Commands using printf (206)

  • Convert number of bytes to human readable filesize

    Converts a number of bytes provided as input, to a human readable number. Show Sample Output


    2
    human_filesize() { awk -v sum="$1" ' BEGIN {hum[1024^3]="Gb"; hum[1024^2]="Mb"; hum[1024]="Kb"; for (x=1024^3; x>=1024; x/=1024) { if (sum>=x) { printf "%.2f %s\n",sum/x,hum[x]; break; } } if (sum<1024) print "1kb"; } '}
    ArtBIT · 2011-12-02 18:21:20 3
  • Matrix Style

    Unlike other alternatives, this command only relies on bash builtins and should also work on windows platforms with the bash executable. Sparseness corresponds to the number 128 and can be adjusted. To print all possible digits instead of only 0 and 1 replace RANDOM%2 by RANDOM%10 or RANDOM%16 to add letters [A-F]. Show Sample Output


    2
    while true; do printf "\e[32m%X\e[0m" $((RANDOM%2)); for ((i=0; i<$((RANDOM%128)); i++)) do printf " "; done; done
    seb1245 · 2012-11-27 10:40:42 11
  • Print today's date in ISO format without calling an external command (bash 4)


    2
    today() { printf '%(%Y-%m-%d)T\n' -1; } ## bash-4
    cfajohnson · 2013-01-27 06:17:25 6
  • urlencoding with one pure BASH builtin

    opposite of https://www.commandlinefu.com/commands/view/10014/urldecoding-with-one-pure-bash-builtin ;-) Show Sample Output


    2
    function URLEncode { local dataLength="${#1}"; local index; for ((index = 0;index < dataLength;index++)); do local char="${1:index:1}"; case $char in [a-zA-Z0-9.~_-]) printf "$char"; ;; *) printf "%%%02X" "'$char"; ;; esac; done; }
    emphazer · 2018-09-14 12:08:10 357
  • draw line separator (using knoppix5 idea)


    2
    printf '*%.s' {1..40}; echo
    metropolis · 2019-07-01 07:41:18 48
  • seconds since epoch to ISO timestamp

    No need to use perl, awk, nor /usr/bin/date -- bash's "printf" builtin will do it. Show Sample Output


    2
    printf '%(%FT%T)T\n' 1606752450
    Mozai · 2021-06-20 05:11:20 176
  • Big (four-byte) $RANDOM

    Sometimes, in a shell script, you need a random number bigger than the range of $RANDOM. This will print a random number made of four hex values extracted from /dev/urandom. Show Sample Output


    1
    printf %d 0x`dd if=/dev/urandom bs=1 count=4 2>/dev/null | od -x | awk 'NR==1 {print $2$3}'`
    introp · 2009-02-18 16:23:09 6
  • Doing some floating point calculations with rounding (e.g. at the 3rd decimal)


    1
    echo '123/7' |bc -l |xargs printf "%.3f\n"
    mrttlemonde · 2009-03-18 14:20:32 5
  • get the ascii number with bash builtin printf


    1
    printf "%d\n" "'A" "'B"
    twfcc · 2009-10-17 09:50:44 4
  • Get decimal ascii code from character

    printf treats first char after single ' as numeric equivalent


    1
    ord() { printf "%d\n" "'$1"; }
    zude · 2009-10-17 22:02:52 3
  • Find all dot files and directories


    1
    printf "%s\n" .*
    cfajohnson · 2009-11-20 21:41:02 3
  • Configuring proxy client on terminal without leaving password on screen or in bash_history

    Prompts the user for username and password, that are then exported to http_proxy for use by wget, yum etc Default user, webproxy and port are used. Using this script prevent the cleartext user and pass being in your bash_history and on-screen Show Sample Output


    1
    set-proxy () { P=webproxy:1234; DU="fred"; read -p "username[$DU]:" USER; printf "%b"; UN=${USER:-$DU}; read -s -p "password:" PASS; printf "%b" "\n"; export http_proxy="http://${UN}:${PASS}@$P/"; export ftp_proxy="http://${UN}:${PASS}@$P/"; }
    shadycraig · 2010-02-04 13:12:59 5
  • Url Encode

    This one uses hex conversion to do the converting and is in shell/sed only (should probably still use the python/perl version).


    1
    uri_escape(){ echo -E "$@" | sed 's/\\/\\\\/g;s/./&\n/g' | while read -r i; do echo $i | grep -q '[a-zA-Z0-9/.:?&=]' && echo -n "$i" || printf %%%x \'"$i" done }
    infinull · 2010-02-13 01:39:51 41
  • shell function to underline a given string.

    underline() will print $1, followed by a series of '=' characters the width of $1. An optional second argument can be used to replace '=' with a given character. This function is useful for breaking lots of data emitted in a for loop into sections which are easier to parse visually. Let's say that 'xxxx' is a very common pattern occurring in a group of CSV files. You could run grep xxxx *.csv This would print the name of each csv file before each matching line, but the output would be hard to parse visually. for i in *.csv; do printf "\n"; underline $i; grep "xxxx" $i; done Will break the output into sections separated by the name of the file, underlined. Show Sample Output


    1
    underline() { echo $1; for (( i=0; $i<${#1}; i=$i+1)); do printf "${2:-=}"; done; printf "\n"; }
    bartonski · 2010-02-26 05:46:49 8
  • a function to create a box of '=' characters around a given string.

    The function 'box' takes either one or two arguments. The first argument is a line of text to be boxed, the second argument (optional) is a character to use to draw the box. By default, the drawing character will be '='. The function 'n()' is a helper function used to draw the upper and lower lines of the box, its arguments are a length, and an character to print. (I used 'n' because 'line', 'ln' and 'l' are all commonly used) Show Sample Output


    1
    box() { l=${#1}+4;x=${2:-=};n $l $x; echo "$x $1 $x"; n $l $x; }; n() { for (( i=0; $i<$1; i=$i+1)); do printf $2; done; printf "\n"; }
    bartonski · 2010-02-26 06:56:59 3
  • Get acurate memory usage of a Process in MegaBytes


    1
    pmap $(pgrep [ProcessName] -n) | gawk '/total/ { a=strtonum($2); b=int(a/1024); printf b};'
    lv4tech · 2010-04-28 08:16:28 3
  • Combines an arbitrary number of transparent png files into one file

    This one liner; combines all sequentially numbered files; in this example IMG_0001.png to IMG_1121.png by generating the shell script, making the shell script executable and then running the shell script to combine the 1121 png into a single png file named _final.png tested on Mac OS X 10.6.3 with ImageMagick 6.5.8-0 2009-11-22 Q16 http://www.imagemagick.org


    1
    echo -n "convert " > itcombino.sh; printf "IMG_%00004u.png " {1..1121} >> itcombino.sh; echo -n "-layers merge _final.png" >> itcombino.sh; chmod +x itcombino.sh && ./itcombino.sh
    IsraelTorres · 2010-05-22 03:56:30 5
  • create a new script, automatically populating the shebang line, editing the script, and making it executable.

    The first argument is the interpreter for your script, the second argument is the name of the script to create. Show Sample Output


    1
    shebang() { if i=$(which $1); then printf '#!%s\n\n' $i > $2 && vim + $2 && chmod 755 $2; else echo "'which' could not find $1, is it in your \$PATH?"; fi; }
    bartonski · 2011-03-09 14:47:32 25
  • Watch RX/TX rate of an interface in kb/s

    A shorter version Show Sample Output


    1
    while cat /proc/net/dev; do sleep 1; done | awk '/eth0/ {o1=n1; o2=n2; n1=$2; n2=$10; printf "in: %9.2f\t\tout: %9.2f\r", (n1-o1)/1024, (n2-o2)/1024}'
    quadcore · 2011-03-26 02:52:14 3
  • monitor your CPU core temperatures in real time

    Watch the temperatures of your CPU cores in real time at the command line. Press CONTROL+C to end. GORY DETAILS: Your computer needs to support sensors (many laptops, for example, do not). You'll need to install the lm-sensors package if it isn't already installed. And it helps to run the `sensors-detect` command to set up your sensor kernel modules first. At the very end of the sensors-detect interactive shell prompt, answer YES to add the new lines to the list of kernel modules loaded at boot. Show Sample Output


    1
    while :; do sensors|grep ^Core|while read x; do printf '% .23s\n' "$x"; done; sleep 1 && clear; done;
    linuxrawkstar · 2011-04-20 06:41:57 7
  • Colored status of running services

    Replace service --status-all 2>&1 by service --status-all 2>/dev/null to hide all services with the status [ ? ]


    1
    services() { printf "$(service --status-all 2>&1|sed -e 's/\[ + \]/\\E\[42m\[ + \]\\E\[0m/g' -e 's/\[ - \]/\\E\[41m\[ - \]\\E\[0m/g' -e 's/\[ ? \]/\\E\[43m\[ ? \]\\E\[0m/g')\n";}
    stanix · 2011-04-23 12:38:09 4
  • Scan for [samba|lanman] NetBIOS names and ip addresses in LAN by ARP.


    1
    arp-scan -I eth0 -l | perl -ne '/((\d{1,3}\.){3}\d{1,3})/ and $ip=$1 and $_=`nmblookup -A $ip` and /([[:alnum:]-]+)\s+<00>[^<]+<ACTIVE>/m and printf "%15s %s\n",$ip,$1'
    bandie91 · 2011-07-08 07:41:41 3
  • Generate a shortened URL with is.gd

    Check the API. You shouldn't need sed. The print-newline at the end is to prevent zsh from inserting a % after the end-of-output. Also works with http://v.gd Show Sample Output


    1
    isgd () { curl 'http://is.gd/create.php?format=simple&url='"$1" ; printf "\n" }
    dbbolton · 2011-08-14 23:31:39 3
  • One line Perl Script to determine the largest file sizes on a Linux Server

    This one line Perl script will display the smallest to the largest files sizes in all directories on a server. Show Sample Output


    1
    du -k | sort -n | perl -ne 'if ( /^(\d+)\s+(.*$)/){$l=log($1+.1);$m=int($l/log(1024)); printf ("%6.1f\t%s\t%25s %s\n",($1/(2**(10*$m))),(("K","M","G","T","P")[$m]),"*"x (1.5*$l),$2);}' | more
    Q_Element · 2012-02-07 15:49:19 10
  • Count all files in directories recursively with find

    Counts the files present in the different directories recursively. One only has to change maxdepth to have further insight in the directory hierarchy. Found at unix.stackexchange.com: http://unix.stackexchange.com/questions/4105/how-do-i-count-all-the-files-recursively-through-directories Show Sample Output


    1
    find -maxdepth 3 -type d | while read -r dir; do printf "%s:\t" "$dir"; find "$dir" | wc -l; done
    brainstorm · 2012-10-15 15:00:09 7
  • ‹ First  < 2 3 4 5 6 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Create a new file

Uniquely (sort of) color text so you can see changes
Colorify colors input by converting the text to a number and then performing modulo 7 on it. This resulting number is used as the color escape code. This can be used to color the results of commands with complex outputs (like "482279054165371") so if any of the digits change, there's a good chance the color will change too. I say good chance because there's only 7 unique colors here, so assuming you were watching random numbers, there would be a 6/7 chance that the color would change when the number changed. This should really only be used to help quickly identify when things change, but should not be the only thing relied upon to positively assert that an output has not changed.

Change the extension of a filename by using rename to convert
This will change all files ending in .JPG to .jpg and will work with any file extension

Customer Friendly free
makes more sense to customers XD

Convert decimal numbers to binary
Convert some decimal numbers to binary numbers. You could also build a general base-converter: $ function convBase { echo "ibase=$1; obase=$2; $3" | bc; } then you could write $ function decToBun { convBase 10 2 $1; }

Check a server is up. If it isn't mail me.
Alternative to the ping check if your firewall blocks ping. Uses curl to get the landing page silently, or fail with an error code. You can probably do this with wget as well.

Countdown Clock
The biggest advantage over atoponce's nifty original is not killing the scrollback. Written assuming bash, but shouldn't be terribly difficult to port to other shells. S should be multiple spaces, but I can't get commandlinefu to save/show them properly, any help?

List all installed kernels on Ubuntu except current one
Lists all installed kernels minus the current one. This is useful to uninstall older kernels that take too much space on /boot partition.

Find the package that installed a command

Alert visually until any key is pressed
I learned a few things reading this command. But I did run into a few issues: 1. On systems that don't use GNU echo (e.g. macOS 10.14.5 Mojave), the e option may not be supported. In this case ANSI escape codes will echoed as text and the terminal will not flash, like this: \e[?5h\e[38;5;1m A L E R T Thu Jun 20 16:31:29 PDT 2019 2. Since the read command strips\ignores leading backslashes, if a user types the backslash character once in the loop, it will not break. Typing backslash twice in a loop will break as expected. 3. The foreground color is set to red (\e[38;5;1m) on every loop. This could be set once before we call while, and then reset once when the loop breaks. 4. Instead of resetting the foreground color when it breaks, the video mode is set back to normal (\e[?5l). This has the effect of leaving the terminal text red until it is manually reset. The alternative I'm proposing here addresses these issues. I tested it on macOS and Arch Linux.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: