Commands by totti (87)

  • Matched string reference in replacement text

    Use matched data and some other as replacement data Show Sample Output


    0
    echo "abcde" | sed 's/./& /g'
    totti · 2011-08-26 16:54:26 7
  • Notify on Battery power

    Works on Laptops, Desktop having communication b/w UPS & CPU Show Sample Output


    0
    NotifyOnBATTERY () { while :; do on_ac_power||notify-send "Running on BATTERY"; sleep 1m; done }
    totti · 2011-08-26 11:54:16 7
  • Download a set of files that are numbered


    0
    for i in `seq -w 1 50`; do wget --continue \ http://commandline.org.uk/images/posts/animal/$i.jpg; done
    totti · 2011-08-19 20:06:16 5
  • Get full from half remembered commands

    Show all commands having the part known by you. Eg: apropos pdf | less Show Sample Output


    2
    apropos <part_rember> | less
    totti · 2011-08-19 19:34:57 6
  • Alternative for basename using grep to extract file name

    fileName /path/to/file.ext quivalent to basename /path/to/file.ext Show Sample Output


    -1
    fileName() { echo "$1" | grep -o "[^/]*$"; }
    totti · 2011-08-19 18:16:22 3
  • Boot block devices as virtual devices in Virtual Box

    eg: VBoxManage internalcommands createrawvmdk -filename ~/.VBox_sdc.vmdk -rawdisk /dev/sdc In order to start virtual box using block devices, ( Or to boot from it) run as ROOT sudo VirtualBox Then add & select the vmdk file as a device. At last Start the virtual box. - This cmd needs to run once for a device. - See command 8936 to run with out using ROOT power and easy handling of Virtual m/c


    0
    VBoxManage internalcommands createrawvmdk -filename [path/to/file/name.vmdk] -rawdisk /dev/[block_device]
    totti · 2011-08-19 14:26:22 8
  • Find all videos under current directory using MIME a.k.a not using extension

    Videos are found using their MIME type. Thus no need to for an extension for the video file. This is a efficent version of "jnash" cmd (4086). Thanks for jnash. This cmd will only show video files while his cmd show files having "video" anywhere in path. Show Sample Output


    1
    allVideos() { find ./ -type f -print0 | xargs -0 file -iNf - | grep ": video/" | cut -d: -f1; }
    totti · 2011-08-19 11:58:59 3
  • What is the use of this switch ?

    Find the usage of a switch with out searching through the entire man page. Usage: manswitch [cmd] [switch] Eg: manswitch grep silent ____________________________ In simple words man <cmd> | grep "\-<switch>" Eg: man grep | grep "\-o" This is not a standard method but works. Show Sample Output


    1
    manswitch() { man $1 | grep -A5 "^ *\-$2"; }
    totti · 2011-08-19 08:36:54 5
  • Sort output by column

    (separator = $IFS)


    2
    ps aux | sort -nk 6
    totti · 2011-08-16 11:04:45 3
  • Check if your webserver supports gzip compression with curl


    6
    curl -I -H "Accept-Encoding: gzip,deflate" http://example.org
    totti · 2011-08-16 10:32:01 4
  • Highlight network TX, RX information change


    5
    watch -n 2 -d '/sbin/ifconfig eth0'
    totti · 2011-08-16 10:29:34 4
  • Boot from a block device without giving root privilege to Virtual Box

    Usage: VBoxBlockBoot [Virtual_Machine] [Block_device] Eg: VBoxBlockBoot WinXP /dev/sdc In another words vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm Where vm --> Name of the virtual machine to start usb --> Block device to use. (/dev/sdc) This can used after setup up a boot loader on to my USB pen drive or HDD (After creating Live USB). Here root privilege is needed but not granted to Virtual Box. Thus we can access all our VM.( If we run VBox as root we can't access our VMs). Root privilege is used to - Unmount the storage device - Chmod to full access (777) Requirements:- 1. Device information file (rawvmdk file) created by the following command. Need to run only once. Not bad to run many. VBoxCreateRawDisk() { VBoxManage internalcommands createrawvmdk -filename ~/.rawHD4VB_`basename "$1"`.vmdk -rawdisk "$1"; } 2. Root privilege to umount & chmod 3. Real storage medium (ie /dev/*) (Non-virtual such as USB HD, pen drive, a partition) 4. A virtual m/c already available (here "usb") vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1"; } Show Sample Output


    0
    VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1";}
    totti · 2011-07-29 13:04:19 4
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Take screenshot through SSH
When connected to a box via ssh you can do a quick screenshot of that box using this command. After that you can rscp it over to your box and look at it.

iso-8859-1 to utf-8 safe recursive rename
This command is a powerful "detoxifier" that eliminates special chars, spaces and all those little chars we don't like. It support several "sequences" so be sure to check your /usr/local/etc/detoxrc while at it... and maybe define your own

list files recursively by size

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Spell check the text in clipboard (paste the corrected clipboard if you like)
xclip -o > /tmp/spell.tmp # Copy clipboard contents to a temp file aspell check /tmp/spell.tmp # Run aspell on that file cat /tmp/spell.tmp | xclip # Copy the results back to the clipboard, so that you can paste the corrected text I'm not sure xclip is installed in most distributions. If not, you can install x11-apps package

watch your network load on specific network interface
-n means refresh frequency you could change eth0 to any interface you want, like wlan0

Mount SMB share with password containing special characters
If the password for the share your trying to mount contains special characters you can use URL escape characters. The above command uses an example as follows: username: user password: p@ss URL Encoded password: p%40ss All credit goes to Richard York: http://www.smilingsouls.net/Blog/20110526100731.html Also check out this URL Decoder/Encoder to convert your passwords. http://meyerweb.com/eric/tools/dencoder/

Reboot as a different OS in Grub
This will reboot as the Grub 2 option.

quickly backup or copy a file with bash
This inserts timestamp instead of .bak extension.

Sort installed rpms in alphabetic order with their size.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: