Commands using egrep sorted by votes

Commands using egrep (220)

sorted by

Equivalent to ifconfig -a in HPUX
This is sample output - yours may be different.
0

netstat -nr|egrep -v "Routing|Interface|lo0"|awk '{print $5}'|sort -u| while read l; do ifconfig $l ; echo " Station Addr: `lanscan -ia|grep "$l "|cut -d ' ' -f 1`" ; done

innominable · 2014-10-31 09:20:46 7
List only X byte files in the current directory

This will list all the files that are a gigabyte or larger in the current working directory. Change the G in the regex to be a M and you'll find all files that are a megabyte up to but not including a gigabyte. Show Sample Output
This is sample output - yours may be different.
```
1.8G	Desktop
4.9G	Documents
3.7G	Google Drive
1.4G	Library
 37G	VirtualBoxVMs
8.7G	src
```
0

du -hs * |egrep -i "^(\s?\d+\.?\d+G)"

krizzo · 2014-12-09 15:23:21 9
Show a config file without comments

This will remove all blank lines and lines that start with # to use for commented ines (irrespective of where the # starts in the line).
This is sample output - yours may be different.
0

egrep -v "^$|^.*#" file

greatp123 · 2015-01-01 18:53:18 14
Show drive names next to their full serial number (and disk info)

This is much easier to parse and do something else with (eg: automagically create ZFS vols) than anything else I've found. It also helps me keep track of which disks are which, for example, when I want to replace a disk, or image headers in different scenarios. Being able to match a disk to the kernels mapping of said drive the disks serial number is very helpful ls -l /dev/disk/by-id Normal `ls` command to list contents of /dev/disk/by-id grep -v "wwn-" Perform an inverse search - that is, only output non-matches to the pattern 'wwn-' egrep "[a-zA-Z]{3}$" A regex grep, looking for three letters and the end of a line (to filter out fluff) sed 's/\.\.\/\.\.\///' Utilize sed (stream editor) to remove all occurrences of "../../" sed -E 's/.*[0-9]{2}:[0-9]{2}\s//' Strip out all user and permission fluff. The -E option lets us use extended (modern) regex notation (larger control set) sed -E 's/->\ //' Strip out ascii arrows "-> " sort -k2 Sort the resulting information alphabetically, on column 2 (the disk letters) awk '{print $2,$1}' Swap the order of the columns so it's easier to read/utilize output from sed 's/\s/\t/' Replace the space between the two columns with a tab character, making the output more friendly For large ZFS pools, this made creating my vdevs immeasurably easy. By keeping track of which disks were in which slot (spreadsheet) via their serial numbers, I was able to then create my vols simply by copying and pasting the full output of the disk (not the letter) and pasting it into my command. Thereby allowing me to know exactly which disk, in which slot, was going into the vdev. Example command below. zpool create tank raidz2 -o ashift=12 ata-... ata-... ata-... ata-... ata-... ata-... Show Sample Output
This is sample output - yours may be different.
```
sda     ata-Samsung_SSD_840_PRO_Series_SERIALSERIAL
sdb     ata-WDC_WD30EFRX-INFOINFOINFO
sdc     ata-WDC_WD30EFRX-INFOINFOINFO
sdd     ata-WDC_WD30EFRX-INFOINFOINFO
sde     ata-WDC_WD30EFRX-INFOINFOINFO
sdf     ata-WDC_WD30EFRX-INFOINFOINFO
```
0

ls -l /dev/disk/by-id |grep -v "wwn-" |egrep "[a-zA-Z]{3}$" |sed 's/\.\.\/\.\.\///' |sed -E 's/.*[0-9]{2}:[0-9]{2}\s//' |sed -E 's/->\ //' |sort -k2 |awk '{print $2,$1}' |sed 's/\s/\t/'

lig0n · 2015-01-25 19:29:40 8
grep for 2 words existing on the same line

grep for 2 words existing on the same line
This is sample output - yours may be different.
0

egrep 'word1.*word2' --color /path/file.log |more

alissonf · 2015-04-28 15:09:45 9

How to capture ICAP headers with tcpdump

Human readable representation of the headers of an ICAP request, using tcpdump Show Sample Output

idodekov · 2015-05-29 12:58:27 9

List widescreen wallpapers in current dir

Checks if the aspect ratio is approximately 1.6 (16:10) or ~1.77777778 (16:9). Requires mpv_identify from mpv project https://github.com/mpv-player/mpv/blob/master/TOOLS/mpv_identify.sh (this replaces mplayer -identify, or midentify) Show Sample Output
This is sample output - yours may be different.
```
video_aspect=1.778646
video_aspect=1.777778
```
0

./mpv_identify.sh * | egrep '^video_aspect=1\.[67]'

Tatsh · 2015-09-29 05:47:07 11
Not able to data in tee on using dual command like: tail and grep
This is sample output - yours may be different.
0

tail -f log.txt | egrep --line-buffered 'WARN|ERROR' | tee filtered_output.txt

zarvis · 2015-09-29 11:12:52 9
checking if an IP is valid.
This is sample output - yours may be different.
0

echo $IP | egrep '^(([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])$'

andregyn62 · 2015-10-19 18:06:32 11
Search for files with non-Unix line endings
This is sample output - yours may be different.
0

egrep -l $'\r'\$ *

swarzynski · 2015-11-19 10:57:47 11
Count relevant lines of shell code in a git repo

Uses git grep for speed, relies on a valid she-bang, ignores leading whitespace when stripping comments and blank lines Show Sample Output
This is sample output - yours may be different.
```
% egrep -v '^\s*($|#)' $(git grep -l '#!/bin/.*sh' *) | wc -l
14079
```
0

egrep -v '^\s*($|#)' $(git grep -l '#!/bin/.*sh' *) | wc -l

Natureshadow · 2016-02-15 11:15:48 15
Erase Logs / Cache
This is sample output - yours may be different.
0

bleachbit -l | egrep 'cache|log' | xargs bleachbit -c

renous · 2016-02-28 15:20:47 12
Btrfs: Find file names with checksum errors

debian kernel 4.4.6 Show Sample Output
This is sample output - yours may be different.
```
images/10000/vm-10000-disk-1.raw
images/8001/BUGBTRFS/vm-8001-disk-2.raw
images/9003/vm-9003-disk-2.raw.crash.btrfs
```
0

grep "checksum error at logical" /var/log/messages | egrep -o "[^ ]+$" | tr -d ')' | sort | uniq

andrefalgon · 2016-04-30 09:13:36 8
Calculate comment density of shell scripts in a directory

Show Sample Output
This is sample output - yours may be different.
```
7882 lines = 7576 sloc [96%] + 306 comments [3%]
```
0

dir=/rom; a=$(find $dir -name \*.sh -exec cat '{}' \; | egrep -cv '^[[:space:]]*#'); b=$(find $dir -name \*.sh -exec cat '{}' \; | egrep -c '^[[:space:]]*#'); echo $((a+b)) lines = ${a} sloc [$((a*100/(a+b)))%] + ${b} comments [$((b*100/(a+b)))%]

koniu · 2016-05-19 08:35:56 86
Extract binary from .text section (shellcode)

Extracts the binary from the .text section and escapes it. This puts it in a form ready to use in a program. Show Sample Output
This is sample output - yours may be different.
```
\x31\xd2\x31\xc9\xbb\xb4\x90\x04\x08\xb0\x05\xcd\x80\xb2\x10\xb9\xc4\x90\x04\x08\x89\xc3\xb0\x03\xcd\x80\x89\xdf\xb2\x10\xb9\xc4\x90\x04\x08\xb3\x01\xb0\x04\xcd\x80\x89\xfb\xb0\x06\xcd\x80\xb0\x01\xcd\x80
```
0

objdump -d -j .text ExeHere | grep -e '^ ' | tr '[[:space:]]' '\n' | egrep '^[[:alnum:]]{2}$' | xargs | sed 's/ /\\x/g' | sed -e 's/^/\\x/g'

keyboardsage · 2016-09-11 07:15:00 16
uncompress file that is compressed multiple times

Abort/Break with CTRL-C when no output is shown anymore (break while true loop). Show Sample Output
This is sample output - yours may be different.
```
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0 -- using error.log.0.bz2.0.bz2.0.out
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0.out -- using error.log.0.bz2.0.bz2.0.out.out
bunzip2: Can't guess original name for error.log.0.bz2.0.bz2.0.out.out -- using error.log.0.bz2.0.bz2.0.out.out.out
```
0

while true; do for bzipfile in $(file *|egrep bzip2|awk '{print $1'}|cut -d':' -f1); do bunzip2 $bzipfile; done; done

tapestreamer · 2016-12-12 16:12:18 15
Check spelling of word using regex

Runs on at least MacOS Sierra (in Bash) Show Sample Output
This is sample output - yours may be different.
```
compatibility
```
0

egrep "^compat.bility$" /usr/share/dict/words

demonzrulaz · 2017-02-24 05:20:40 17
Print file excluding comments and blank lines
This is sample output - yours may be different.
0

egrep -v '^$|^#' /etc/sysctl.conf

imjoseangel · 2017-04-17 20:23:09 24
Do mathematical operation on every line of a given file for the first value found to be replaced (other lines stay untouched)

The given file may contain any kind of characters. This is compatible for most simple mathematical operation. For the first number found, it will be replaced by the result of a factor operation of 1000. To change the filename or multiplactor or number regular expression, change the first fixed values. Show Sample Output
This is sample output - yours may be different.
```
For a given filename such as test.csv, a new filename new_test.csv will be created containing the new values after the math operation.
command source: cat test.csv
command output: cat new_test.csv
```
0

n=1000;f="test.csv";r='([0-9]+.{0,1}[0-9]*)';echo -n "" > new_${f};cat $f | while read l;do val=`echo $l | egrep -o $r` ; if [ ! -z $val ];then newval=`echo $val \* $n | bc -l`;l=`echo $l | sed "s/$val/$newval/"`;fi;echo $l >> new_${f};unset val;done

s333 · 2017-04-26 18:04:07 19
Cat without comment
This is sample output - yours may be different.
0

cat /etc/squid/squid.conf | egrep -v "(^#.*|^$)"

tofu00 · 2017-11-29 10:16:49 41
check virt is available
This is sample output - yours may be different.
0

egrep -c '(vmx|svm)' /proc/cpuinfo

aysadk · 2017-12-03 22:48:04 22
Sort installed package on ArchLinux from low to high
This is sample output - yours may be different.
0

pacman -Qi | egrep '^(Name|Installed)' | cut -f2 -d':' | paste - - | column -t | sort -nk 2 | grep MiB

tianyu · 2019-04-21 05:19:56 37
InnoDB related parameters
This is sample output - yours may be different.
0

mysqladmin variables | egrep '(innodb_log_file|innodb_data_file)'

shantanuo · 2020-02-19 10:24:52 76
Change Windows line endings to Unix version

https://www.howtogeek.com/771399/how-to-use-the-find-command-in-linux/
This is sample output - yours may be different.
0

find . -type f -regex '.*\.$cpp\|h$' -exec egrep -l $'\r'\$ {} \; | xargs dos2unix

swarzynski · 2022-08-02 09:28:38 1122
Extract raw URLs from a file
This is sample output - yours may be different.
-1

egrep -ie "<*HREF=(.*?)>" index.html | awk -F\" '{print $2}' | grep ://

wwest4 · 2009-02-05 17:51:14 22
‹ First < 5 6 7 8 9 >

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Copy/move a bunch of files to dot files and back

Install pip with Proxy

Installs pip packages defining a proxy

Find the package that installed a command

Print a date from 3 days ago

This command prints the Date (Not time) from 3 days ago (72 hours ago). This works on systems without GNU date (MacOSX , Solaris, FreeBSD).

list block devices

Shows all block devices in a tree with descruptions of what they are.

Grab the first 3 octets of your ip addresses

For machines that have many ip blocks spanning different Class C's, this will show which ones.

Save a file you edited in vim without the needed permissions (no echo)

Write a file you edited in Vim but that you do not have the permissions to write to (unless you use sudo.) Same as #1204 but without the echo to stdout that I find annoying.

list folders containing less than 2 MB of data

Just shortened the awk a bit and removed sed. Edit: I'm assuming there are no spaces in the path. To support white space in pathname try: $ awk '($1 < 2048) {sub(/^[0-9]+[ \t]+/,""); print $0}'

Adding Prefix to File name

Good old bracket expansion :-) For large numbers of files, "rename" will spare you the for-loop, or the find/exec...

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using egrep

Commands using egrep (220) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using egrep (220)

sorted by