Commands tagged vim sorted by votes

Commands tagged vim (143)

sorted by

use vim to get colorful diff output
This is sample output - yours may be different.
-1

vimdiff file1 file2

slappy · 2012-08-24 14:58:37 4
Open files in tabs with vim

Open files in tabs
This is sample output - yours may be different.
-2

vim -p file1 file2 [...]

richard · 2010-04-15 11:40:19 3
Open file with sudo when there is no write-permission

this avoids several VIM warnings, which I seem too stupid to disable: warning, readonly! and: file and buffer have changed, reload?!
This is sample output - yours may be different.
-2

if test -w $1; then vim $1; else sudo vim $1; fi

srepmub · 2010-08-14 13:28:32 4
VIM subst any char different from literal

In case the line you want to join start with a char different than ", you may use \n.*"\n as regex.
This is sample output - yours may be different.
-2

:g/\n"/jo

mensa13 · 2010-09-11 18:51:41 3
Replace spaces with tabs & format file source recursuvely within a directory

The sample command searches for PHP files replacing tabs with spaces. -u NONE # don't use vimrc Instead of retab! one may pass retab! 4 for instance. Look at this http://susepaste.org/69028693 also
This is sample output - yours may be different.
-2

find $DIR -name *.php -exec vim -u NONE -c 'set ft=php' -c 'set shiftwidth=4' -c 'set tabstop=4' -c 'set noexpandtab!' -c 'set noet' -c 'retab!' -c 'bufdo! "execute normal gg=G"' -c wq {} \;

ruslan · 2011-04-08 11:42:45 4
substitute in each buffer in the buffer list
This is sample output - yours may be different.
-2

:bufdo %s/foo/bar/ge | up

kev · 2011-06-10 05:57:32 4
Delete all empty lines from a file with vim

Here's the other way of doing it in vim: setting a recursive macro. 'gg' brings you to the top of the buffer, 'qqq' clears the 'q' macro, 'qq' starts recording a macro called 'q', '/^$' moves the cursor to the next empty line, 'dd' deletes the line that the cursor is on, '@q' calls the 'q' macro (currently empty because of 'qqq'), and 'q' stops recording the macro. '@q' calls the macro. It will run until it cannot find another blank line, at which point it will throw up an error and cease. While this is longer than the regex, you can use it without having to move your thoughts from 'vim-mode' to 'regex-mode'.
This is sample output - yours may be different.
-2

ggqqqqq/^$dd@qq@q

evilsoup · 2013-08-16 20:37:44 8
Edit a file using vi or vim in read-only mode

The -R flag prevents you from making changes to a file, useful when you only want to view the file. This command is nicer than the 'more' or 'less' commands because for source codes, vi shows syntax highlight.
This is sample output - yours may be different.
-3

vi -R filename

haivu · 2009-03-04 06:56:40 10
Open file with sudo when there is no write-permission

Like the http://www.commandlinefu.com/commands/view/6327/open-file-with-sudo-when-there-is-no-write-permission, but works (in zsh; my commandlinefu is not strong enough to understand why bash don't like it) with vim options, like -O, and many input files. There could be other mistakes.
This is sample output - yours may be different.
-3

vi2() {for i in $@; do [ -f "$i" ] && [ ! -w "$i" ] && sudo vim $@ && return; done; vim $@}

pipeliner · 2010-08-15 10:00:14 3
open two files in vim
This is sample output - yours may be different.
-3

vim file1 file2

bossNova · 2012-09-06 21:48:12 4
Paste what you previously wrote in INSERT MODE

Paste what you previously wrote in INSERT MODE, for example: 1. Write 'foo' in INSERT MODE 2. Return to NORMAL MODE 3. Press "." and it will paste 'foo'
This is sample output - yours may be different.
-3

. (in NORMAL MODE)

Zulu · 2013-01-08 18:32:57 4
Emptying a text file in one shot in VIM
This is sample output - yours may be different.
-4

:!>test.txt

amaymon · 2009-08-19 13:45:23 4
vim display hex value char under cursor
This is sample output - yours may be different.
-5

ga

miccaman · 2009-06-19 12:20:10 5
Remove VIM temp files

Assuming only VIM has *~ files in your current dir. If you have usefull data in a file named in the *~ pattern, DO NOT RUN this command!
This is sample output - yours may be different.
-5

find . -name "*~" -exec rm {} \;

ivanatora · 2010-02-26 10:54:02 7
Go to a specified line in a file
This is sample output - yours may be different.
-5

vim +143 filename.txt

techie · 2013-05-09 08:24:28 6
Search for the file and open in vi editor.
This is sample output - yours may be different.
-7

vifind() { vi `find . -name "$1"` }

deepanaidu · 2009-03-06 05:52:48 7
Save a file you edited in vim without the needed permissions

shorthand for sudo save
This is sample output - yours may be different.
-7

:w!

ecto · 2011-11-20 22:55:45 3
Open a file using vim in read only (like less)
This is sample output - yours may be different.
-9

vim -R /etc/passwd

techie · 2013-05-09 08:28:32 6
‹ First < 4 5 6

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Colorized JSON pretty printing

Uses pygmentize and python to create indented and colorized JSON output

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Emulate tail using awk.

This awk codes emulates tail. For efficiency it uses a circular array, which stores only N number of records. Using awk gives the flexibility of modifying the output as needed, for example adding the record number (NR) at the output and much more.

Compute the average number of KB per file for each dir

Shorter version using --tag

invoke MATLAB functions from command line

`-r script.m` also possible

a function to find the fastest DNS server

http://public-dns.info gives a list of online dns servers. you need to change the country in url (br in this url) with your country code. this command need some time to ping all IP in list.

list unique file extensions recursively for a path, include extension frequency stats

Get the longest match of file extension (Ex. For 'foo.tar.gz', you get '.tar.gz' instead of '.gz')

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

List docker volumes by container

Testing hard disk writing speed

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands tagged vim

Commands tagged vim (143) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands tagged vim (143)

sorted by