All commands

All commands (14,187)

sorted by

Parse an RPM name into its components - fast

parse_rpm xorg-x11-fonts-ISO8859-1-75dpi-7.1-2.1.el5.noarch.rpm xorg-x11-fonts-ISO8859-1-75dpi 7.1 2.1.el5 noarch It's a little tricky because RPM names can contain '-' and the name, version and release number can contain '.' This is one or two orders of magnitude faster than using rpm itself: rpm -qp --queryformat '%{N} %{V} %{R} %{ARCH}\n' $RPM
This is sample output - yours may be different.
0

parse_rpm() { RPM=$1;B=${RPM##*/};B=${B%.rpm};A=${B##*.};B=${B%.*};R=${B##*-};B=${B%-*};V=${B##*-};B=${B%-*};N=$B;echo "$N $V $R $A"; }

bhepple · 2009-12-19 20:07:26 50
Dump mySQL db from Remote Database to Local Database

You can use this to dump you database from remote db to your local db.
This is sample output - yours may be different.
1

mysqldump --host=[remote host] --user=[remote user] --password=[remote password] -C db_name | mysql --host=localhost --user=[local user] --password=[local password] db_name

all4artz · 2009-12-19 19:47:07 6
Another Matrix Style Implementation

A bit different from some of the other submissions. Has bold and uses all c printable characters. Change the bs=value to speed up and increase the sizes of the bold and non-bold strings.
This is sample output - yours may be different.
5

echo -ne "\e[32m" ; while true ; do echo -ne "\e[$(($RANDOM % 2 + 1))m" ; tr -c "[:print:]" " " < /dev/urandom | dd count=1 bs=50 2> /dev/null ; done

psykotron · 2009-12-19 19:05:04 4
Awk one-liner that sorts a css file by selector
This is sample output - yours may be different.
1

awk '/.*{$/{s[$1]=z[$1]=j+0}{l[j++]=$0}END{asorti(s);for(v in s){while(l[z[s[v]]]!~/}$/)print l[z[s[v]]++];print"}"ORS}}'

pkrumins · 2009-12-19 16:38:33 5
display embeded comments for every --opt, usefull for auto documenting your script

A really fun vim oneliner for auto documenting your option's parsing in your script. # print the text embeded in the case that parse options from command line. # the block is matched with the marker 'CommandParse' in comment, until 'esac' extract_cmdl_options() { # use vim for parsing: # 1st grep the case block and copy in register @p + unindent in the buffer of the file itself # 2nd filter lines which start with --opt or +opt and keep comment on hte following lines until an empty line # 3rd discard changes in the buffer and quit vim -n -es -c 'g/# CommandParse/+2,/^\s\+esac/-1 d p | % d | put p | % -c 'g/^$[-+]\+[^)]\+$)/,/^$\s\+[^- \t#]\|^$$/-1 p' \ -c 'q!' $0 } example code:http://snipplr.com/view/25059/display-embeded-comments-for-every-opt-usefull-for-auto-documenting-your-script/ Show Sample Output
This is sample output - yours may be different.
```
$ ./t_extract_cmdl_options.sh --help
--help)
        # This help message
--some_option)
--etc)
        # nothing done
--exemple)
        # print more example, and exit
```
0

vim -n -es -c 'g/# CommandParse/+2,/^\s\+esac/-1 d p | % d | put p | %<' -c 'g/^$[-+]\+[^)]\+$)/,/^$\s\+[^- \t#]\|^$$/-1 p' -c 'q!' $0

syladmin · 2009-12-19 08:32:00 5
p is for pager

Manpages, command summaries, and pretty much everything else usually have the information you're most likely to want at the beginning. Seeing just the last 40 or so lines of options from a command that has 100 is not super useful, and having to scroll up each time you want to glance at something is spastic. Run this and then do something like p do vi --help and you'll get the first screen(-mostly-)full of vi's usage info and options list Then use p d to page down, and p u to page up. To see the current page again: p r Also useful for situations like p do aptitude search ~dsmorgasbord p next #p sudo aptitude -r install libwickedawesome-perl-snoochieboochies p next p sudo aptitude -r install libwickedawesome-perl-snoochieboochies snazztasticorama-dev-v0.∞ where you're using readline up-arrow, HOME, END, etc., to quickly recall commented commands. For the unaware, that option to aptitude search will bring up all of the packages whose descriptions contain the string "smorgasbord". Depending on your distro, there could potentially be hundreds of them.
This is sample output - yours may be different.
0

p() { l=$LINES; case $1 in do) shift; IFS=$'\n' _pg=( $("$@") ) && _pgn=0 && p r;; r) echo "${_pg[*]:_pgn:$((l-4))}";; d) (( _pgn+=l-4 )); (( _pgn=_pgn>=${#_pg[@]}?${#_pg[@]}-l+4:_pgn )); p r;; u) (( _pgn=_pgn<=l-4?0:_pgn-$l-4 )); p r;; esac; }

intuited · 2009-12-18 23:35:53 10
Watch postgresql calls from your application on localhost

It's certainly not nicely formatted SQL, but you can see the SQL in there...
This is sample output - yours may be different.
1

sudo tcpdump -nnvvXSs 1514 -i lo0 dst port 5432

ethanmiller · 2009-12-18 17:12:44 4
copy working directory and compress it on-the-fly while showing progress

What happens here is we tell tar to create "-c" an archive of all files in current dir "." (recursively) and output the data to stdout "-f -". Next we specify the size "-s" to pv of all files in current dir. The "du -sb . | awk ?{print $1}?" returns number of bytes in current dir, and it gets fed as "-s" parameter to pv. Next we gzip the whole content and output the result to out.tgz file. This way "pv" knows how much data is still left to be processed and shows us that it will take yet another 4 mins 49 secs to finish. Credit: Peteris Krumins http://www.catonmat.net/blog/unix-utilities-pipe-viewer/ Show Sample Output
This is sample output - yours may be different.
```
253MB 0:00:05 [46.7MB/s] [>     ]  1% ETA 0:04:49
```
27

tar -cf - . | pv -s $(du -sb . | awk '{print $1}') | gzip > out.tgz

opertinicy · 2009-12-18 17:09:08 13
Sometimes you just want a quick way to find out if a certain user account is locked [Linux].
This is sample output - yours may be different.
0

getent shadow | grep '^[^:]\+:!' | cut -d: -f1

hackele · 2009-12-18 16:24:01 6
Sometimes you just want a quick way to find out if a certain user account is locked [Linux].

man 5 shadow I think it's more reliable, because passwd -S dont show "locked" but "L" as second field on my Archlinux for a particular user. ( unixhome alternative ).
This is sample output - yours may be different.
0

getent shadow | while IFS=: read a b c; do grep -q '!' <<< "$b" && echo "$a LOCKED" || echo "$a not locked"; done

sputnick · 2009-12-18 15:24:19 4
Sometimes you just want a quick way to find out if a certain user account is locked [Linux].
This is sample output - yours may be different.
0

awk -F":" '{ print $1 }' /etc/passwd | while read UU ; do STATUS=$(passwd -S ${UU} | grep locked 2>/dev/null) ; if [[ ! -z ${STATUS} ]] ; then echo "Account ${UU} is locked." ; fi ; done

unixhome · 2009-12-18 14:28:15 11
scan folder to check syntax error in php files
This is sample output - yours may be different.
5

find . -name "*.php" -exec php -l {} \;

rbawaskar · 2009-12-18 07:33:59 8
Report What Tape is in Autoloader Mailslot (using Barcode Label)

This reports directly using mtx what Tape is in the mailslot (Import/Export tray) on most autoloaders. You will need to change /dev/sg13 to your autloader device file and adjust the 63 at the end to your tape label character length(ie 63 for 8 characters 64 for 9 characters) Show Sample Output
This is sample output - yours may be different.
```
S00009L3
```
0

mtx -f /dev/sg13 status | grep EXPORT | cut -c 56-63

JamesyBoi · 2009-12-18 04:21:51 3
analyze traffic remotely over ssh w/ wireshark

This captures traffic on a remote machine with tshark, sends the raw pcap data over the ssh link, and displays it in wireshark. Hitting ctrl+C will stop the capture and unfortunately close your wireshark window. This can be worked-around by passing -c # to tshark to only capture a certain # of packets, or redirecting the data through a named pipe rather than piping directly from ssh to wireshark. I recommend filtering as much as you can in the tshark command to conserve bandwidth. tshark can be replaced with tcpdump thusly: ssh root@example.com tcpdump -w - 'port !22' | wireshark -k -i -
This is sample output - yours may be different.
31

ssh root@server.com 'tshark -f "port !22" -w -' | wireshark -k -i -

markdrago · 2009-12-17 23:03:24 38
Sniffing network to generate a pcap file in CLI mode on a remote host and open it via local Wireshark ( GUI ).

Then hit ^C to stop, get the file by scp, and you can now use wireshark like this : wireshark /tmp/sniff.pcap If you have tshark on remote host, you could use that : wireshark -k -i <(ssh -l root <REMOTE HOST> tshark -w - not tcp port 22) The last snippet comes from http://wiki.wireshark.org/CaptureSetup/Pipes Show Sample Output
This is sample output - yours may be different.
```
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
265 packets captured
265 packets received by filter
0 packets dropped by kernel
```
6

tcpdump -v -i <INTERFACE> -s 0 -w /tmp/sniff.pcap port <PORT> # On the remote side

sputnick · 2009-12-17 22:08:30 3
count and number lines of output, useful for counting number of matches

If you're on a system that doesn't have nl, you can use cat -n.
This is sample output - yours may be different.
0

ps aux | grep [h]ttpd | cat -n

putnamhill · 2009-12-17 20:45:44 5
Read just the IP address of a device
This is sample output - yours may be different.
1

/sbin/ip -f inet addr | sed -rn 's/.*inet ([^ ]+).*(eth[[:digit:]]*(:[[:digit:]]+)?)/\2 \1/p' | column -t

owen · 2009-12-17 19:48:28 3

count and number lines of output, useful for counting number of matches

Write each FILE to standard output, with line numbers added. With no FILE, or when FILE is -, read standard input. Show Sample Output

ps aux | grep [a]pache2 | nl

donnoman · 2009-12-17 18:48:09 4

Random colours at random locations
This is sample output - yours may be different.
2

p(){ printf "\033[%d;%dH\033[4%dm \033[m" $((RANDOM%LINES+1)) $((RANDOM%COLUMNS+1)) $((RANDOM%8)); }; clear;while :;do p; sleep .001;done

cfajohnson · 2009-12-17 15:25:28 3
Create SSH key exchange from one host to the other

Well its just appending your public key to the remote hosts authorized_keys, but can get messy logging in and out
This is sample output - yours may be different.
0

cat ~/.ssh/id_rsa.pub | ssh <remote_host> "xargs --null echo >> ~/.ssh/authorized_keys"

koushik · 2009-12-17 15:12:11 9
Create sqlite db and store image

Creates a simple sqlite db (img.db) inserts /tmp/Q.jpg on base64 an recorvers it as /tmp/W.jpg
This is sample output - yours may be different.
1

sqlite3 img.db "create table imgs (id INTEGER PRIMARY KEY, img BLOB); insert into imgs (img) values (\"$(base64 -w0 /tmp/Q.jpg)\"); select img from imgs where id=1;" | base64 -d -w0 > /tmp/W.jpg

unixApe · 2009-12-16 20:08:47 3
Altera texto dentro dos arquivos retornados pelo comando 'find' (find and replacing strings on all files in directory)

Esse comando procura por arquivos php que que iniciem com ' Show Sample Output
This is sample output - yours may be different.
```
$
```
-8

find ./wp-content/themes/rotce2009/ -name '*.php' -type f | xargs sed -i 's/<? /<?php /g'

anestesya · 2009-12-16 19:01:12 4
Open a RemoteDesktop from terminal
This is sample output - yours may be different.
-2

rdesktop -a 16 luigi:3052

rduarte · 2009-12-16 17:14:05 3
Save VM running as headless
This is sample output - yours may be different.
-2

VBoxManage controlvm ServidorProducao savestate

rduarte · 2009-12-16 17:12:11 3
Running VirtualBox as headless
This is sample output - yours may be different.
-3

nohup VBoxHeadless -p 3052 -startvm ServidorProducao &

rduarte · 2009-12-16 17:10:30 3
‹ First < 416 417 418 419 420 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Create the signature base string required for a Twitter stream feed

This is the SECOND command in a set for five that are needed for a Twitter stream feed. This command creates variable "b", the so-called "base string" required for oauth in Twitter stream feed requests. (The 256 char limit prevents giving it a better name) We use five environment variables created by a previous step: id, k1, once, ts and k3. The five environment variables are created in a separate command, please see my other commands. For more information on the signature base string, see dev.twitter.com/apps, click on any app (or create a new one) and then go to the "OAuth Tool" tab.

Run skype using your GTK theme

I use this to make skype blend better into my desktop :) --disable-cleanlooks might not be nescessary to achieve the wanted effect.

Function to output an ASCII character given its decimal equivalent

I've corrected the function. My octal conversion formula was completely wrong. Thanks to pgas at http://mywiki.wooledge.org/BashFAQ/071 for setting me straight. The new function is from pgas and is very fast.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

whois surfing my web ?

Searches $PATH for files using grep

Best to put it in a file somewhere in your path. (I call the file spath) #!/bin/bash IFS=:; find $PATH | grep $1 Usage: $ spath php

launch bash without using any letters

I don't know why anyone would use this, I was just messing around tonight and managed to start bash without using any letters and thought I would share. It's pretty simple, first it tries to execute "-" redirecting stderr to stdout which prints the error "bash: -: command not found" to standard output, then I try to execute "bash: -: command not found" which produces the output "bash: bash: -: command not found: command not found". lastly, (on the other side of the semicolon) I use the underscore environment variable which refers to the last command run ("bash: -: command not found") and take out everything after the first ":" character using brace expressions and your left with "bash"

display systemd log entries for sshd using "no-pager" (a bit like in pre-systemd: grep sshd /var/log/messages)

In pre-systemd systems, something like: "# grep sshd /var/log/messages" would display log events in /var/log/messages containing "sshd". # journalctl -u sshd --no-pager The above command displays similar results for systemd systems. (Note that this needs to be run with root permissions to access the log data.)

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Share a 'screen'-session

Ater person A starts his screen-session with `screen`, person B can attach to the srceen of person A with `screen -x`. Good to know, if you need or give support from/to others.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by