Commands using tail sorted by votes

Commands using tail (292)

sorted by

Get the IP address

more variety
This is sample output - yours may be different.
0

ifconfig | grep "inet" | tail -1 | awk '{print $2}'

wotan · 2012-07-13 01:27:59 3
Short Information about loaded kernel modules
This is sample output - yours may be different.
0

lsmod | tail -n +2 | cut -d' ' -f1 | xargs modinfo | egrep '^file|^desc|^dep' | sed -e'/^dep/s/$/\n/g'

vlaad · 2012-09-03 17:59:49 4
Find latest file in a directory
This is sample output - yours may be different.
0

ls -rt | tail -n 1

m0rf · 2012-09-06 07:07:35 5
Function to check whether a regular file ends with a newline

end_w_nl filename will check if the last byte of filename is a unix newline character. tail -c1 yields the file's last byte and xxd converts it to hex format.
This is sample output - yours may be different.
0

end_w_nl() { [[ $(tail -c1 $1 | xxd -ps) == 0a ]] }

xro · 2012-09-18 20:11:29 5
Find the 10 users that take up the most disk space

without reverse...
This is sample output - yours may be different.
0

du -sm /home/* | sort -n | tail -10

bertatum · 2012-10-11 13:58:30 4
delete first X lines of a file

'newfile' will have content of 'file' minus first 55 lines to delete first line only do: tail +2 file > newfile
This is sample output - yours may be different.
0

tail +56 file > newfile

basic612 · 2012-10-26 03:04:12 7
Pipe system log to espeak
This is sample output - yours may be different.
0

tail -f /var/log/messages.log | while read line ; do echo $line | cut -d \ -f5- | sed s/\\[[0-9]*\\]// | espeak ; done

asdfkajsdfh · 2012-10-27 23:00:53 4
Show and update a log file
This is sample output - yours may be different.
0

tail -F logfile

dckt · 2012-11-15 10:12:20 4
count & sort one field of the log files

count & sort one field of the log files , such as nginx/apache access log files .
This is sample output - yours may be different.
0

tail -1000 `ls -ltr /var/log/CF* |tail -1|awk '{print $9}'`|cut -d "," -f 17|sort|uniq -c |sort -k2

raindylong · 2012-11-30 16:30:41 5
show 20 last modified files in current directory including subdirectories
This is sample output - yours may be different.
0

find . -type f -printf "%T@ %Tc %p\n" |sort -n |cut -d' ' -f2- |tail -n20

guziec · 2012-12-04 14:23:55 4
csv file of ping every minutes

Used in OS X. tr "\n" ";" may be replaced by echo ";" with linux versions of date. I reused ping -q -c 1 www.google.com|tail -1|cut -d/ -f5 Show Sample Output
This is sample output - yours may be different.
```
Mer  6 f?v 2013 22:58:23 CET;37.756
Mer  6 f?v 2013 22:58:24 CET;36.194
Mer  6 f?v 2013 22:58:25 CET;28.422
Mer  6 f?v 2013 22:58:26 CET;38.456
Mer  6 f?v 2013 22:58:27 CET;29.385
Mer  6 f?v 2013 22:58:28 CET;38.182
Mer  6 f?v 2013 22:58:29 CET;27.605
```
0

while true; do (date | tr "\n" ";") && ping -q -c 1 www.google.com|tail -1|cut -d/ -f5 ;sleep 1; done >> uptime.csv

fanchok · 2013-02-06 22:06:09 6
Order all files oldest to newest then get the last one touched

On the Mac, the 'ls' function can sort based on month/day/time, but seems to lack ability to filter on the Year field (#9 among the long listed fields). The sorted list continuously increases the 'START' year for the most recently accessed set of files. The final month printed will be the highest month that appeared in that START year. The command does its magic on the current directory, and suitably discards all entries that are themselves directories. If you expect files dating prior to 2002, change the START year accordingly.
This is sample output - yours may be different.
0

ls -lT -rt | grep "^-" | awk 'BEGIN {START=2002} (START <= $9){ print $10 ;START=$9 }' | tail -1

Glamdring · 2013-02-24 23:39:22 7
Easily find an old command you run

this also can find the old command you used before
This is sample output - yours may be different.
0

history | tail -100 | grep cmd

datamining · 2013-04-22 03:49:43 9
Send murmurd log lines to syslog

Sends log lines from murmur's (the mumble server's) logfile to syslog.
This is sample output - yours may be different.
0

nohup tail /var/log/murmur.log | perl -ne '/^<.>[0-9:. -]{24}(\d+ => )?(.*)/; $pid=`pgrep -u murmur murmurd | head`; chomp $pid; `logger -p info -t "murmurd[$pid]" \\"$2\\"`;' &

MagisterQuis · 2013-05-25 01:12:52 6
Print the total lines number of a file

This command print the last line of a file with in first position the total lines number. Show Sample Output
This is sample output - yours may be different.
```
LINE_NUMBERS FILE_CONTENT
```
0

nl FILE_NAME | tail -n 1

P3ter · 2013-07-04 21:54:59 12
compute the qps according to the latest n lines of logs
This is sample output - yours may be different.
0

tail -n 1000 access.log | grep "200 POST" | awk '{print substr($3,0,9)}' | awk '{data[$0]++}END{for(item in data){print item, data[item]}}'

hefei1986 · 2013-08-19 08:15:33 11
Get the Nth argument of the last command in $HISTFILE

This gets the Nth argument in the last line of your history file. This is useful where history is being written after each command, and you want to use arguments from the previous command in the current command, such as when doing copies/moving directories etc. I wrote this after getting irritated with having to continually type in long paths/arguments. You could also use $_ if all you want is the last argument. Show Sample Output
This is sample output - yours may be different.
```
$ echo "This little piggy went to the market"
This little piggy went to the market
$ garg 5
went
```
0

function garg () { tail -n 1 ${HISTFILE} | awk "{ print \$$1 }" }

plasticphyte · 2013-09-10 04:07:46 10
Remove all older kernels then the current running kernel for Ubuntu/Debian base system
This is sample output - yours may be different.
0

export KEEP_KERNEL=2; dpkg -l 'linux-image*' | awk '/^ii/ { print $2 }' | grep "[0-9]" | awk 'BEGIN{i=1}{print i++, $0}' | grep `uname -r` -B99 | sort -r | tail -n+$(($KEEP_KERNEL+2)) | awk '{print $2}'| xargs apt-get -y purge

The_IceMan_Blog · 2013-11-23 15:35:42 7
Find files and calculate size of result in shell
This is sample output - yours may be different.
0

find . -name "pattern" -type f -exec du -ch {} + | tail -n1

stecman · 2014-01-17 03:26:26 7
adb connect to last IP address

Connects to the last adb connection in history. Show Sample Output
This is sample output - yours may be different.
```
success:
adb connect 10.10.20.6

fail:
unable to connect to 10.10.20.6:5555
```
0

eval $(history | cut -c 8- | grep "adb connect [0-9]" | tail -1)

CanOrhan · 2014-02-27 14:44:27 7
AIX: get LUN ID for a given filesystem

For a given filesystem return the LUN ID. Command assumes 1:1 relationship between fs:lv:hdisk:lun which may not be the case in all environments. Show Sample Output
This is sample output - yours may be different.
```
$ getlunid /usr
371100c801ef00004c0000000102745c6e41.105VDASD03AIXvscsi
```
0

getlunid() { lv=$(df -P $1|grep "^/dev/"|awk '{print $1}'|awk -F/ '{print $3}'); hd=$(lslv -l $lv|tail -1|awk '{print $1}');id=$(odmget -q "name like $hd AND attribute=unique_id" CuAt|grep "value ="|awk -F= '{print $2}'|tr -d '"');echo $id;}

bigstupid · 2014-04-20 18:43:21 6
Get the total length of all videos in the current dir in H:m:s

Use case insensitive regex to match files ending in popular video format extensions and calculate their total time. (traverses all files recursively starting from the current directory) Show Sample Output
This is sample output - yours may be different.
```
203:11:32
```
0

find -type f -iregex '.*\.$mkv\|mp4\|wmv\|flv\|webm\|mov\|dat\|flv$' -print0 | xargs -0 mplayer -vo dummy -ao dummy -identify 2>/dev/null | perl -nle '/ID_LENGTH=([0-9\.]+)/ && ($t +=$1) && printf "%02d:%02d:%02d\n",$t/3600,$t/60%60,$t%60' | tail -n 1

powerinside · 2014-06-07 15:50:41 6
Print machine's ipv4 addresses
This is sample output - yours may be different.
0

echo $(ifconfig) | egrep -o "en.*?inet [^ ]* " | sed 's/.*inet $.*$$/\1/' | tail -n +2

davethomas11 · 2014-06-19 22:09:03 7
show filenames in tail output with color

This shows the the filenames of tail output in color. Helpful if you have many log files to tail
This is sample output - yours may be different.
0

tail -f *.log | grep --color=always '|==>.+<=='

danimath · 2014-07-11 07:47:27 7
Backup to LTO Tape with progress, checksums and buffering

This will write to TAPE (LTO3-4 in my case) a backup of files/folders. Could be changed to write to DVD/Blueray. Go to the directory where you want to write the output files : cd /bklogs Enter a name in bkname="Backup1", enter folders/files in tobk="/home /var/www". It will create a tar and write it to the tape drive on /dev/nst0. In the process, it will 1) generate a sha512 sum of the tar to $bkname.sha512; so you can validate that your data is intact 2) generate a filelist of the content of the tar with filesize to $bkname.lst 3) buffer the tar file to prevent shoe-shining the tape (I use 4GB for lto3(80mb/sec), 8gb for lto4 (120mb/sec), 3Tb usb3 disks support those speed, else I use 3x2tb raidz. 4) show buffer in/out speed and used space in the buffer 5) show progress bar with time approximation using pv ADD : To eject the tape : ; sleep 75; mt-st -f /dev/nst0 rewoffl TODO: 1) When using old tapes, if the buffer is full and the drive slows down, it means the tape is old and would need to be replaced instead of wiping it and recycling it for an other backup. Logging where and when it slows down could provide good information on the wear of the tape. I don't know how to get that information from the mbuffer output and to trigger a "This tape slowed down X times at Y1gb, Y2gb, Y3gb down to Zmb/s for a total of 30sec. It would be wise to replace this tape next time you want to write to it." 2) Fix filesize approximation 3) Save all the output to $bkname.log with progress update being new lines. (any one have an idea?) 4) Support spanning on multiple tape. 5) Replace tar format with something else (dar?); looking at xar right now (https://code.google.com/p/xar/), xml metadata could contain per file checksum, compression algorithm (bzip2, xv, gzip), gnupg encryption, thumbnail, videopreview, image EXIF... But that's an other project. TIP: 1) You can specify the width of the progressbar of pv. If its longer than the terminal, line refresh will be written to new lines. That way you can see if there was speed slowdown during writing. 2) Remove the v in tar argument cvf to prevent listing all files added to the archive. 3) You can get tarsum (http://www.guyrutenberg.com/2009/04/29/tarsum-02-a-read-only-version-of-tarsum/) and add >(tarsum --checksum sha256 > $bkname_list.sha256) after the tee to generate checksums of individual files !
This is sample output - yours may be different.
0

bkname="test"; tobk="*" ; totalsize=$(du -csb $tobk | tail -1 | cut -f1) ; tar cvf - $tobk | tee >(sha512sum > $bkname.sha512) >(tar -tv > $bkname.lst) | mbuffer -m 4G -P 100% | pv -s $totalsize -w 100 | dd of=/dev/nst0 bs=256k

johnr · 2014-07-22 15:47:50 8
‹ First < 6 7 8 9 10 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

open a screenshot of a remote desktop via ssh

standard image viewers do not seem to be able to open a FIFO file. xloadimage was the first one i've stumbled upon that can handle this.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Repoint an existing symlink to a new location

Instead of deleting an existing symlink and then re-creating it pointing at the new location, it is possible to perform the same action with this one command. Interesting discussion on whether this is possible to do atomically here: http://answers.google.com/answers/threadview?id=526119

Create .pdf from .doc

sudo apt-get install cups-pdf

Look up a unicode character by name

No need for further filedes or substitution for splitting. Simply use read a b

Capture video of a linux desktop

This is identical to the original command, but allows you to specify an offset if you have multiple monitors. In this case you'll record a 1366x768 window that's offset by 1366 pixels in the x axis and 0 pixels in the y axis. Note also that the -sameq option has been replaced by -qscale - at least in ffmpeg version 1.2.1 on Fedora 19.

Do a command but skip recording it in the bash command history

Note the extra space before the command (I had to put it as an underscore since the website eats up preceding spaces). That's all it takes. Now if you check your history with "$ history", it wont show up.

Convert GoogleCL gmail contacts to cone adress book

Full Command: $ google contacts list name,name,email|perl -pne 's%^((?!N\/A)(.+?)),((?!N\/A)(.+?)),([a-z0-9\._-]+\@([a-z0-9][a-z0-9-]*[a-z0-9]\.)+([a-z]+\.)?([a-z]+))%${1}:${3} %imx'|grep -oP '^((?!N\/A)(.+?)) ' | sort You'll need googlecl and python-gdata. First setup google cl via: $ google Then give your PC access $ google contacts list name,email Then do the command, save it or use this one to dump it in the cone-address.txt file in your home dir: $ google contacts list name,name,email | perl -p -n -e 's%^((?!N\/A)(.+?)),((?!N\/A)(.+?)),([a-z0-9\._-]+\@([a-z0-9][a-z0-9-]*[a-z0-9]\.)+([a-z]+\.)?([a-z]+))%${1}:${3} %imx' | grep -o -P '^((?!N\/A)(.+?)) ' | sort > ~/cone-adress.txt Then import into cone. It filters out multiple emails, and contacts with no email that have N/A. (Picasa photo persons without email for example...)

Files extension change

Changing a file extension to a new one for all files in a directory.

Use md5sum to check your music and movie files. Also use diff.

This is a beginning script. You can create a file with > filename. You can also use diff to compare output run at different times to verify no change in your files. I apologize in advance if this is too simple. For some it should be a start.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using tail

Commands using tail (292) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using tail (292)

sorted by