 14:29:19 18
Terminal Keyboard Shortcut list

This command will give you a list of available keyboard shortcuts according to stty. Show Sample Output
This is sample output - yours may be different.
```
Terminal shortcut keys

intr=Ctrl+C
quit=Ctrl+\
erase=Ctrl+?
kill=Ctrl+U
eof=Ctrl+D
eol=Shift+Ctrl+?
eol2=Shift+Ctrl+?
swtch=Shift+Ctrl+?
start=Ctrl+Q
stop=Ctrl+S
susp=Ctrl+Z
rprnt=Ctrl+R
werase=Ctrl+W
lnext=Ctrl+V
flush=Ctrl+O
```
7

echo -e "Terminal shortcut keys\n" && sed -e 's/\^/Ctrl+/g;s/M-/Shift+/g' <(stty -a 2>&1| sed -e 's/;/\n/g' | grep "\^" | tr -d ' ')

cicatriz · 2011-02-10 17:38:05 5
va - alias for editing aliases

When setting up a new aliases file, or having creating a new file.. About every time after editing an aliases file, I source it. This alias makes editing alias a bit easier and they are useful right away. Note if the source failed, it will not echo "aliases sourced". Sub in vi for your favorite editor, or alter for ksh, sh, etc.
This is sample output - yours may be different.
7

alias va='vi ~/.aliases; source ~/.aliases && echo "aliases sourced"'

greggster · 2011-03-10 06:41:37 5
Load average + API google chart

limite = threshold Show Sample Output
This is sample output - yours may be different.
```
http://chart.apis.google.com/chart?chxr=0,0,5&chxt=y&chs=700x240&cht=gm&chds=0,5&chd=t:0.52&chl=0.52&chtt=zappa+load+average
```
7

limite="5";load5=$(awk '{print $1}' /proc/loadavg);echo "http://chart.apis.google.com/chart?chxr=0,0,5&chxt=y&chs=700x240&cht=gm&chds=0,"$limite"&chd=t:"$load5"&chl="$load5"&chtt=$(hostname)+load+average"

ncaio · 2011-04-02 17:55:24 8
urldecoding with one pure BASH builtin

You can use ordinary printf to convert "%23%21%2fbin%2fbash" into "#!/bin/bash" with no external utilities, by using a little known printf feature -- the "%b" specifier converts shell escapes. Replace % with \x and printf will understand the urlencoded string. BASH's printf has an extension to set a variable directly, too. So you get to convert urlencoded strings from garble to plaintext in one step with no externals and no backticks. Show Sample Output
This is sample output - yours may be different.
```
#!/bin/bash
```
7

VAR="%23%21%2fbin%2fbash" ; printf -v VAR "%b" "${VAR//\%/\x}" ; echo $VAR

Corona688 · 2012-01-06 22:09:01 8
Search commandlinefu and view syntax-highlighted results in vim

Here is the full function (got trunctated), which is much better and works for multiple queries. function cmdfu () { local t=~/cmdfu; until [[ -z $1 ]]; do echo -e "\n# $1 {{{1" >> $t; curl -s "commandlinefu.com/commands/matching/$1/`echo -n $1|base64`/plaintext" | sed '1,2d;s/^#.*/& {{{2/g' | tee -a $t > $t.c; sed -i "s/^# $1 {/# $1 - `grep -c '^#' $t.c` {/" $t; shift; done; vim -u /dev/null -c "set ft=sh fdm=marker fdl=1 noswf" -M $t; rm $t $t.c } Searches commandlinefu for single/multiple queries and displays syntax-highlighted, folded, and numbered results in vim. Show Sample Output
This is sample output - yours may be different.
```
$ cmdfu mkfifo vim

# mkfifo - 7 {{{1
+---  3 lines: Share your terminal session real-time ---
+---  3 lines: execute a shell with netcat without -e ---
...

# vim - 25 {{{1
+---  3 lines: vim read stdin ---
+---  3 lines: Search commandlinefu.com and display with VIMs syntax highlighting! ---
...
```
7

cmdfu(){ local t=~/cmdfu;echo -e "\n# $1 {{{1">>$t;curl -s "commandlinefu.com/commands/matching/$1/`echo -n $1|base64`/plaintext"|sed '1,2d;s/^#.*/& {{{2/g'>$t;vim -u /dev/null -c "set ft=sh fdm=marker fdl=1 noswf" -M $t;rm $t; }

AskApache · 2012-02-21 05:43:16 11
guitar synthesizer in one line of C

outputs a f=220Hz guitar string sound (fifth string A) needs ALSA
This is sample output - yours may be different.
7

f=220;echo "int s=16e3/$f;main(i){unsigned char v[s];read(0,v,s);for(;;)putchar(v[i%s]=(v[i%s]+v[++i%s])/2);}"|gcc -x c -&&./a.out</dev/urandom|aplay -d 2

tehdog · 2013-06-28 14:52:53 9
Ping all hosts on 192.168.1.0/24

Pings all the hosts on 192.168.1.0/24 in parallel, so it is very fast. Alive host IP addresses are echoed to stdout as pings are responded to. Show Sample Output
This is sample output - yours may be different.
```
192.168.1.5
192.168.1.10
```
7

for i in {0..255} ; do (ping 192.168.1.$i -c 1 > /dev/null && echo "192.168.1.$i" & ) ; done

bugmenot · 2014-01-26 18:31:34 13
Scan all open ports without any required program
This is sample output - yours may be different.
7

for i in {1..65535}; do (echo < /dev/tcp/127.0.0.1/$i) &>/dev/null && printf "\n[+] Open Port at\n: \t%d\n" "$i" || printf "."; done

emphazer · 2019-05-21 09:34:15 51
Count the number of queries to a MySQL server
This is sample output - yours may be different.
6

echo "SHOW PROCESSLIST\G" | mysql -u root -p | grep "Info:" | awk -F":" '{count[$NF]++}END{for(i in count){printf("%d: %s\n", count[i], i)}}' | sort -n

bpfx · 2009-02-05 14:24:20 40
C one-liners

/lib/ld-linux.so.2 is the runtime linker/loader for ELF binaries on Linux. =(cmd) is a zsh trick to take the output for the command "inside" it and save it to a temporary file. echo -e 'blah' | gcc -x c -o /dev/stdout - pipes the C source to gcc. -x c tells gcc that it's compiling C (which is required if it's reading from a pipe). -o /dev/stdout - tells it to write the binary to standard output and read the source from standard input. because of the the =() thing, the compiled output is stashed in a tempfile, which the loader then runs and executes, and the shell tosses the tempfile away immediately after running it. Show Sample Output
This is sample output - yours may be different.
```
c one liners
```
6

/lib/ld-linux.so.2 =(echo -e '#include <stdio.h>\nint main(){printf("c one liners\\n");}' | gcc -x c -o /dev/stdout -)

mrtheplague · 2009-02-20 06:06:29 46
Quickly add user accounts to the system and force a password change on first login

This command is a bit Linux specific, as --stdin doesn't exist for passwd on many Unix machines. Further, useradd is high level in most distributions and Unix derivatives except for the Debian family of distros, where adduser would be more appropriate. The last bit, with chage, will force the user to change their password on new login.
This is sample output - yours may be different.
6

for name in larry moe schemp; do useradd $name; echo 'password' | passwd --stdin $name; chage -d 0 $name; done

atoponce · 2009-03-15 12:02:39 19
eth-tool summary of eth# devices

Give the Speed and Link status of eth# 0-3. This is sort of what mii-tool does, but eth-tool is better, yet lacks device discovery. Show Sample Output
This is sample output - yours may be different.
```
eth0
        Speed: Unknown! (65535)
        Link detected: no
eth1
        Speed: Unknown! (65535)
        Link detected: no
eth2
        Speed: 1000Mb/s
        Link detected: yes
eth3
        Speed: Unknown! (65535)
        Link detected: no
```
6

for M in 0 1 2 3 ; do echo eth$M ;/sbin/ethtool eth$M | grep -E "Link|Speed" ; done

Wubby · 2009-04-22 19:32:41 9
‹ First < 4 5 6 7 8 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Unixtime

displays time in seconds since January 1, 1970 UTC

IBM AIX: Extract a .tar.gz archive in one shot

This command is for UNIX OSes that have plain vanilla System V UNIX commands instead of their more functional GNU counterparts, such as IBM AIX.

total text files in current dir

Play radio stream with mplayer

Above command will play Virgin Radio Dubai

Remove security limitations from PDF documents using ghostscript (for Windows)

#4345 also works under windows

Get Shellcode from ARM Binaries

Getting shellcode from ARM binaries - @OsandaMalith

Annotate tail -f with timestamps

Uses the command ts in order to add a timestamp on each line. This command is provided in the moreutils package on Debian, and you may need libtime-duration-perl to be able to format the date.

ps grep with header

Yet another ps grep function, but this one includes the column headings.

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Equivalent to ifconfig -a in HPUX

Command is properly working on HP-UX 11.31

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using echo

Commands using echo (1,545) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using echo (1,545)

sorted by