Commands using echo sorted by votes

Commands using echo (1,545)

sorted by

quick and easy way of validating a date format of yyyy-mm-dd and returning a boolean

Quick and easy way of validating a date format of yyyy-mm-dd and returning a boolean, the regex can easily be upgraded to handle "in betweens" for mm dd or to validate other types of strings, ex. ip address. Boolean output could easily be piped into a condition for a more complete one-liner.
This is sample output - yours may be different.
-1

echo 2006-10-10 | grep -c '^[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]$'

rez0r · 2009-05-11 22:18:43 7
Organize a TV-Series season

It happened to me that I got a season of a tv-show which had all files under the same folder like /home/blah/tv_show/season1/file{1,2,3,4,5,...}.avi But I like to have them like this: /home/blah/tv_show/season1/e{1,2,3,4,5,...}/file{1,2,3,4,5,...}.avi So I can have both the srt and the avi on one folder without cluttering much. This command organizes everything assuming that the filename contains Exx where xx is the number of the episode. You may need to set: IFS=$'\n' if your filenames have spaces.
This is sample output - yours may be different.
-1

season=1; for file in $(ls) ; do dir=$(echo $file | sed 's/.*S0$season$E[0-9]\{2\}$.*/\1/'); mkdir $dir ; mv $file $dir; done

lonecat · 2009-05-27 03:30:58 4
Sort a list of numbers on on line, separated by spaces.

You can replace "sort -nu" with "sort -u" for a word list sorted or "sort -R" for a random-sorted line (edit: corrected) Show Sample Output
This is sample output - yours may be different.
```
$ echo "4 2  3 5  2 52  11" | sed "s/$ \|$$/\n/g" | sort -nu | tr "\n" " "| sed -e "s/^ *//" -e "s/ $//"
2 3 4 5 11 52
```
-1

echo $numbers | sed "s/$ \|$$/\n/g" | sort -nu | tr "\n" " " | sed -e "s/^ *//" -e "s/ $//"

chickenzilla · 2009-06-24 15:12:17 7
dig this
This is sample output - yours may be different.
-1

for dnsREC in $(curl -s http://www.iana.org/assignments/dns-parameters |grep -Eo ^[A-Z\.]+\ |sed 's/TYPE//'); do echo -n "$dnsREC " && dig +short $dnsREC IANA.ORG; done

commandlinefu · 2009-09-01 03:11:18 3
Sort a character string

using awk missed the last char thanks @Josay Show Sample Output
This is sample output - yours may be different.
```
aeeelmoprsst
```
-1

echo sortmeplease | awk '{l=split($1,a,"");asort(a);while(x<=l){printf "%s",a[x];x++ }print "";}'

foob4r · 2009-09-03 10:22:39 4
Capitalize the word with dd
This is sample output - yours may be different.
-1

echo capitalize | { dd bs=1 count=1 conv=ucase 2> /dev/null; cat ;}

twfcc · 2009-09-05 01:49:53 40
search for a file in PATH

search argument in PATH accept grep expressions without args, list all binaries found in PATH Show Sample Output
This is sample output - yours may be different.
```
$ sepath noo
/usr/openwin/bin/ttsnoop
/usr/sbin/snoop
$ sepath ^ps$
/bin/ps
/usr/bin/ps
/usr/ucb/ps
```
-1

function sepath { echo $PATH |tr ":" "\n" |sort -u |while read L ; do cd "$L" 2>/dev/null && find . $ ! -name . -prune $ $ -type f -o -type l $ 2>/dev/null |sed "s@^\./@@" |egrep -i "${*}" |sed "s@^@$L/@" ; done ; }

mobidyc · 2009-09-11 15:03:22 5
search for a file in PATH

Searches in order of the directories of $PATH. Stops after finding the entry; looks for only that fileName. Works in Bourne, Korn, Bash and Z shells. Show Sample Output
This is sample output - yours may be different.
```
/usr/local/bin/fileName
```
-1

for L in `echo :$PATH | tr : '\n'`; do F=${L:-"."}/fileName; if [ -f ${F} -o -h ${F} ]; then echo ${F}; break; fi; done

arcege · 2009-09-11 16:14:36 3
regex to match an ip

Handles everything except octets with 255. Ran through ip generator with variable octet lengths.
This is sample output - yours may be different.
-1

echo 127.0.0.1 | egrep -e '^(([01]?[0-9]{1,2}|2[0-4][0-9]|25[0-4])\.){3}([01]?[0-9]{1,2}|2[0-4][0-9]|25[0-4])$'

arcege · 2009-09-17 17:40:48 3
for loop with leading zero in bash 3

Bash 4 will let you do {00..19} to get leading zeros, but Bash 3 doesn't have that feature. This technique gets you partway there (the sequences need be such that the last digit ranges from zero to nine - you can't use this for something like Bash 4's {03..27}, for example). When this limitation is not a problem, you can avoid some complicated string manipulation for concatenating leading zeros. You can add more digits like this: {0..1}{0..9}{0..9} (ranges from 0 to 99 with up to two leading zeros). To pad with additional zeros: for i in 000{0..1}{0..9}; do echo $i; done or for i in {0..1}{0..9}; do echo "000$i"; done This is useful for creating values to sort or for creating filenames with a fixed format. Note that this will also work: touch {0..1}{0..9} Show Sample Output
This is sample output - yours may be different.
```
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
```
-1

for i in {0..1}{0..9}; do echo $i; done

dennisw · 2009-09-18 02:51:12 5
Check if variable is a number
This is sample output - yours may be different.
-1

echo $X | egrep "^[0-9]+$"

sharfah · 2009-10-09 13:59:47 6
Email if you disk is over 90%

Email if you disk is over 90% - www.fir3net.com
This is sample output - yours may be different.
-1

HDD=$(df | awk ' NR>3 (S=$5) (M=$6) { if (S>90) print "Your Systems "M" is """S" Full" } ') ; [[ $HDD ]] && echo "$HDD" | mail -s "Hard-Drives Full" TO@EMAIL.com -- -f FROM@EMAIL.com >/dev/null

felix001 · 2009-10-16 06:52:36 5
Partition a new disk as all one partition tagged as "LInux LVM"

This is a bit hacky, but if you're setting up a bunch of new LUNs, it can save a bunch of time. Also check out sfdisk. The fdisk will fail if, for example, a partition table already exists.
This is sample output - yours may be different.
-1

echo -e "n\np\n1\n\n\nt\n8e\nw" | fdisk /dev/sdX

sud0er · 2009-10-20 16:21:54 5
password generator

make password randomly, default 8 char
This is sample output - yours may be different.
-1

genpass() { local h x y;h=${1:-8};x=( {a..z} {A..Z} {0..9} );y=$(echo ${x[@]} | tr ' ' '\n' | shuf -n$h | xargs);echo -e "${y// /}"; }

twfcc · 2009-10-24 04:05:42 4
Friendly command-not-found message.

This will give you a friendly warning if a command doesn't exists. Show Sample Output
This is sample output - yours may be different.
```
$ aptitypo
...
```
-1

command_not_found_handle() { echo 6661696c626f61742e2e2e0a | xxd -p -r; }

unixmonkey7301 · 2009-12-03 21:33:35 4
Know when you will type :q in your term instead of vi(m), the alias will chewed you out.

For vi(m) users : Add it in your ~/.bashrc Add an "exit" @ the end if you are masochist ;) Show Sample Output
This is sample output - yours may be different.
```
this is NOT vi(m) :/
```
-1

alias :q='tput setaf 1; echo >&2 "this is NOT vi(m) :/"; tput sgr0'

sputnick · 2009-12-08 12:59:44 3
prints line numbers

Yep, is hard, but is a way more flexible using pipe.
This is sample output - yours may be different.
-1

cat infile | while read str; do echo "$((++i)) - $str" ; done;

glaudiston · 2009-12-09 14:05:09 3
prints line numbers

Hi glaudiston, you can save a few chars by leaving out cat and pipe and still enjoy the added flexibility.
This is sample output - yours may be different.
-1

while read str; do echo "$((++i)) - $str"; done < infile

putnamhill · 2009-12-09 15:11:25 3
[Gentoo] Input modules, commented, in your module.autoload file

Whenever you compile a new kernel, there are always new modules. The best way to make sure you have the correct modules loaded when you boot is to add all your modules in the modules.autoload file (they will be commented) and uncomment all those modules you need. Also a good way to keep track of the available modules in your system. For other distros you may have to change the name of the file to /etc/modprobe.conf Show Sample Output
This is sample output - yours may be different.
```
# /etc/modules.autoload.d/kernel-2.6:  kernel modules to load when system boots.
#
# Note that this file is for 2.6 kernels.
#
# Add the names of modules that you'd like to load when the system
# starts into this file, one per line.  Comments begin with # and
# are ignored.  Read man modules.autoload for additional details.

# For example:
# aic7xxx
# mixer-oss.ko
# pcm-oss.ko
# seq-device.ko
# seq-oss.ko
# snd-seq.ko
```
-1

find /lib/modules/`uname -r`/ -type f -iname '*.o' -or -iname '*.ko' |grep -i -o '[a-z0-9]*[-|_]*[0-9a-z]*\.ko$' |xargs -I {} echo '# {}' >>/etc/modules.autoload.d/kernel-2.6

paragao · 2010-01-13 02:12:08 4
displays a reminder message at the specified time
This is sample output - yours may be different.
-1

echo "DISPLAY=$DISPLAY xmessage convert db to innodb" | at 00:00

op4 · 2010-02-04 04:02:35 4
Send web page by e-mail

This will send the web page at $u to recipient@example.com . To send the web page to oneself, recipient@example.com can be replaced by $(whoami) or $USER. The "charset" is UTF-8 here, but any alternative charset of your choice would work. `wget -O - -o /dev/null $u` may be considered instead of `curl $u` . On some systems the complete path to sendmail may be necessary, for instance /sys/pkg/libexec/sendmail/sendmail for some NetBSD.
This is sample output - yours may be different.
-1

{ u="http://twitter.com/commandlinefu"; echo "Subject: $u"; echo "Mime-Version: 1.0"; echo -e "Content-Type: text/html; charset=utf-8\n\n"; curl $u ; } | sendmail $USER

pascalvaucheret · 2010-02-24 04:18:30 5
x bottles of beer on the wall graph

Will create a graph of the results for "x bottles of beer on the wall". Requires Gnuplot. Inspired by an xkcd comic: http://xkcd.com/715/ For sample output see: http://tr.im/xbottlesofbeer Show Sample Output
This is sample output - yours may be different.
```
See http://tr.im/xbottlesofbeer
```
-1

(echo "plot '-' with lines"; for x in $(seq 1 100); do curl -s "http://ajax.googleapis.com/ajax/services/search/web?v=1.0&q=$(echo $x bottles of beer on the wall|sed 's/ /%20/g')"|sed 's/.*"estimatedResultCount":"$[^"]*$".*/\1\n/';done)|gnuplot -persist

matthewbauer · 2010-03-17 21:04:36 4
Split a file into equal size chunks and archive to (e)mail account.

This is just a little snippit to split a large file into smaller chunks (4mb in this example) and then send the chunks off to (e)mail for archival using mutt. I usually encrypt the file before splitting it using openssl: openssl des3 -salt -k <password> -in file.tgz -out file.tgz.des3 To restore, simply save attachments and rejoin them using: cat file.tgz.* > output_name.tgz and if encrypted, decrypt using: openssl des3 -d -salt -k <password> -in file.tgz.des3 -out file.tgz edit: (changed "g" to "e" for political correctness)
This is sample output - yours may be different.
-1

split -b4m file.tgz file.tgz. ; for i in file.tgz.*; do SUBJ="Backup Archive"; MSG="Archive File Attached"; echo $MSG | mutt -a $i -s $SUBJ YourEmail@(E)mail.com

tboulay · 2010-03-20 16:49:19 8
Leap year calculation
This is sample output - yours may be different.
-1

year=2010; math=`echo "$year%4" | bc`; [ ! -z $year ] && [ $math -eq 0 ] && echo "$year is leap year!" || echo "$year isn't leap year";

mvrilo · 2010-03-30 15:33:00 4
Bash function to see if the day ends in

The shell has perfectly adequate pattern matching for simple expressions. Show Sample Output
This is sample output - yours may be different.
```
ok
```
-1

function ends_in_y() { case $(date +%A) in *y ) true ;; * ) false ;; esac } ; ends_in_y && echo ok

unixmonkey9199 · 2010-04-06 22:18:52 3
‹ First < 50 51 52 53 54 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

list files recursively by size

Output system statistics every 5 seconds with timestamp

See man vmstat for information about the statistics. This does the same thing without the timestamp: $vmstat 5

quickly formats a fat partition. usefull for flash drives

Benchmark SQL Query

Benchmark a SQL query against MySQL Server. The example runs the query 10 times, and you get the average runtime in the output. To ensure that the query does not get cached, use `RESET QUERY CACHE;` on top in the query file.

Create Bash script to change modification time of files

Create a bash script to change the modification time for each file in 'files.txt' such that they are in the same order as in 'files.txt' File name for bash script specified by variable, 'scriptName'. It is made an executable once writing into it has been completed.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Do a command but skip recording it in the bash command history

Note the extra space before the command (I had to put it as an underscore since the website eats up preceding spaces). That's all it takes. Now if you check your history with "$ history", it wont show up.

Play random music from blip.fm

Unrar multiple directories into current working directory

Grabs all rar files in any current subdirectories and feeds it to unrar. Doesn't work well with things packaged like file.part01.rar. Works best with File.rar. You can recurse into other directories by adding more /*'s

Paged, colored svn diff

I put this in a shell script called "svndiff", as it provides a handy decorated "svn diff" output that is colored (which you can't see here) and paged. The -r is required so less doesn't mangle the color codes.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using echo

Commands using echo (1,545) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using echo (1,545)

sorted by