Commands using printf (206)

  • Convert number of bytes to human readable filesize

    Converts a number of bytes provided as input, to a human readable number. Show Sample Output


    2
    human_filesize() { awk -v sum="$1" ' BEGIN {hum[1024^3]="Gb"; hum[1024^2]="Mb"; hum[1024]="Kb"; for (x=1024^3; x>=1024; x/=1024) { if (sum>=x) { printf "%.2f %s\n",sum/x,hum[x]; break; } } if (sum<1024) print "1kb"; } '}
    ArtBIT · 2011-12-02 18:21:20 3
  • Matrix Style

    Unlike other alternatives, this command only relies on bash builtins and should also work on windows platforms with the bash executable. Sparseness corresponds to the number 128 and can be adjusted. To print all possible digits instead of only 0 and 1 replace RANDOM%2 by RANDOM%10 or RANDOM%16 to add letters [A-F]. Show Sample Output


    2
    while true; do printf "\e[32m%X\e[0m" $((RANDOM%2)); for ((i=0; i<$((RANDOM%128)); i++)) do printf " "; done; done
    seb1245 · 2012-11-27 10:40:42 11
  • Print today's date in ISO format without calling an external command (bash 4)


    2
    today() { printf '%(%Y-%m-%d)T\n' -1; } ## bash-4
    cfajohnson · 2013-01-27 06:17:25 6
  • urlencoding with one pure BASH builtin

    opposite of https://www.commandlinefu.com/commands/view/10014/urldecoding-with-one-pure-bash-builtin ;-) Show Sample Output


    2
    function URLEncode { local dataLength="${#1}"; local index; for ((index = 0;index < dataLength;index++)); do local char="${1:index:1}"; case $char in [a-zA-Z0-9.~_-]) printf "$char"; ;; *) printf "%%%02X" "'$char"; ;; esac; done; }
    emphazer · 2018-09-14 12:08:10 368
  • draw line separator (using knoppix5 idea)


    2
    printf '*%.s' {1..40}; echo
    metropolis · 2019-07-01 07:41:18 48
  • seconds since epoch to ISO timestamp

    No need to use perl, awk, nor /usr/bin/date -- bash's "printf" builtin will do it. Show Sample Output


    2
    printf '%(%FT%T)T\n' 1606752450
    Mozai · 2021-06-20 05:11:20 180
  • Big (four-byte) $RANDOM

    Sometimes, in a shell script, you need a random number bigger than the range of $RANDOM. This will print a random number made of four hex values extracted from /dev/urandom. Show Sample Output


    1
    printf %d 0x`dd if=/dev/urandom bs=1 count=4 2>/dev/null | od -x | awk 'NR==1 {print $2$3}'`
    introp · 2009-02-18 16:23:09 6
  • Doing some floating point calculations with rounding (e.g. at the 3rd decimal)


    1
    echo '123/7' |bc -l |xargs printf "%.3f\n"
    mrttlemonde · 2009-03-18 14:20:32 5
  • get the ascii number with bash builtin printf


    1
    printf "%d\n" "'A" "'B"
    twfcc · 2009-10-17 09:50:44 4
  • Get decimal ascii code from character

    printf treats first char after single ' as numeric equivalent


    1
    ord() { printf "%d\n" "'$1"; }
    zude · 2009-10-17 22:02:52 3
  • Find all dot files and directories


    1
    printf "%s\n" .*
    cfajohnson · 2009-11-20 21:41:02 3
  • Configuring proxy client on terminal without leaving password on screen or in bash_history

    Prompts the user for username and password, that are then exported to http_proxy for use by wget, yum etc Default user, webproxy and port are used. Using this script prevent the cleartext user and pass being in your bash_history and on-screen Show Sample Output


    1
    set-proxy () { P=webproxy:1234; DU="fred"; read -p "username[$DU]:" USER; printf "%b"; UN=${USER:-$DU}; read -s -p "password:" PASS; printf "%b" "\n"; export http_proxy="http://${UN}:${PASS}@$P/"; export ftp_proxy="http://${UN}:${PASS}@$P/"; }
    shadycraig · 2010-02-04 13:12:59 5
  • Url Encode

    This one uses hex conversion to do the converting and is in shell/sed only (should probably still use the python/perl version).


    1
    uri_escape(){ echo -E "$@" | sed 's/\\/\\\\/g;s/./&\n/g' | while read -r i; do echo $i | grep -q '[a-zA-Z0-9/.:?&=]' && echo -n "$i" || printf %%%x \'"$i" done }
    infinull · 2010-02-13 01:39:51 42
  • shell function to underline a given string.

    underline() will print $1, followed by a series of '=' characters the width of $1. An optional second argument can be used to replace '=' with a given character. This function is useful for breaking lots of data emitted in a for loop into sections which are easier to parse visually. Let's say that 'xxxx' is a very common pattern occurring in a group of CSV files. You could run grep xxxx *.csv This would print the name of each csv file before each matching line, but the output would be hard to parse visually. for i in *.csv; do printf "\n"; underline $i; grep "xxxx" $i; done Will break the output into sections separated by the name of the file, underlined. Show Sample Output


    1
    underline() { echo $1; for (( i=0; $i<${#1}; i=$i+1)); do printf "${2:-=}"; done; printf "\n"; }
    bartonski · 2010-02-26 05:46:49 8
  • a function to create a box of '=' characters around a given string.

    The function 'box' takes either one or two arguments. The first argument is a line of text to be boxed, the second argument (optional) is a character to use to draw the box. By default, the drawing character will be '='. The function 'n()' is a helper function used to draw the upper and lower lines of the box, its arguments are a length, and an character to print. (I used 'n' because 'line', 'ln' and 'l' are all commonly used) Show Sample Output


    1
    box() { l=${#1}+4;x=${2:-=};n $l $x; echo "$x $1 $x"; n $l $x; }; n() { for (( i=0; $i<$1; i=$i+1)); do printf $2; done; printf "\n"; }
    bartonski · 2010-02-26 06:56:59 3
  • Get acurate memory usage of a Process in MegaBytes


    1
    pmap $(pgrep [ProcessName] -n) | gawk '/total/ { a=strtonum($2); b=int(a/1024); printf b};'
    lv4tech · 2010-04-28 08:16:28 3
  • Combines an arbitrary number of transparent png files into one file

    This one liner; combines all sequentially numbered files; in this example IMG_0001.png to IMG_1121.png by generating the shell script, making the shell script executable and then running the shell script to combine the 1121 png into a single png file named _final.png tested on Mac OS X 10.6.3 with ImageMagick 6.5.8-0 2009-11-22 Q16 http://www.imagemagick.org


    1
    echo -n "convert " > itcombino.sh; printf "IMG_%00004u.png " {1..1121} >> itcombino.sh; echo -n "-layers merge _final.png" >> itcombino.sh; chmod +x itcombino.sh && ./itcombino.sh
    IsraelTorres · 2010-05-22 03:56:30 5
  • create a new script, automatically populating the shebang line, editing the script, and making it executable.

    The first argument is the interpreter for your script, the second argument is the name of the script to create. Show Sample Output


    1
    shebang() { if i=$(which $1); then printf '#!%s\n\n' $i > $2 && vim + $2 && chmod 755 $2; else echo "'which' could not find $1, is it in your \$PATH?"; fi; }
    bartonski · 2011-03-09 14:47:32 25
  • Watch RX/TX rate of an interface in kb/s

    A shorter version Show Sample Output


    1
    while cat /proc/net/dev; do sleep 1; done | awk '/eth0/ {o1=n1; o2=n2; n1=$2; n2=$10; printf "in: %9.2f\t\tout: %9.2f\r", (n1-o1)/1024, (n2-o2)/1024}'
    quadcore · 2011-03-26 02:52:14 3
  • monitor your CPU core temperatures in real time

    Watch the temperatures of your CPU cores in real time at the command line. Press CONTROL+C to end. GORY DETAILS: Your computer needs to support sensors (many laptops, for example, do not). You'll need to install the lm-sensors package if it isn't already installed. And it helps to run the `sensors-detect` command to set up your sensor kernel modules first. At the very end of the sensors-detect interactive shell prompt, answer YES to add the new lines to the list of kernel modules loaded at boot. Show Sample Output


    1
    while :; do sensors|grep ^Core|while read x; do printf '% .23s\n' "$x"; done; sleep 1 && clear; done;
    linuxrawkstar · 2011-04-20 06:41:57 7
  • Colored status of running services

    Replace service --status-all 2>&1 by service --status-all 2>/dev/null to hide all services with the status [ ? ]


    1
    services() { printf "$(service --status-all 2>&1|sed -e 's/\[ + \]/\\E\[42m\[ + \]\\E\[0m/g' -e 's/\[ - \]/\\E\[41m\[ - \]\\E\[0m/g' -e 's/\[ ? \]/\\E\[43m\[ ? \]\\E\[0m/g')\n";}
    stanix · 2011-04-23 12:38:09 4
  • Scan for [samba|lanman] NetBIOS names and ip addresses in LAN by ARP.


    1
    arp-scan -I eth0 -l | perl -ne '/((\d{1,3}\.){3}\d{1,3})/ and $ip=$1 and $_=`nmblookup -A $ip` and /([[:alnum:]-]+)\s+<00>[^<]+<ACTIVE>/m and printf "%15s %s\n",$ip,$1'
    bandie91 · 2011-07-08 07:41:41 3
  • Generate a shortened URL with is.gd

    Check the API. You shouldn't need sed. The print-newline at the end is to prevent zsh from inserting a % after the end-of-output. Also works with http://v.gd Show Sample Output


    1
    isgd () { curl 'http://is.gd/create.php?format=simple&url='"$1" ; printf "\n" }
    dbbolton · 2011-08-14 23:31:39 3
  • One line Perl Script to determine the largest file sizes on a Linux Server

    This one line Perl script will display the smallest to the largest files sizes in all directories on a server. Show Sample Output


    1
    du -k | sort -n | perl -ne 'if ( /^(\d+)\s+(.*$)/){$l=log($1+.1);$m=int($l/log(1024)); printf ("%6.1f\t%s\t%25s %s\n",($1/(2**(10*$m))),(("K","M","G","T","P")[$m]),"*"x (1.5*$l),$2);}' | more
    Q_Element · 2012-02-07 15:49:19 10
  • Count all files in directories recursively with find

    Counts the files present in the different directories recursively. One only has to change maxdepth to have further insight in the directory hierarchy. Found at unix.stackexchange.com: http://unix.stackexchange.com/questions/4105/how-do-i-count-all-the-files-recursively-through-directories Show Sample Output


    1
    find -maxdepth 3 -type d | while read -r dir; do printf "%s:\t" "$dir"; find "$dir" | wc -l; done
    brainstorm · 2012-10-15 15:00:09 7
  • ‹ First  < 2 3 4 5 6 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Mouse Tracking
Will track your mouse and save it to a file. You can use gnuplot to graph it: $ gnuplot -persist

nmap port scanning
TCP Connect scanning for localhost and network 192.168.0.0/24

Create several copies of a file
Copy a file to a range of other files.

Increase SCT of external USB disk enclosure to one hour.
So I had this 2TB Seagate external disk/USB enclosure which by default would spin-down its internal drive (it enters a standby mode) after four minutes of inactivity.. Spinning-up the inactive drive was an annoying delay when accessing files and also it severely interfered with NFS.. SCT stands for "Standby Condition Timer". To completely disable SCT: $ sdparm --clear STANDBY -6 /dev/sdb To return to original (default) SCT settings: $ sdparm -D -p 0x1a -6 /dev/sdb To verify the settings (before and after): $ sdparm -a /dev/sdb No need for vendor-provided MSWIN tools, etc.

Find usb device in realtime
Using this command you can track a moment when usb device was attached.

check the status of 'dd' in progress (OS X)
Your platform may not have pv by default. If you are using Homebew on OSX, simply 'brew install pv'.

Show URL/text in clipboard as QR code
Copy a URL (or Thai text, or whatever) and hit the keyboard shortcut for this fu to display it as a QR code. It's an "air gapped" way to send stuff to your phone [unlike google chart API etc.] as long as you watch out for cameras ;). dependencies [sudo apt-get install]: qrencode xclip xloadimage

watch process stack, sampled at 1s intervals
This command repeatedly gets the specified process' stack using pstack (which is an insanely clever and tiny wrapper for gdb) and displays it fullscreen. Since it updates every second, you rapidly get an idea of where your program is stuck or spending time. The 'tac' is used to make the output grow down, which makes it less jumpy. If the output is too big for your screen, you can always leave the 'tac' off to see the inner calls. (Or, better yet--get a bigger screen.) Caveats: Won't work with stripped binaries and probably not well with threads, but you don't want to strip your binaries or use threads anyway.

Yet Another Large Screen Clock

Recursively execute command on directories (.svn, permissions, etc)
The above command will set the GID bit on all directories named .svn in the current directory recursively. This makes the group ownership of all .svn folders be the group ownership for all files created in that folder, no matter the user. This is useful for me as the subversion working directory on my server is also the live website and needs to be auto committed to subversion every so often via cron as well as worked on by multiple users. Setting the GID bit on the .svn folders makes sure we don't have a mix of .svn metadata created by a slew of different users.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: