Commands by totti (87)

  • Matched string reference in replacement text

    Use matched data and some other as replacement data Show Sample Output


    0
    echo "abcde" | sed 's/./& /g'
    totti · 2011-08-26 16:54:26 7
  • Notify on Battery power

    Works on Laptops, Desktop having communication b/w UPS & CPU Show Sample Output


    0
    NotifyOnBATTERY () { while :; do on_ac_power||notify-send "Running on BATTERY"; sleep 1m; done }
    totti · 2011-08-26 11:54:16 7
  • Download a set of files that are numbered


    0
    for i in `seq -w 1 50`; do wget --continue \ http://commandline.org.uk/images/posts/animal/$i.jpg; done
    totti · 2011-08-19 20:06:16 5
  • Get full from half remembered commands

    Show all commands having the part known by you. Eg: apropos pdf | less Show Sample Output


    2
    apropos <part_rember> | less
    totti · 2011-08-19 19:34:57 6
  • Alternative for basename using grep to extract file name

    fileName /path/to/file.ext quivalent to basename /path/to/file.ext Show Sample Output


    -1
    fileName() { echo "$1" | grep -o "[^/]*$"; }
    totti · 2011-08-19 18:16:22 3
  • Boot block devices as virtual devices in Virtual Box

    eg: VBoxManage internalcommands createrawvmdk -filename ~/.VBox_sdc.vmdk -rawdisk /dev/sdc In order to start virtual box using block devices, ( Or to boot from it) run as ROOT sudo VirtualBox Then add & select the vmdk file as a device. At last Start the virtual box. - This cmd needs to run once for a device. - See command 8936 to run with out using ROOT power and easy handling of Virtual m/c


    0
    VBoxManage internalcommands createrawvmdk -filename [path/to/file/name.vmdk] -rawdisk /dev/[block_device]
    totti · 2011-08-19 14:26:22 8
  • Find all videos under current directory using MIME a.k.a not using extension

    Videos are found using their MIME type. Thus no need to for an extension for the video file. This is a efficent version of "jnash" cmd (4086). Thanks for jnash. This cmd will only show video files while his cmd show files having "video" anywhere in path. Show Sample Output


    1
    allVideos() { find ./ -type f -print0 | xargs -0 file -iNf - | grep ": video/" | cut -d: -f1; }
    totti · 2011-08-19 11:58:59 3
  • What is the use of this switch ?

    Find the usage of a switch with out searching through the entire man page. Usage: manswitch [cmd] [switch] Eg: manswitch grep silent ____________________________ In simple words man <cmd> | grep "\-<switch>" Eg: man grep | grep "\-o" This is not a standard method but works. Show Sample Output


    1
    manswitch() { man $1 | grep -A5 "^ *\-$2"; }
    totti · 2011-08-19 08:36:54 5
  • Sort output by column

    (separator = $IFS)


    2
    ps aux | sort -nk 6
    totti · 2011-08-16 11:04:45 3
  • Check if your webserver supports gzip compression with curl


    6
    curl -I -H "Accept-Encoding: gzip,deflate" http://example.org
    totti · 2011-08-16 10:32:01 4
  • Highlight network TX, RX information change


    5
    watch -n 2 -d '/sbin/ifconfig eth0'
    totti · 2011-08-16 10:29:34 4
  • Boot from a block device without giving root privilege to Virtual Box

    Usage: VBoxBlockBoot [Virtual_Machine] [Block_device] Eg: VBoxBlockBoot WinXP /dev/sdc In another words vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm Where vm --> Name of the virtual machine to start usb --> Block device to use. (/dev/sdc) This can used after setup up a boot loader on to my USB pen drive or HDD (After creating Live USB). Here root privilege is needed but not granted to Virtual Box. Thus we can access all our VM.( If we run VBox as root we can't access our VMs). Root privilege is used to - Unmount the storage device - Chmod to full access (777) Requirements:- 1. Device information file (rawvmdk file) created by the following command. Need to run only once. Not bad to run many. VBoxCreateRawDisk() { VBoxManage internalcommands createrawvmdk -filename ~/.rawHD4VB_`basename "$1"`.vmdk -rawdisk "$1"; } 2. Root privilege to umount & chmod 3. Real storage medium (ie /dev/*) (Non-virtual such as USB HD, pen drive, a partition) 4. A virtual m/c already available (here "usb") vm=usb; usb=sdc;sudo umount /dev/$usb* ; sudo chmod 777 /dev/$usb ; VBoxManage storageattach $vm --medium ~/raw-HD-4-VB/$usb.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm $vm VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1"; } Show Sample Output


    0
    VBoxBlockBoot() { sudo umount "$2"*; sudo chmod 777 "$2"; VBoxManage storageattach "$1" --medium ~/.rawHD4VB_`basename "$2"`.vmdk --type hdd --storagectl "IDE Controller" --device 0 --port 0 ; VBoxManage startvm "$1";}
    totti · 2011-07-29 13:04:19 4
  • ‹ First  < 2 3 4

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Add page numbers to a PDF
Put this code in a bash script. The script expects the PDF file as its only parameter. It will add a header to the PDF containing the page numbers and output it to a file with the suffix "-header.pdf" Requires enscript, ps2pdf and pdftk.

Your name backwards

test for ksh/bash
Dave Korn gave me this one. It works because ksh allows variable names ( w/o the $name syntax ) used by sh and bash. I wrote it to permit "single source" shell libraries; the current objective: every shell library may be sourced by either shell. see http://github.com/applemcg/backash

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Find the package that installed a command

extract element of xml
poor man's xml parser :)

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

convert a .wmv to a .avi

Displays user-defined ps output and pidstat output about the top CPU or MEMory users.
It grabs the PID's top resource users with $(ps -eo pid,pmem,pcpu| sort -k 3 -r|grep -v PID|head -10) The sort -k is sorting by the third field which would be CPU. Change this to 2 and it will sort accordingly. The rest of the command is just using diff to display the output of 2 commands side-by-side (-y flag) I chose some good ones for ps. pidstat comes with the sysstat package(sar, mpstat, iostat, pidstat) so if you don't have it, you should. I might should take off the timestamp... :|

Create Encrypted WordPress MySQL Backup without any DB details, just the wp-config.php
The coolest way I've found to backup a wordpress mysql database using encryption, and using local variables created directly from the wp-config.php file so that you don't have to type them- which would allow someone sniffing your terminal or viewing your shell history to see your info. I use a variation of this for my servers that have hundreds of wordpress installs and databases by using a find command for the wp-config.php file and passing that through xargs to my function.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: