Commands using alias sorted by votes

Commands using alias (240)

sorted by

View the newest xkcd comic.

Add an alias to your .bashrc that allows you to issue the command xkcd to view (with gwenview) the newest xkcd comic... I know there are thousands of them out there but this one is at least replete with installer and also uses a more concise syntax... plus, gwenview shows you the downloading progress as it downloads the comic and gives you a more full featured viewing experience.
This is sample output - yours may be different.
-5

echo alias xkcd="gwenview `w3m -dump http://xkcd.com/|grep png | awk '{print $5}'` 2> /dev/null" >> .bashrc

GinoMan2440 · 2010-01-30 20:38:16 5
Quick setup to list all directory contents by time reversed sort... most recent change last.

Create an alias to list all contents of the current directory in "reverse" time order. Thus the last modified file will appear just above your next prompt. Useful for remembering where you left off modifying files in a folder or just noting recent changes. csh format but bash syntax similar
This is sample output - yours may be different.
-5

alias ltr 'ls -altr'

drb532 · 2011-06-11 03:22:13 5
Wordpress - download latest, extract, and rename config file.
This is sample output - yours may be different.
-6

alias wordpress='mkdir wordpress && cd wordpress && wget http://wordpress.org/latest.tar.gz && tar -xvzf latest.tar.gz && mv wordpress/* . && rm -rf latest.tar.gz wordpress && cp wp-config-sample.php wp-config.php'

ahabman · 2009-02-26 03:23:18 6
alias to list hidden files of a folder
This is sample output - yours may be different.
-6

alias lh='ls -a | egrep "^\."'

fabs · 2009-03-05 20:36:58 11
Shorthand to install package in Ubuntu

I put this line in my ~/.bashrc file (which I source via ~/.bash_profile). Now, when I need to install a package, I typed *install* instead of the longer version.
This is sample output - yours may be different.
-6

alias install='sudo apt-get install'

haivu · 2011-10-27 19:53:01 26
it's an alias to summon the command history only for lazy people well for busy too

typing history it's a long way but typing only h it's my way it works in whatever distro or OSes or shells that you use, you know, only for easyness :) Show Sample Output
This is sample output - yours may be different.
```
............
  448  df
  449  ./wlan111
  450  mc
  451  htop
  452  history
  453  activate modulos/wine-1.1.6.lzm
  454  wine POV-Ray/bin/pvengine.exe
  455  df
  456  umount /mnt/myfs
  457  xfs_repair /dev/loop/24
  458  umount /mnt/myfs1
  459  xfs_repair /dev/loop/25
  460  dmesg
  ...........
```
-8

alias h='history'

ximo88 · 2009-04-28 11:20:03 4
Various git commands

g clone --local --bare . /repo.git g remote add alias /repo.git g push alias branch g log -p filename g checkout SHA1_rev g reset --hard g checkout -b new_branch g ls-files --deleted Show Sample Output
This is sample output - yours may be different.
```
g clone --local --bare . /repo.git
g remote add alias /repo.git
g push alias branch

g log -p filename

g checkout SHA1_rev
g reset --hard
g checkout -b new_branch

g ls-files --deleted
```
-8

alias g='git'

evandrix · 2012-08-31 05:12:56 4

Tell us quantities of disk usage memory and swap used in a moment done

A short way to give us relevant report in a moment done about quantities on disk usage, memory and swap in our Linux Systems. Show Sample Output

-9

alias dfr='df;free'

ximo88 · 2009-04-28 11:30:31 17

Brings you back to previous directory
This is sample output - yours may be different.
-9

alias b='cd -'

P17 · 2009-05-05 16:21:22 6
Short alias for sudo

This is way faster than typing 'sudo'. And AFAIK - there is no decent command for letter 's'.
This is sample output - yours may be different.
-12

alias s='sudo'

eimantas · 2010-04-17 11:30:55 9
up - aliaes for moving up the directory tree
This is sample output - yours may be different.
-16

alias up="cd .."; alias upp="cd ../.."; alias uppp="cd ../../.."; alias upppp="cd ../../../.."; alias uppppp="cd ../../../../.."

swmcd · 2009-03-30 03:27:21 9
alias vi to emacs

add (server-start) in .emacs
This is sample output - yours may be different.
-18

alias vi='emacsclient -n'

freestyler · 2009-07-29 06:18:40 5
alias source .bashrc and nano .bashrc

alias for editing .bashrc and sourcing it with a quick command, very useful for quickly adding and modifying alias' and functions in bashrc, create lots of alias from commandlinefu very quickly, use nano vim or any other edit if you want, very useful if you have a barcode scanner and you want to run commands quickly with barcodes Show Sample Output
This is sample output - yours may be different.
```
usage:
$ nbrc
edit .bashrc
press ctrl-x,y,enter
$ sbrc
```
-19

alias sbrc="source ~/.bashrc" && alias nbrc="nano ~/.bashrc"

professoralex · 2009-05-13 02:41:37 11
Ultra shortcut for ssh root@

When you have to manage lot of servers, it's boring to type ssh root@myhost for each connection. Now you can type juste "s someting" and you are connected. You can too add bash_completion script to complet with tab the name of your servers. This will be the next tips from me ;) Show Sample Output
This is sample output - yours may be different.
```
user@localhost:~$ s myhost
Last login: Mon May  4 15:16:18 2009 from 10.40.29.72
[root@myhost ~]#
```
-20

alias s='ssh -l root'

GouNiNi · 2009-05-07 15:57:12 11
move you up one directory quickly
This is sample output - yours may be different.
-21

alias ..='cd ..'

kev · 2011-10-28 10:12:57 11
‹ First < 8 9 10

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Alias HEAD for automatic smart output

Run the alias command, then issue $ps aux | head and resize your terminal window (putty/console/hyperterm/xterm/etc) then issue the same command and you'll understand. $ ${LINES:-`tput lines 2>/dev/null||echo -n 12`} Insructs the shell that if LINES is not set or null to use the output from `tput lines` ( ncurses based terminal access ) to get the number of lines in your terminal. But furthermore, in case that doesn't work either, it will default to using the deafault of 12 (-2 = 10). The default for HEAD is to output the first 10 lines, this alias changes the default to output the first x lines instead, where x is the number of lines currently displayed on your terminal - 2. The -2 is there so that the top line displayed is the command you ran that used HEAD, ie the prompt. Depending on whether your PS1 and/or PROMPT_COMMAND output more than 1 line (mine is 3) you will want to increase from -2. So with my prompt being the following, I need -7, or - 5 if I only want to display the commandline at the top. ( https://www.askapache.com/linux/bash-power-prompt/ ) 275MB/748MB [7995:7993 - 0:186] 06:26:49 Thu Apr 08 [askapache@n1-backbone5:/dev/pts/0 +1] ~ $ In most shells the LINES variable is created automatically at login and updated when the terminal is resized (28 linux, 23/20 others for SIGWINCH) to contain the number of vertical lines that can fit in your terminal window. Because the alias doesn't hard-code the current LINES but relys on the $LINES variable, this is a dynamic alias that will always work on a tty device.

Getting ESP and EIP addresses from running processes

'ps' let you specify the format that you want to see on the output.

Open Remote Desktop (RDP) from command line and connect local resources

The above command will open a Remote Desktop connection from command line, authenticate using default username and password (great for virtual machines; in the exampe above it's administrator:password), create a shared folder between your machine and the other machine and configure resolution to best fit your desktop (I don't like full screen because it make the desktop panels to disappear). The command will run in the background, and expect to receive parameters. You should enter hostname or IP address as a parameter to the command, and can also override the defaults parameters with your own.

chroot, bind mount without root privilege/setup

PRoot is a user-space implementation of chroot, mount --bind, and binfmt_misc. This means that users don't need any privileges or setup to do things like using an arbitrary directory as the new root filesystem, making files accessible somewhere else in the filesystem hierarchy, or executing programs built for another CPU architecture transparently through QEMU user-mode. Also, developers can use PRoot as a generic Linux process instrumentation engine thanks to its extension mechanism, see CARE for an example. Technically PRoot relies on ptrace, an unprivileged system-call available in every Linux kernel. https://github.com/cedric-vincent/PRoot

Expand shortened URLs

This relies on a public API from http://longurl.org. So, this has the weakness that if the service disappears, the function will break. However, it has the advantage that the shortened URL service will not be tracking your IP address and other metrics, but instead will track longurl.org. Thus, you can remain anonymous from the shortened URL services (although not anonymous from longurl.org). It does no sanity checking that you have provided an argument. If you do not provide one, "message" is displayed to STDOUT.

Show current iptables rules, with line numbers

list files in 'hitlar' mode

Was playing with the shell. It struck to me, just by rearranging the parameters, i was able to remember what they did and in a cool way. Enter the 'hitlar' mode. bash-3.2$ ls -hitlar Shows all items with inodes, in list view, human readable size, sorted by modification time in reverse, bash-3.2$ ls -Fhitlar Shows the same with classification info. Add the hitlar mode alias to your .bashrc. bash-3.2$ echo "alias hitlar='ls -Fhitlar'" >> ~/.bashrc bash-3.2$ hitlar bash-3.2$ hitlar filename

Restore mysql database uncompressing on the fly.

This way you keep the file compressed saving disk space. Other way less optimal using named pipes: mysql -uroot -p'passwd' database <

output list of modifications for an svn revision

url can be a working copy or url to a svn repository, revision is any valid revision number for that branch.

SSH Copy ed25519 key into your host

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using alias

Commands using alias (240) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using alias (240)

sorted by