All commands sorted by votes

All commands (14,187)

sorted by

I wanted to play a song from the shell and get the shell back, I also dont want to store the file if it is not needed. edit, not sure if I need to mention it... killall vlc to stop it Show Sample Output

-1

wget http://somesite.com/somestream.pls; cvlc somestream.pls&sleep 5; rm somestream.pls*

tomjrace · 2011-08-04 19:24:18 3

Slow down IO heavy process

compare to alternative : - directly tests the -STOP of the process to continue or stop loop, - background operator should be set (or not) at the call of the function For extension i suggest a slowPID() based on kill like above and a slowCMD based on killall.
This is sample output - yours may be different.
-1

slow () { [ -n $1 ] && while kill -STOP $1; do sleep 1; kill -CONT $1; sleep 1; done }

makidoko · 2012-05-16 19:16:50 3
Store mp3 playlist on variable and play with mpg123

On my music directory, I create variable that contains all mp3s files, then I play them with mpg123. -C options enable terminal control key, s for stop, p for pause, f for forward to next song.
This is sample output - yours may be different.
-1

PLAYLIST=$(ls -1) ; mpg123 -C $PLAYLIST

servermanaged · 2009-03-19 17:20:28 12
Get just the IP for a hostname

Get just the IP address for a given hostname. For best results, make this a function in your shell rc file so that it can be used for things like traceroute: Titus:~$ traceroute `getip foo.com` traceroute to 64.94.125.138 (64.94.125.138), 64 hops max, 52 byte packets Show Sample Output
This is sample output - yours may be different.
```
Titus:~$ host foo.com|grep "has address "|cut -d" " -f4
64.94.125.138
```
-1

host foo.com|grep " has address "|cut -d" " -f4

dinomite · 2010-10-29 17:01:37 4
Find a process by name and automatically kill it
This is sample output - yours may be different.
-1

ps aux | grep name | grep -v grep | awk '{print $2}' | xargs kill -9

unixmonkey84604 · 2014-11-11 09:19:24 8
Make a statistic about the lines of code

Have wc work on each file then add up the total with awk; get a 43% speed increase on RHEL over using "-exec cat|wc -l" and a 67% increase on my Ubuntu laptop (this is with 10MB of data in 767 files).
This is sample output - yours may be different.
-1

find . -type f -name '*.c' -exec wc -l {} \; | awk '{sum+=$1} END {print sum}'

arcege · 2009-09-04 15:51:30 6
Static Yubikey 2.2 Password Using Programming Slot 1

By default, slot 1 is used for OTP purposes and validates against the Yubikey servers. Running the command above will replace that. If you have a Yubikey 2 or above, you can change -1 to -2 and program the second slot with a strong static key.
This is sample output - yours may be different.
-1

ykpersonalize -1 -ostatic-ticket -ostrong-pw1 -ostrong-pw2

switchrodeo720 · 2011-05-13 04:00:52 4
IP:PORT to IP:PORT:COUNTRY using geoiplookup

take a list of IP:PORT and output IP:PORT:COUNTRY Show Sample Output
This is sample output - yours may be different.
```
91.191.161.55:35828:Germany
62.212.73.107:54782:Netherlands
83.149.126.84:40972:Netherlands
78.159.112.45:50106:Germany
91.191.166.96:36133:Germany
62.212.73.107:36148:Netherlands
```
-1

for IP in `cat ip.txt|awk -F: '{print $1}'`; do geoiplookup -f /usr/local/share/GeoIP/GeoIP.dat $IP|awk -F, '{print $2}'>>out.txt; done; paste -d ":" ip.txt out.txt>zoom.txt

woben2 · 2011-08-05 09:26:17 3

Traffic stat on ethernet interface

Traffic details on the Ethernet interface. Show Sample Output

-1

ethtool -S eth0

rockon · 2009-03-01 10:25:46 5

Set default "New Page" as HTML in TextMate

When you press "cmd+n" in TextMate, you can have "HTML" language as default document format... You can also define other languages too. You need to know the UUID of your language bundle.
This is sample output - yours may be different.
-1

defaults write com.macromates.textmate OakDefaultLanguage 17994EC8-6B1D-11D9-AC3A-000D93589AF6

vigo · 2009-10-20 07:10:34 4
remove files and directories with acces time older than a given time

Deletes files older than "n" minutes ago. Note the plus sign before the n is important and means "greater than n". This is more precise than atime, since atime is specified in units of days. NOTE that you can use amin/atime, mmin/mtime, and cmin/ctime for access, modification, and change times, respectively. Also, using -delete is faster than piping to xargs, since no piping is needed.
This is sample output - yours may be different.
-1

find -amin +[n] -delete

TeacherTiger · 2009-11-20 17:15:28 4
List your installed Firefox extensions

1.) my profile ends with $USER not with .default 2.) only grep for the first occurrence because some extensions have the translated name also inside the install.rdf Show Sample Output
This is sample output - yours may be different.
```
 grep -hIr -m 1 :name ~/.mozilla/firefox/*.$USER/extensions | tr '<>=' '"""' | cut -f3 -d'"' | sort -u

Adblock Plus
Firebug
It's All Text!
lori (Life-of-request info)
ScrapBook
Secure Login
Session Manager
User Agent Switcher
```
-1

grep -hIr -m 1 :name ~/.mozilla/firefox/*.$USER/extensions | tr '<>=' '"""' | cut -f3 -d'"' | sort -u

new_user · 2010-05-18 14:49:44 5
Quickly check a device in a LVM volume group against multipath

This is an easy way to quickly get a status for a device in multipath on SLES systems, as long as the server is configured based on Novell's standards, where multipathed disks are referred to by /dev/disk/by-... tree. Make sure to replace name_of_vg with your Volume Group name.
This is sample output - yours may be different.
-1

pvscan | awk '/name_of_vg/ {print $2}' | sed 's/[-|/|]/ /g' | cut -d " " -f7

slashdot · 2010-06-22 16:34:42 3
Get just the IP for a hostname
This is sample output - yours may be different.
-1

gethostip -d hostname

ashayh · 2010-10-29 18:54:46 3
Change MySQL Pager For Nicer Output

Instead of dumping the entire query to the screen, it will use 'less -S' to handle pagination. This means you can move back and forward through the result set, and instead of wrapping rows at screen boundaries, the table will extend off the screen, and can be scrolled left and right with arrow keys.
This is sample output - yours may be different.
-1

In MySQL client, \P less -S

maxmanders · 2011-01-19 09:44:43 3
Setup Vim environment for USACO coding

1. Get name of task by task=$(basename "$(pwd)") 2. Check whether "$task.c" exists as a file 3. open "$task.c", "$task.in", "task.out" in vim with such layout. ------------------------------- | | $task.in | | | | |$task.c |-----------------| | | $task.out | | | | -------------------------------
This is sample output - yours may be different.
-1

alias viaco='task="$(basename "$(pwd)")"; if [ -f "$task.c" ]; then vi -c "set mouse=n" -c "set autoread" -c "vsplit $task.out" -c "split $task.in" -c "wincmd l" -c "wincmd H" $task.c; fi'

yolila · 2011-05-13 13:35:02 8
tiny proxy in shell to receive on port and write on unix socket
This is sample output - yours may be different.
-1

mk

adimania · 2014-07-19 18:13:52 7
Partition a new disk as all one partition tagged as "LInux LVM"

This is a bit hacky, but if you're setting up a bunch of new LUNs, it can save a bunch of time. Also check out sfdisk. The fdisk will fail if, for example, a partition table already exists.
This is sample output - yours may be different.
-1

echo -e "n\np\n1\n\n\nt\n8e\nw" | fdisk /dev/sdX

sud0er · 2009-10-20 16:21:54 5
tiny proxy in shell to receive on port and write on unix socket

* Make a FIFO file named replypipe * listen on 1234 * pass the request to unix socket * unix socket will reply to replypipe * replypipe will write reply to the client
This is sample output - yours may be different.
-1

mknod replypipe p; nc -k -lp 1234 < replypipe| nc -U /var/run/mysocket.sock > replypipe

adimania · 2014-07-19 18:17:35 7
rename file to *.old

This command renames the file 'filename' to 'filename.old' using shell expansion. Same as typing "mv filename filename.old".
This is sample output - yours may be different.
-1

mv filename{,.old}

BELzEBUB · 2018-03-08 12:41:18 27
extract links from a google results page saved as a file

From a saved page of google search results, split out all of the links for the results. Useful for creating apache rewrite rules from.
This is sample output - yours may be different.
-1

gsed -e :a -e 's/$<\/[^>]*>$/\1\n/g;s/$<br>$/\1\n/g' page2.txt | sed -n '/<cite>/p;s/<cite>$.*$<\/cite>/\1/g' >> output

shrimphead · 2009-02-06 12:45:20 12
Launch a Java .jar App

Use this to make a launcher for Java apps ( .jar files ) such as with jdownloader
This is sample output - yours may be different.
-1

java -jar /path/to/filename.jar

Bonster · 2011-04-01 05:44:56 15
Randomize lines (opposite of | sort)
This is sample output - yours may be different.
-1

ls -1 | xargs ruby -e'puts ARGV.shuffle'

jacaetevha · 2014-01-17 17:42:08 7
rows2columns

joins multiple lines to create single line with comma separated values. for example if we have an email addresses one per line (copy&paste from spreadsheet) it will oputput one line with comman separated addresses to put it to email client. Show Sample Output
This is sample output - yours may be different.
```
email@number.one, email@number.one, email@number.one, ...
```
-1

perl -le 'print join ", ", map { chomp; $_ } <>'

jozef · 2009-02-06 12:50:43 14
Autofind alive hosts on subnet upon connect

This is helpful if you connect to several networks with different subnets such as 192 networks, 10 networks, etc. Cuts first three octets of ip from ifconfig command and runs nmap ping scan on that subnet. Replace wlan0 with your interface. Assumes class c network, if class b use: cut -d "." -f 1-2 and change nmap command accordingly.
This is sample output - yours may be different.
-1

dhclient wlan0 && sbnt=$(ifconfig wlan0 |grep "inet addr" |cut -d ":" -f 2 | cut -d "." -f 1-3) && nmap $sbnt.0/24 -sP

wltj · 2010-06-22 21:00:29 6
‹ First < 464 465 466 467 468 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Find if the command has an alias

Find usb device in realtime

Using this command you can track a moment when usb device was attached.

Find usb device in realtime

Using this command you can track a moment when usb device was attached.

Matrix Style

I like the fact the Patola's version uses only ones and zeros, but I also like the sparse output of the other versions. This one combines both of those features and eliminates some unnecessary cruft. You can vary the sparseness by changing "$(($RANDOM % 5))" to another number. The number in this term "$(($RANDOM % 4))" controls how frequently the numbers are output bold.

Encryption file in commad line

This will encrypt your single file and create a filename.gpg file. Option: * -c : Encrypt with symmetric cipher To decrypt dhinesh@ubuntu:~$ gpg -c sample.rb.gpg

Lists all listening ports together with the PID of the associated process

This command is more portable than it's cousin netstat. It works well on all the BSDs, GNU/Linux, AIX and Mac OS X. You won't find lsof by default on Solaris or HPUX by default, but packages exist around the web for installation, if needed, and the command works as shown. This is the most portable command I can find that lists listening ports and their associated pid.

processes per user counter

use Linux ;)

extract email adresses from some file (or any other pattern)

This will catch most separators in the section of the email: dot . dash - underscore _ plus + (added for gmail) ... and the basic dash '-' of host names.

Enable programmable bash completion in debian lenny

The really awesome bash completion in debian seems to be an extra package now, which has to be installed. After sourcing /etc/bash_completion it completes almost everything (package names in apt... etc) :-) To make this permanent, put something like this in your .bashrc: if [ -f /etc/bash_completion]; then source /etc/bash_completion fi

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by