Commands using printf (206)

  • Convert number of bytes to human readable filesize

    Converts a number of bytes provided as input, to a human readable number. Show Sample Output


    2
    human_filesize() { awk -v sum="$1" ' BEGIN {hum[1024^3]="Gb"; hum[1024^2]="Mb"; hum[1024]="Kb"; for (x=1024^3; x>=1024; x/=1024) { if (sum>=x) { printf "%.2f %s\n",sum/x,hum[x]; break; } } if (sum<1024) print "1kb"; } '}
    ArtBIT · 2011-12-02 18:21:20 3
  • Matrix Style

    Unlike other alternatives, this command only relies on bash builtins and should also work on windows platforms with the bash executable. Sparseness corresponds to the number 128 and can be adjusted. To print all possible digits instead of only 0 and 1 replace RANDOM%2 by RANDOM%10 or RANDOM%16 to add letters [A-F]. Show Sample Output


    2
    while true; do printf "\e[32m%X\e[0m" $((RANDOM%2)); for ((i=0; i<$((RANDOM%128)); i++)) do printf " "; done; done
    seb1245 · 2012-11-27 10:40:42 11
  • Print today's date in ISO format without calling an external command (bash 4)


    2
    today() { printf '%(%Y-%m-%d)T\n' -1; } ## bash-4
    cfajohnson · 2013-01-27 06:17:25 6
  • urlencoding with one pure BASH builtin

    opposite of https://www.commandlinefu.com/commands/view/10014/urldecoding-with-one-pure-bash-builtin ;-) Show Sample Output


    2
    function URLEncode { local dataLength="${#1}"; local index; for ((index = 0;index < dataLength;index++)); do local char="${1:index:1}"; case $char in [a-zA-Z0-9.~_-]) printf "$char"; ;; *) printf "%%%02X" "'$char"; ;; esac; done; }
    emphazer · 2018-09-14 12:08:10 365
  • draw line separator (using knoppix5 idea)


    2
    printf '*%.s' {1..40}; echo
    metropolis · 2019-07-01 07:41:18 48
  • seconds since epoch to ISO timestamp

    No need to use perl, awk, nor /usr/bin/date -- bash's "printf" builtin will do it. Show Sample Output


    2
    printf '%(%FT%T)T\n' 1606752450
    Mozai · 2021-06-20 05:11:20 178
  • Big (four-byte) $RANDOM

    Sometimes, in a shell script, you need a random number bigger than the range of $RANDOM. This will print a random number made of four hex values extracted from /dev/urandom. Show Sample Output


    1
    printf %d 0x`dd if=/dev/urandom bs=1 count=4 2>/dev/null | od -x | awk 'NR==1 {print $2$3}'`
    introp · 2009-02-18 16:23:09 6
  • Doing some floating point calculations with rounding (e.g. at the 3rd decimal)


    1
    echo '123/7' |bc -l |xargs printf "%.3f\n"
    mrttlemonde · 2009-03-18 14:20:32 5
  • get the ascii number with bash builtin printf


    1
    printf "%d\n" "'A" "'B"
    twfcc · 2009-10-17 09:50:44 4
  • Get decimal ascii code from character

    printf treats first char after single ' as numeric equivalent


    1
    ord() { printf "%d\n" "'$1"; }
    zude · 2009-10-17 22:02:52 3
  • Find all dot files and directories


    1
    printf "%s\n" .*
    cfajohnson · 2009-11-20 21:41:02 3
  • Configuring proxy client on terminal without leaving password on screen or in bash_history

    Prompts the user for username and password, that are then exported to http_proxy for use by wget, yum etc Default user, webproxy and port are used. Using this script prevent the cleartext user and pass being in your bash_history and on-screen Show Sample Output


    1
    set-proxy () { P=webproxy:1234; DU="fred"; read -p "username[$DU]:" USER; printf "%b"; UN=${USER:-$DU}; read -s -p "password:" PASS; printf "%b" "\n"; export http_proxy="http://${UN}:${PASS}@$P/"; export ftp_proxy="http://${UN}:${PASS}@$P/"; }
    shadycraig · 2010-02-04 13:12:59 5
  • Url Encode

    This one uses hex conversion to do the converting and is in shell/sed only (should probably still use the python/perl version).


    1
    uri_escape(){ echo -E "$@" | sed 's/\\/\\\\/g;s/./&\n/g' | while read -r i; do echo $i | grep -q '[a-zA-Z0-9/.:?&=]' && echo -n "$i" || printf %%%x \'"$i" done }
    infinull · 2010-02-13 01:39:51 41
  • shell function to underline a given string.

    underline() will print $1, followed by a series of '=' characters the width of $1. An optional second argument can be used to replace '=' with a given character. This function is useful for breaking lots of data emitted in a for loop into sections which are easier to parse visually. Let's say that 'xxxx' is a very common pattern occurring in a group of CSV files. You could run grep xxxx *.csv This would print the name of each csv file before each matching line, but the output would be hard to parse visually. for i in *.csv; do printf "\n"; underline $i; grep "xxxx" $i; done Will break the output into sections separated by the name of the file, underlined. Show Sample Output


    1
    underline() { echo $1; for (( i=0; $i<${#1}; i=$i+1)); do printf "${2:-=}"; done; printf "\n"; }
    bartonski · 2010-02-26 05:46:49 8
  • a function to create a box of '=' characters around a given string.

    The function 'box' takes either one or two arguments. The first argument is a line of text to be boxed, the second argument (optional) is a character to use to draw the box. By default, the drawing character will be '='. The function 'n()' is a helper function used to draw the upper and lower lines of the box, its arguments are a length, and an character to print. (I used 'n' because 'line', 'ln' and 'l' are all commonly used) Show Sample Output


    1
    box() { l=${#1}+4;x=${2:-=};n $l $x; echo "$x $1 $x"; n $l $x; }; n() { for (( i=0; $i<$1; i=$i+1)); do printf $2; done; printf "\n"; }
    bartonski · 2010-02-26 06:56:59 3
  • Get acurate memory usage of a Process in MegaBytes


    1
    pmap $(pgrep [ProcessName] -n) | gawk '/total/ { a=strtonum($2); b=int(a/1024); printf b};'
    lv4tech · 2010-04-28 08:16:28 3
  • Combines an arbitrary number of transparent png files into one file

    This one liner; combines all sequentially numbered files; in this example IMG_0001.png to IMG_1121.png by generating the shell script, making the shell script executable and then running the shell script to combine the 1121 png into a single png file named _final.png tested on Mac OS X 10.6.3 with ImageMagick 6.5.8-0 2009-11-22 Q16 http://www.imagemagick.org


    1
    echo -n "convert " > itcombino.sh; printf "IMG_%00004u.png " {1..1121} >> itcombino.sh; echo -n "-layers merge _final.png" >> itcombino.sh; chmod +x itcombino.sh && ./itcombino.sh
    IsraelTorres · 2010-05-22 03:56:30 5
  • create a new script, automatically populating the shebang line, editing the script, and making it executable.

    The first argument is the interpreter for your script, the second argument is the name of the script to create. Show Sample Output


    1
    shebang() { if i=$(which $1); then printf '#!%s\n\n' $i > $2 && vim + $2 && chmod 755 $2; else echo "'which' could not find $1, is it in your \$PATH?"; fi; }
    bartonski · 2011-03-09 14:47:32 25
  • Watch RX/TX rate of an interface in kb/s

    A shorter version Show Sample Output


    1
    while cat /proc/net/dev; do sleep 1; done | awk '/eth0/ {o1=n1; o2=n2; n1=$2; n2=$10; printf "in: %9.2f\t\tout: %9.2f\r", (n1-o1)/1024, (n2-o2)/1024}'
    quadcore · 2011-03-26 02:52:14 3
  • monitor your CPU core temperatures in real time

    Watch the temperatures of your CPU cores in real time at the command line. Press CONTROL+C to end. GORY DETAILS: Your computer needs to support sensors (many laptops, for example, do not). You'll need to install the lm-sensors package if it isn't already installed. And it helps to run the `sensors-detect` command to set up your sensor kernel modules first. At the very end of the sensors-detect interactive shell prompt, answer YES to add the new lines to the list of kernel modules loaded at boot. Show Sample Output


    1
    while :; do sensors|grep ^Core|while read x; do printf '% .23s\n' "$x"; done; sleep 1 && clear; done;
    linuxrawkstar · 2011-04-20 06:41:57 7
  • Colored status of running services

    Replace service --status-all 2>&1 by service --status-all 2>/dev/null to hide all services with the status [ ? ]


    1
    services() { printf "$(service --status-all 2>&1|sed -e 's/\[ + \]/\\E\[42m\[ + \]\\E\[0m/g' -e 's/\[ - \]/\\E\[41m\[ - \]\\E\[0m/g' -e 's/\[ ? \]/\\E\[43m\[ ? \]\\E\[0m/g')\n";}
    stanix · 2011-04-23 12:38:09 4
  • Scan for [samba|lanman] NetBIOS names and ip addresses in LAN by ARP.


    1
    arp-scan -I eth0 -l | perl -ne '/((\d{1,3}\.){3}\d{1,3})/ and $ip=$1 and $_=`nmblookup -A $ip` and /([[:alnum:]-]+)\s+<00>[^<]+<ACTIVE>/m and printf "%15s %s\n",$ip,$1'
    bandie91 · 2011-07-08 07:41:41 3
  • Generate a shortened URL with is.gd

    Check the API. You shouldn't need sed. The print-newline at the end is to prevent zsh from inserting a % after the end-of-output. Also works with http://v.gd Show Sample Output


    1
    isgd () { curl 'http://is.gd/create.php?format=simple&url='"$1" ; printf "\n" }
    dbbolton · 2011-08-14 23:31:39 3
  • One line Perl Script to determine the largest file sizes on a Linux Server

    This one line Perl script will display the smallest to the largest files sizes in all directories on a server. Show Sample Output


    1
    du -k | sort -n | perl -ne 'if ( /^(\d+)\s+(.*$)/){$l=log($1+.1);$m=int($l/log(1024)); printf ("%6.1f\t%s\t%25s %s\n",($1/(2**(10*$m))),(("K","M","G","T","P")[$m]),"*"x (1.5*$l),$2);}' | more
    Q_Element · 2012-02-07 15:49:19 10
  • Count all files in directories recursively with find

    Counts the files present in the different directories recursively. One only has to change maxdepth to have further insight in the directory hierarchy. Found at unix.stackexchange.com: http://unix.stackexchange.com/questions/4105/how-do-i-count-all-the-files-recursively-through-directories Show Sample Output


    1
    find -maxdepth 3 -type d | while read -r dir; do printf "%s:\t" "$dir"; find "$dir" | wc -l; done
    brainstorm · 2012-10-15 15:00:09 7
  • ‹ First  < 2 3 4 5 6 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

list all files in a directory, sorted in reverse order by modification time, use file descriptors.
It's both silly, and infinitely useful. Especially useful in logfile directories where you want to know what file is being updated while troubleshooting.

Convert seconds to [DD:][HH:]MM:SS
Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

BASH: Print shell variable into AWK

See how many more processes are allowed, awesome!
There is a limit to how many processes you can run at the same time for each user, especially with web hosts. If the maximum # of processes for your user is 200, then the following sets OPTIMUM_P to 100. $ OPTIMUM_P=$(( (`ulimit -u` - `find /proc -maxdepth 1 \( -user $USER -o -group $GROUPNAME \) -type d|wc -l`) / 2 )) This is very useful in scripts because this is such a fast low-resource-intensive (compared to ps, who, lsof, etc) way to determine how many processes are currently running for whichever user. The number of currently running processes is subtracted from the high limit setup for the account (see limits.conf, pam, initscript). An easy to understand example- this searches the current directory for shell scripts, and runs up to 100 'file' commands at the same time, greatly speeding up the command. $ find . -type f | xargs -P $OPTIMUM_P -iFNAME file FNAME | sed -n '/shell script text/p' I am using it in my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html especially for the xargs command. Xargs has a -P option that lets you specify how many processes to run at the same time. For instance if you have 1000 urls in a text file and wanted to download all of them fast with curl, you could download 100 at a time (check ps output on a separate [pt]ty for proof) like this: $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' I like to do things as fast as possible on my servers. I have several types of servers and hosting environments, some with very restrictive jail shells with 20processes limit, some with 200, some with 8000, so for the jailed shells my xargs -P10 would kill my shell or dump core. Using the above I can set the -P value dynamically, so xargs always works, like this. $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' If you were building a process-killer (very common for cheap hosting) this would also be handy. Note that if you are only allowed 20 or so processes, you should just use -P1 with xargs.

Count the total number of files in each immediate subdirectory
counts the total (recursive) number of files in the immediate (depth 1) subdirectories as well as the current one and displays them sorted. Fixed, as per ashawley's comment

for too many arguments by *
$ grep ERROR *.log -bash: /bin/grep: Argument list too long $ echo *.log | xargs grep ERROR /dev/null 20090119.00011.log:DANGEROUS ERROR

get total of inodes of root partition

A signal trap that logs when your script was killed and what other processes were running at that time
trap is the bash builtin that allows you to execute commands when the current script receives a particular signal. Uses $0 for the script name, $$ for the script PID, tee to output to STDOUT as well as a log file and ps to log other running processes.

take a look to command before action
add |sh when you agree the list, I often use that method to prevent typos in dangerous or long operations

Get gzip compressed web page using wget.
Like the original command, but the -f allows this one to succeed even if the website returns uncompressed data. From gzip(1) on the -f flag: If the input data is not in a format recognized by gzip, and if the --stdout is also given, copy the input data without change to the standard output: let zcat behave as cat.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: