Commands using awk sorted by votes

Commands using awk (1,418)

sorted by

netstat -p recoded (totaly useless..)

Ok so it's rellay useless line and I sorry for that, furthermore that's nothing optimized at all... At the beginning I didn't managed by using netstat -p to print out which process was handling that open port 4444, I realize at the end I was not root and security restrictions applied ;p It's nevertheless a (good ?) way to see how ps(tree) works, as it acts exactly the same way by reading in /proc So for a specific port, this line returns the calling command line of every thread that handle the associated socket
This is sample output - yours may be different.
-5

p=$(netstat -nate 2>/dev/null | awk '/LISTEN/ {gsub (/.*:/, "", $4); if ($4 == "4444") {print $8}}'); for i in $(ls /proc/|grep "^[1-9]"); do [[ $(ls -l /proc/$i/fd/|grep socket|sed -e 's|.*\[$.*$\]|\1|'|grep $p) ]] && cat /proc/$i/cmdline && echo; done

j0rn · 2009-04-30 12:39:48 630
Kill a daemon by name, not by PID

Just find out the daemon with $ netstat -atulpe. Then type in his name and he gets the SIGTERM.
This is sample output - yours may be different.
-5

kill_daemon() { echo "Daemon?"; read dm; kill -15 $(netstat -atulpe | grep $dm | cut -d '/' -f1 | awk '{print $9}') }; alias kd='kill_daemon

P17 · 2009-05-26 20:39:56 7
To print a specific line from a file

I don't know if it's better but works fine :)
This is sample output - yours may be different.
-5

awk '{if (NR == 3) print}' <file>

yooreck · 2009-10-19 15:58:09 5
search for and kill a process in one blow
This is sample output - yours may be different.
-5

ps aux|grep -i [p]rocessname|awk '{ print $2 }'|xargs kill

billcarroll · 2010-04-10 18:42:27 17
How many lines does the passwd file have?
This is sample output - yours may be different.
-5

awk 'END {print NR}' /etc/passwd

Leo_Gutierrez · 2011-06-23 00:33:40 3
Print only the odd lines of a file
This is sample output - yours may be different.
-6

awk '{if (NR % 2 == 1) print $0}' file.txt

twopoint718 · 2009-02-05 18:43:19 24
Check if Fail2Ban is Running

Check if Fail2Ban is running on the system and alert it with a message in the terminal Show Sample Output
This is sample output - yours may be different.
```
[INFO] Fail2Ban is not running

or:

[INFO] Fail2Ban is running and the PID is 3557
```
-6

FAIL2BAN=`ps ax | grep fail2ban | grep -v grep | awk {'print $1'}` && if [ -n "$FAIL2BAN" ]; then printf "\n[INFO] Fail2Ban is running and the PID is %s\n\n" $FAIL2BAN; else printf "\n [INFO] Fail2Ban is not running\n\n"; fi

fmdlc · 2009-02-11 04:36:49 8
kill some pids without specific pid

search_criteria = what do you want to kill pid = pid of you dont kill
This is sample output - yours may be different.
-6

kill -9 `ps aux | grep "search_criteria" | awk '{if ($2 != pid) print $2}'`

ozgurkuru · 2010-09-16 08:52:59 6
Kill any process with one command using program name

Removed unneeded grep -v by making the initial grep unable to match itself.
This is sample output - yours may be different.
-6

ps -ef | grep [j]boss | awk '{print $2}'|xargs kill -9

utoxin · 2010-09-30 15:55:41 3
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-6

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:46 4
ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}
This is sample output - yours may be different.
-6

ps -ef | grep PROCESS | grep -v grep | awk '{system "kill -9" $2}

pepin · 2015-03-21 21:25:07 11
This is a nice way to kill processes.. the example below is for firefox!!! substitute firefox for whatever the process name is...

This is a nice way to kill processes.. the example here is for firefox!!! substitute firefox for whatever the process name is... Show Sample Output
This is sample output - yours may be different.
```
kill -9 7491 
kill -9 7506 
kill -9 7434 
kill -9 7532
```
-7

ps aux | grep -i firefox | grep -v grep | awk '{print $2}' | xargs -t -i kill -9 {}

blackdude · 2009-02-19 18:50:00 11
kill all instances of an annoying or endless, thread-spawning process
This is sample output - yours may be different.
-7

ps auxwww | grep outofcontrolprocess | awk '{print $9}' | xargs kill -9

fpater · 2009-02-20 21:49:38 6
Kill all processes matching a given name

This command kills all processes with 'SomeCommand' in the process name. There are other more elegant ways to extract the process names from ps but they are hard to remember and not portable across platforms. Use this command with caution as you could accidentally kill other matching processes! xargs is particularly handy in this case because it makes it easy to feed the process IDs to kill and it also ensures that you don't try to feed too many PIDs to kill at once and overflow the command-line buffer. Note that if you are attempting to kill many thousands of runaway processes at once you should use 'kill -9'. Otherwise the system will try to bring each process into memory before killing it and you could run out of memory. Typically when you want to kill many processes at once it is because you are already in a low memory situation so if you don't 'kill -9' you will make things worse
This is sample output - yours may be different.
-7

ps axww | grep SomeCommand | awk '{ print $1 }' | xargs kill

philiph · 2009-02-28 17:48:51 11
Pretty print output of

Show Sample Output
This is sample output - yours may be different.
```
1:
root
3410
00:00:00
gpm -m /dev/input/mice -t exps2

2:
root
3424
00:00:00
crond

3:
root
3488
00:00:00
/usr/sbin/atd
```
-8

ps -ef | awk -v OFS="\n" '{ for (i=8;i<=NF;i++) line = (line ? line FS : "") $i; print NR ":", $1, $2, $7, line, ""; line = "" }'

djangofan · 2012-12-04 15:59:53 9
send Everyone on your machine some love

This works just like write or wall ... cept one thing the sender is anonymous ... if you really want to drive everyone insane replace echo \"The Matrix has you...\" with cat /dev/urandom nice one to do on April fool's day Show Sample Output
This is sample output - yours may be different.
```
The Matrix has you... (on all writable ttys)
```
-12

w | egrep -v '(load|FROM)' | awk '{print $2}' | sed 's/^/tty/' | awk '{print "echo \"The Matrix has you...\" >> /dev/" $1}' | bash

copremesis · 2009-04-29 22:04:56 10
get LAN ip

get the ip address on your LAN Show Sample Output
This is sample output - yours may be different.
```
192.168.1.102
```
-12

ifconfig |grep broadcast | awk '{print $2}'

fotoflo · 2012-12-05 03:57:51 9
for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done
This is sample output - yours may be different.
-14

for i in $(grep 'mystring' myfile1)|awk '{print $1}'); do grep $1 myfile2;done

msh · 2011-03-15 16:18:29 5
‹ First < 55 56 57

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Find dupe files by checking md5sum

Add timestamp to history

History usually only gives the command number and the command. This will add a timestamp to the history file. Note: this will only put the correct timestamp on commands used after the export is done. You may want to put this in your .bashrc

Find artist and title of a music cd, UPC code given (first result only)

I like curl better than wget, I just think that curl -s is a lot simpler than wget ... see I forget what you even have to do to get wget to pipe it's output Anyway, all in one sed command as "requested"

Sort on multiple dis-contiguous keys/fields (can even specify key number/field from the end)

Notes: 1) -n-1 means sort key is the last field 2) -l is important if each separate record is on a new line (usually so for text files) 3) -j tells msort not to create log file (msort.log) in the working directory 4) may need to install msort package. 5) msort does lot more. Check man msort

scroll file one line at a time (w/only UNIX base utilities)

usage examples ls largedir |rd lynx -dump largewebsite.com |rd rd < largelogfile

Display connections histogram

Displays a connection histogram of active tcp connections. Works even better under an alias. Thanks @Areis1 for sharing this one.

Extract busiest times from apache access log

Analyze an Apache access log for the time period with most activity and display the hit count, requesting IP and the timestamp. May help detect a brute force dos attack.

List upgrade-able packages on Ubuntu

Taken from apticron and modified.

Check whether IPv6 is enabled

Checks whether IPv6 is enabled system-wide by reading from procfs.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using awk

Commands using awk (1,418) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using awk (1,418)

sorted by