Commands tagged vim sorted by votes

Commands tagged vim (143)

sorted by

use vim to get colorful diff output
This is sample output - yours may be different.
-1

vimdiff file1 file2

slappy · 2012-08-24 14:58:37 4
Open files in tabs with vim

Open files in tabs
This is sample output - yours may be different.
-2

vim -p file1 file2 [...]

richard · 2010-04-15 11:40:19 3
Open file with sudo when there is no write-permission

this avoids several VIM warnings, which I seem too stupid to disable: warning, readonly! and: file and buffer have changed, reload?!
This is sample output - yours may be different.
-2

if test -w $1; then vim $1; else sudo vim $1; fi

srepmub · 2010-08-14 13:28:32 4
VIM subst any char different from literal

In case the line you want to join start with a char different than ", you may use \n.*"\n as regex.
This is sample output - yours may be different.
-2

:g/\n"/jo

mensa13 · 2010-09-11 18:51:41 3
Replace spaces with tabs & format file source recursuvely within a directory

The sample command searches for PHP files replacing tabs with spaces. -u NONE # don't use vimrc Instead of retab! one may pass retab! 4 for instance. Look at this http://susepaste.org/69028693 also
This is sample output - yours may be different.
-2

find $DIR -name *.php -exec vim -u NONE -c 'set ft=php' -c 'set shiftwidth=4' -c 'set tabstop=4' -c 'set noexpandtab!' -c 'set noet' -c 'retab!' -c 'bufdo! "execute normal gg=G"' -c wq {} \;

ruslan · 2011-04-08 11:42:45 4
substitute in each buffer in the buffer list
This is sample output - yours may be different.
-2

:bufdo %s/foo/bar/ge | up

kev · 2011-06-10 05:57:32 4
Delete all empty lines from a file with vim

Here's the other way of doing it in vim: setting a recursive macro. 'gg' brings you to the top of the buffer, 'qqq' clears the 'q' macro, 'qq' starts recording a macro called 'q', '/^$' moves the cursor to the next empty line, 'dd' deletes the line that the cursor is on, '@q' calls the 'q' macro (currently empty because of 'qqq'), and 'q' stops recording the macro. '@q' calls the macro. It will run until it cannot find another blank line, at which point it will throw up an error and cease. While this is longer than the regex, you can use it without having to move your thoughts from 'vim-mode' to 'regex-mode'.
This is sample output - yours may be different.
-2

ggqqqqq/^$dd@qq@q

evilsoup · 2013-08-16 20:37:44 8
Edit a file using vi or vim in read-only mode

The -R flag prevents you from making changes to a file, useful when you only want to view the file. This command is nicer than the 'more' or 'less' commands because for source codes, vi shows syntax highlight.
This is sample output - yours may be different.
-3

vi -R filename

haivu · 2009-03-04 06:56:40 10
Open file with sudo when there is no write-permission

Like the http://www.commandlinefu.com/commands/view/6327/open-file-with-sudo-when-there-is-no-write-permission, but works (in zsh; my commandlinefu is not strong enough to understand why bash don't like it) with vim options, like -O, and many input files. There could be other mistakes.
This is sample output - yours may be different.
-3

vi2() {for i in $@; do [ -f "$i" ] && [ ! -w "$i" ] && sudo vim $@ && return; done; vim $@}

pipeliner · 2010-08-15 10:00:14 3
open two files in vim
This is sample output - yours may be different.
-3

vim file1 file2

bossNova · 2012-09-06 21:48:12 4
Paste what you previously wrote in INSERT MODE

Paste what you previously wrote in INSERT MODE, for example: 1. Write 'foo' in INSERT MODE 2. Return to NORMAL MODE 3. Press "." and it will paste 'foo'
This is sample output - yours may be different.
-3

. (in NORMAL MODE)

Zulu · 2013-01-08 18:32:57 4
Emptying a text file in one shot in VIM
This is sample output - yours may be different.
-4

:!>test.txt

amaymon · 2009-08-19 13:45:23 4
vim display hex value char under cursor
This is sample output - yours may be different.
-5

ga

miccaman · 2009-06-19 12:20:10 5
Remove VIM temp files

Assuming only VIM has *~ files in your current dir. If you have usefull data in a file named in the *~ pattern, DO NOT RUN this command!
This is sample output - yours may be different.
-5

find . -name "*~" -exec rm {} \;

ivanatora · 2010-02-26 10:54:02 7
Go to a specified line in a file
This is sample output - yours may be different.
-5

vim +143 filename.txt

techie · 2013-05-09 08:24:28 6
Search for the file and open in vi editor.
This is sample output - yours may be different.
-7

vifind() { vi `find . -name "$1"` }

deepanaidu · 2009-03-06 05:52:48 7
Save a file you edited in vim without the needed permissions

shorthand for sudo save
This is sample output - yours may be different.
-7

:w!

ecto · 2011-11-20 22:55:45 3
Open a file using vim in read only (like less)
This is sample output - yours may be different.
-9

vim -R /etc/passwd

techie · 2013-05-09 08:28:32 6
‹ First < 4 5 6

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

tmux start new session with title and execute command

in this examp start htop command in tmux session over the shell cosole and set title for the tmux without doing it manuelly in tmux

encrypt whole line with ROT13 in vim

list block devices

Shows all block devices in a tree with descruptions of what they are.

Determine what an process is actually doing

Find the package that installed a command

diff the same file in two directories.

This is useful when you're diffing two files of the same name in radically different directory trees. For example: Set $ path1='/some/long/convoluted/path/to/all/of/your/source/from/a/long/dead/machine' then $ path2='/local/version/of/same/file' then run the command. Much easier on the eyes when you're looking back across your command history, especially if you're doing the same diff over and over again.

Temporarily suspend and unsuspend a foreground job

Press ^Z, do what you need to do on the shell, then input % to resurrect the suspended job.

tar the current directory wihtout the absolute path

tars the current directory (and its children) in an archive of the same name (plus ".tar" :)) in the parent directory without the absolute path, so that when the archive is extracted, only the current directory name is created for the path. Assumes bash/zsh.

LIST FILENAMES OF FILES CREATED TODAY IN CURRENT DIRECTORY

Then pipe to 'xargs ls' for a familiar listing, possibly using find's -print0 and xarg's -0 options.

Apply, in parallel, a bc expression to CSV

Define a function that applies bc, the *nix calculator, with the specified expression to all rows of the input CSV. The first column is mapped to {1}, second one to {2}, and so forth. See sample output for an example. This function uses all available cores thanks to GNU Parallel. Requires GNU Parallel

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands tagged vim

Commands tagged vim (143) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands tagged vim (143)

sorted by