Commands using ps sorted by votes

Commands using ps (300)

sorted by

Display the top ten running processes - sorted by memory usage
This is sample output - yours may be different.
5

ps aux --sort -rss | head

unixmonkey42657 · 2012-11-14 17:47:50 9
List docker volumes by container
This is sample output - yours may be different.
5

docker ps -a --format '{{ .ID }}' | xargs -I {} docker inspect -f '{{ .Name }}{{ printf "\n" }}{{ range .Mounts }}{{ printf "\n\t" }}{{ .Type }} {{ if eq .Type "bind" }}{{ .Source }}{{ end }}{{ .Name }} => {{ .Destination }}{{ end }}{{ printf "\n" }}' {}

expelledboy · 2018-10-31 18:20:26 516
connect to X login screen via vnc

the $15 may change for you depending on your distro, etc...
This is sample output - yours may be different.
4

x11vnc -display :0 -auth $(ps -ef|awk '/xauth/ {print $15}'|head -1) -forever -bg &

nottings · 2009-02-19 18:55:54 5
ps a process keeping the header info so you know what the columns of numbers mean!

USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1828 0.0 0.0 5396 476 ? Ss 2008 0:00 /usr/sbin/sshd Show Sample Output
This is sample output - yours may be different.
```
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      1828  0.0  0.0   5396   476 ?        Ss    2008   0:00 /usr/sbin/sshd
```
4

ps auxw |egrep "PID|process_to_look_at"

tsaavik · 2009-02-20 00:17:43 10
Find the processes that are on the runqueue. Processes with a status of

Want to know why your load average is so high? Run this command to see what processes are on the run queue. Runnable processes have a status of "R", and commands waiting on I/O have a status of "D". On some older versions of Linux may require -emo instead of -eo. On Solaris: ps -aefL -o s -o user -o comm | egrep "^O|^R|COMMAND" Show Sample Output
This is sample output - yours may be different.
```
ps -eo stat,pid,user,command | egrep "^STAT|^D|^R"
STAT   PID USER     COMMAND
Rs    9215 oracle   oracleORA1 (LOCAL=NO)
Rs   12090 oracle   oracleORA1 (LOCAL=NO)
Rs   22965 oracle   ora_lmd0_ORA1
R+   26044 root     ps -eo stat,pid,user,command
Rs   29344 oracle   oracleORA1 (LOCAL=NO)
Rs   29352 oracle   oracleORA1 (LOCAL=NO)
```
4

ps -eo stat,pid,user,command | egrep "^STAT|^D|^R"

jyoder · 2009-02-20 19:00:17 7
ensure your ssh tunnel will always be up (add in crontab)

I find it ugly & sexy at the same time isn't it ?
This is sample output - yours may be different.
4

[[ $(COLUMNS=200 ps faux | awk '/grep/ {next} /ssh -N -R 4444/ {i++} END {print i}') ]] || nohup ssh -N -R 4444:localhost:22 user@relay &

j0rn · 2009-03-31 09:39:59 10
Apache memory usage
This is sample output - yours may be different.
4

ps auxf | grep httpd | grep -v grep | grep -v defunct | awk '{sum=sum+$6}; END {print sum/1024}'

empulse · 2009-04-29 17:43:52 32

Format ps command output

ps command gives the possibility to display information with custom formatting with the -o options followed by the format specifier list. Show Sample Output

ps ax -o "%p %U %u %x %c %n"

servermanaged · 2009-07-14 17:21:59 9

How much RAM is Apache using?

Display the amount of memory used by all the httpd processes. Great in case you are being Slashdoted!
This is sample output - yours may be different.
4

ps -o rss -C httpd | tail -n +2 | (sed 's/^/x+=/'; echo x) | bc

ricardoarguello · 2009-07-31 15:15:08 9
Who invoked me? / Get parent command

Get the name of the parent command. This might be helpful, if you need to react on that information. E. g. a script called directly via ssh has got sshd as parent, manually invoked the parent process will probably be bash
This is sample output - yours may be different.
4

ps -o comm= -p $(ps -o ppid= -p $$)

olorin · 2009-08-03 07:41:21 5

Output Detailed Process Tree for any User

An easy function to get a process tree listing (very detailed) for all the processes of any gived user. This function is also in my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html Show Sample Output

psu(){ command ps -Hcl -F S f -u ${1:-$USER}; }

AskApache · 2009-11-13 06:10:33 4

count and number lines of output, useful for counting number of matches

Write each FILE to standard output, with line numbers added. With no FILE, or when FILE is -, read standard input. Show Sample Output

ps aux | grep [a]pache2 | nl

donnoman · 2009-12-17 18:48:09 4

List processes sorted by CPU usage
This is sample output - yours may be different.
4

ps -ef --sort=-%cpu

aguslr · 2011-10-14 21:57:51 3
Print current running shell, PID

works as well as echo $0, but also prints process id, which pts you're using. echo $SHELL doesn't always get updated when changing shells, so this is a better solution than that. Just one more variation on a theme. Show Sample Output
This is sample output - yours may be different.
```
  PID TTY          TIME CMD
28966 pts/9    00:00:00 csh
```
4

ps -p $$

robinsonaarond · 2012-02-09 17:27:45 6
Tells the shell you are using
This is sample output - yours may be different.
4

ps -p $$

maverick · 2013-10-17 10:45:22 9
Show memory usage of all docker / lxc containers
This is sample output - yours may be different.
4

for line in `docker ps | awk '{print $1}' | grep -v CONTAINER`; do docker ps | grep $line | awk '{printf $NF" "}' && echo $(( `cat /sys/fs/cgroup/memory/docker/$line*/memory.usage_in_bytes` / 1024 / 1024 ))MB ; done

sammcj · 2014-09-24 04:37:01 10
get ip of all running docker containers

pretty self explanitory
This is sample output - yours may be different.
4

docker inspect --format "{{ .NetworkSettings.IPAddress }}" $(docker ps -q)

dckr · 2015-11-20 01:55:53 10
total percentage of memory use for all processes with a given name

This command will add up RAM usage of all processes whose name contains "java" and output the sum of percentages in HRF. Also, unlike the original #15430, it wont fail on processes with a usage of >9.9%. Pleases note that this command wont work reliably in use cases where a significant portion of processes involved are using less than 0.1% of RAM, because they will be counted as "0", even though a great number of them could add up to significant amounts. Show Sample Output
This is sample output - yours may be different.
```
43.5 % of RAM
```
4

ps -eo pmem,comm | grep java | awk '{sum+=$1} END {print sum " % of RAM"}'

bugmenot · 2016-02-10 09:00:56 16
Pulls total current memory usage, including SWAP being used, by all active processes.
This is sample output - yours may be different.
3

ps aux | awk '{sum+=$6} END {print sum/1024}'

darkon1365 · 2009-02-16 12:10:00 142
Current running process ordered by %CPU

Useful to detect which process is causing system loads. It shows process PID so as we can take further actions. Show Sample Output
This is sample output - yours may be different.
```
0.8 25686 gnome-terminal
 1.3 23966 /usr/lib/thunderbird/thunderbird-bin
35.9  6638 /usr/lib/firefox-3.0.6/firefox
```
3

ps -eo pcpu,pid,args | sort -n

unixmonkey1055 · 2009-02-16 14:23:03 154
Kill all processes belonging to a user

This is a 'killall' command equivalent where it is not available. Prior to executing it, set the environment variable USERNAME to the username, whose processes you want to kill or replace the username with the $USERNAME on the command above. Side effect: If any processes from other users, are running with a parameter of $USERNAME, they will be killed as well (assuming you are running this as root user) [-9] in square brackets at the end of the command is optional and strongly suggested to be your last resort. I do not like to use it as the killed process leaves a lot of mess behind.
This is sample output - yours may be different.
3

ps -ef | grep $USERNAME | awk {'print $2'} | xargs kill [-9]

TheNomad · 2009-02-17 20:35:35 9
Check ps output to see if file is running, if not start it

This comes in handy if you have daemons/programs that have potential issues and stop/disappear, etc., can be run in cron to ensure that a program remains up no matter what. Be advised though, if a program did core out, you'd likely want to know why (gdb) so use with caution on production machines.
This is sample output - yours may be different.
3

ps -C thisdaemon || { thisdaemon & }

sil · 2009-02-18 14:12:17 6
Show the 20 most CPU/Memory hungry processes

This command will show the 20 processes using the most CPU time (hungriest at the bottom). You can see the 20 most memory intensive processes (hungriest at the bottom) by running: ps aux | sort +3n | tail -20 Or, run both: echo "CPU:" && ps aux | sort +2n | tail -20 && echo "Memory:" && ps aux | sort +3n | tail -20
This is sample output - yours may be different.
3

ps aux | sort +2n | tail -20

dopeman · 2009-03-31 12:03:34 10
Return threads count of a process

Source: http://superuser.com/questions/49408/how-do-i-monitor-or-view-the-thread-count-of-a-certain-process-on-aix Show Sample Output
This is sample output - yours may be different.
```
THCNT
   2
```
3

ps -o thcount -p <process id>

lukasz · 2009-12-04 14:39:53 4
Pull Total Memory Usage In Virtual Environment

This command basically adds up all of the individual instances processes and gives you a grand total for used memory in that instance alone.
This is sample output - yours may be different.
3

ps axo rss,comm | awk '{sum+=$1; print $1/1024, "MB - ", $2} END {print "\nTotal RAM Used: ", sum/1024, "MB\n"}'

johnss · 2010-02-18 12:05:45 7
< 1 2 3 4 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Find out my Linux distribution name and version

prints the parameter you used on the previous command

access to last touched or created file with arrow_up_key immediately after displaying the file list

Display recursive file list (newest file displayed at the end) and be free to access last file in the list simply by pressing arrow_up_key i.e. open it with joe editor. BTW IMHO the list of files with newest files at the end is often more informative. Put this 'lsa' function somewhere in your .bashrc and issue $ . ~/.bashrc or $ source ~/.bashrc to have access to the 'lsa' command immediately. . (the function appends command "joe last_file_in_the_list" at the end of command history)

Benchmark SQL Query

Benchmark a SQL query against MySQL Server. The example runs the query 10 times, and you get the average runtime in the output. To ensure that the query does not get cached, use `RESET QUERY CACHE;` on top in the query file.

convert a pdf to jpeg

Converts a .pdf to .jpg . should work with jpeg | tiff | png | gif | jp2 | pict | bmp | qtif | psd | sgi | tga

another tweet function

This version of tweet() doesn't require you to put quotes around the body of your tweet... it also prompts you for password. It will still barf on a '!' character.

Rename files in batch

Join flv files

Download entire website

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using ps

Commands using ps (300) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using ps (300)

sorted by