Commands by totti (87)

  • Matched string reference in replacement text

    Use matched data and some other as replacement data Show Sample Output


    0
    echo "abcde" | sed 's/./& /g'
    totti · 2011-08-26 16:54:26 7
  • Notify on Battery power

    Works on Laptops, Desktop having communication b/w UPS & CPU Show Sample Output


    0
    NotifyOnBATTERY () { while :; do on_ac_power||notify-send "Running on BATTERY"; sleep 1m; done }
    totti · 2011-08-26 11:54:16 7
  • Download a set of files that are numbered


    0
    for i in `seq -w 1 50`; do wget --continue \ http://commandline.org.uk/images/posts/animal/$i.jpg; done
    totti · 2011-08-19 20:06:16 5
  • Get full from half remembered commands

    Show all commands having the part known by you. Eg: apropos pdf | less Show Sample Output


    2
    apropos <part_rember> | less
    totti · 2011-08-19 19:34:57 6
  • Alternative for basename using grep to extract file name

    fileName /path/to/file.ext quivalent to basename /path/to/file.ext Show Sample Output


    -1
    fileName() { echo "$1" | grep -o "[^/]*$"; }
    totti · 2011-08-19 18:16:22 3
  • Boot block devices as virtual devices in Virtual Box

    eg: VBoxManage internalcommands createrawvmdk -filename ~/.VBox_sdc.vmdk -rawdisk /dev/sdc In order to start virtual box using block devices, ( Or to boot from it) run as ROOT sudo VirtualBox Then add & select the vmdk file as a device. At last Start the virtual box. - This cmd needs to run once for a device. - See command 8936 to run with out using ROOT power and easy handling of Virtual m/c


    0
    VBoxManage internalcommands createrawvmdk -filename [path/to/file/name.vmdk] -rawdisk /dev/[block_device]
    totti · 2011-08-19 14:26:22 8
  • Find all videos under current directory using MIME a.k.a not using extension

    Videos are found using their MIME type. Thus no need to for an extension for the video file. This is a efficent version of "jnash" cmd (4086). Thanks for jnash. This cmd will only show video files while his cmd show files having "video" anywhere in path. Show Sample Output


    1
    allVideos() { find ./ -type f -print0 | xargs -0 file -iNf - | grep ": video/" | cut -d: -f1; }
    totti · 2011-08-19 11:58:59 3
  • What is the use of this switch ?

    Find the usage of a switch with out searching through the entire man page. Usage: manswitch [cmd] [switch] Eg: manswitch grep silent ____________________________ In simple words man <cmd> | grep "\-<switch>" Eg: man grep | grep "\-o" This is not a standard method but works. Show Sample Output


    1
    manswitch() { man $1 | grep -A5 "^ *\-$2"; }
    totti · 2011-08-19 08:36:54 5
  • Sort output by column

    (separator = $IFS)


    2
    ps aux | sort -nk 6
    totti · 2011-08-16 11:04:45 3
  • Check if your webserver supports gzip compression with curl


    6
    curl -I -H "Accept-Encoding: gzip,deflate" http://example.org
    totti · 2011-08-16 10:32:01 4
  • Highlight network TX, RX information change


    5
    watch -n 2 -d '/sbin/ifconfig eth0'
    totti · 2011-08-16 10:29:34 4
  • Boot from a block device without giving root privilege to Virtual Box

    Usage: VBoxBlockBoot [Virtual_Machine] [Block_device] Eg: VBoxBlockBoot WinXP /dev/sdc In another words vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm Where vm --> Name of the virtual machine to start usb --> Block device to use. (/dev/sdc) This can used after setup up a boot loader on to my USB pen drive or HDD (After creating Live USB). Here root privilege is needed but not granted to Virtual Box. Thus we can access all our VM.( If we run VBox as root we can't access our VMs). Root privilege is used to - Unmount the storage device - Chmod to full access (777) Requirements:- 1. Device information file (rawvmdk file) created by the following command. Need to run only once. Not bad to run many. VBoxCreateRawDisk() { VBoxManage internalcommands createrawvmdk -filename ~/.rawHD4VB_`basename "$1"`.vmdk -rawdisk "$1"; } 2. Root privilege to umount & chmod 3. Real storage medium (ie /dev/*) (Non-virtual such as USB HD, pen drive, a partition) 4. A virtual m/c already available (here "usb") vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1"; } Show Sample Output


    0
    VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1";}
    totti · 2011-07-29 13:04:19 4
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Remove a range of lines from a file
Delete a range of line

UPS Tracking Script

Query Wikipedia via console over DNS
Query Wikipedia by issuing a DNS query for a TXT record. The TXT record will also include a short URL to the complete corresponding Wikipedia entry.You can also write a little shell script like: $ $ cat wikisole.sh $ #!/bin/sh $ dig +short txt ${1}.wp.dg.cx and run it like $ ./wikisole.sh unix were your first option ($1) will be used as search term.

Equivalent to ifconfig -a in HPUX
Command is properly working on HP-UX 11.31

Set a posix shell to echo all commands that it's about to execute, after all expansions have been done.
the 'set -x' mode can be exited by typing $ set +x

Update your OpenDNS network ip
Intended for dynamic ip OpenDNS users, this command will update your OpenDNS network IP. For getting your IP, you can use one of the many one-liners here on commandlinefu. Example: I use this in a script which is run by kppp after it has successfully connected to my ISP: --- #!/bin/bash IP="`curl -s http://checkip.dyndns.org/ | grep -o '[[:digit:].]\+'`" PW="hex-obfuscated-pw-here" if [ "$IP" == "" ] ; then echo 'Not online.' ; exit 1 else wget -q --user=topsecret --password="`echo $PW | xxd -ps -r`" 'https://updates.opendns.com/nic/update?hostname=myhostname&myip='"$IP" -O - /etc/init.d/ntp-client restart & fi --- PS: DynDNS should use a similar method, if you know the URL, please post a comment. (Something with members.dyndns.org, if I recall correctly)

scroll file one line at a time (w/only UNIX base utilities)
usage examples ls largedir |rd lynx -dump largewebsite.com |rd rd < largelogfile

Create a system overview dashboard on F12 key
Command binds a set of commands to the F12 key. Feel free to alter the dashboard according to your own needs. How to find the key codes? Type $ read Then press the desired key (example: F5) $ ^[[15~ Try $ bind '"\e[15~"':"\"ssh su@ip-address\C-m""" or $ bind '"\e[16~"':"\"apachectl -k restart\C-m"""

Lookup your own IPv4 address

A DESTRUCTIVE command to render a drive unbootable
THIS COMMAND IS DESTRUCTIVE. That said, lets assume you want to render your boot drive unbootable and reboot your machine. Maybe you want it to boot off the network and kickstart from a boot server for a fresh OS install. Replace /dev/fd0 with the device name of your boot drive and this DESTRUCTIVE command will render your drive unbootable. Your BIOS boot priority should be set to boot from HD first, then LAN.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: