Commands tagged ssh sorted by votes

Commands tagged ssh (190)

sorted by

Removes single line from known_hosts file

Quickly remove the conflicting line (key) from current users known_hosts file when there is an SSH host conflict. Very nice when you get tired of writing out full commands. Ideally you would place this into your .bash_profile Usage: rhost [n] Example: rhost 33 (removes line 33 from ~/.ssh/known_hosts) Function assumes the $HOME exists, you could alternatively use "~/.ssh/known_hosts" Mac OSX likes a space for sed -i "$1" d
This is sample output - yours may be different.
-1

rhost() { if [[ $1 =~ ^[0-9]+$ ]]; then sed -i "$1"d ${HOME}/.ssh/known_hosts; else echo "rhost [n]"; fi }

lowjax · 2013-08-01 21:10:34 13
Keep SSH tunnel open (PostgreSQL example)

Check if SSH tunnel is open and open it, if it isn't. NB: In this example, 3333 would be your local port, 5432 the remote port (which is, afaik, usually used by PostgreSQL) and of course you should replace REMOTE_HOST with any valid IP or hostname. The example above let's you work on remote PostgreSQL databases from your local shell, like this: psql -E -h localhost -p 3333
This is sample output - yours may be different.
-1

while true; do nc -z localhost 3333 >|/dev/null || (ssh -NfL 3333:REMOTE_HOST:5432 USER@REMOTE_HOST); sleep 15; done

rxw · 2015-09-21 02:25:49 11
Echo the local IP addresses of the machines on your local network

If you need to ssh into a computer on the local network but you're unsure of the ip to use, then ping them and see if you get a response. If you do, print out the address you got it from. Adjust the range to suit your network.
This is sample output - yours may be different.
-2

for i in 192.168.1.{61..71};do ping -c 1 $i &> /dev/null && echo $i;fi;done

AlecSchueler · 2009-08-26 06:04:24 11
Automatd ssh public key setup without ssh-copy-id

Some servers don't have ssh-copy-id, this works in those cases. It will ask for the destination server, this can be IP, hostname, or user@hostname if different from current user. Ssh keygen will let you know if a pubkey already exists on your system and you can opt to not overwrite it.
This is sample output - yours may be different.
-2

echo 'Host or User@Host?:'; read newserver && ssh-keygen -N "" -t rsa -f ~/.ssh/id_rsa ; ssh $newserver cat <~/.ssh/id_rsa.pub ">>" ~/.ssh/authorized_keys ; ssh $newserver

alf · 2010-05-07 06:24:53 4
Enable tab completion for known SSH hosts
This is sample output - yours may be different.
-2

complete -W "$(echo `cat ~/.ssh/known_hosts | cut -f 1 -d ' ' | sed -e s/,.*//g | uniq | grep -v "\["`;)" ssh

sammcj · 2011-06-01 23:21:06 5
Forward remote server CUPS port to localhost
This is sample output - yours may be different.
-2

ssh -NL 12345:localhost:631 username@remote_server

shawn_abdushakur · 2014-02-25 15:49:34 6
having root on server, add user's public key to his keys (no password required)
This is sample output - yours may be different.
-2

cat user_public_key.pub | ssh root@<host> "cat | su -c 'mkdir -m 700 -p ~/.ssh && cat >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys' <user>"

noisy · 2016-05-09 08:48:40 14
How to run a specific command in remote server by ssh

Once it is connected to the remote server by that ssh protocol,the mentioned command will start working on that server.
This is sample output - yours may be different.
-3

ssh user@remotehost [anycommand](i.e uptime,w)

unixbhaskar · 2009-08-29 04:27:37 7
SSH RPC (transparently run command on remote host)

It's useful mostly for your custom scripts, which running on specific host and tired on ssh'ing every time when you need one simple command (i use it for update remote apt repository, when new package have to be downloaded from another host). Don't forget to set up authorization by keys, for maximum comfort. Show Sample Output
This is sample output - yours may be different.
```
# before 
home
# after
work
```
-3

echo -e '#!/bin/bash\nssh remote-user@remote-host $0 "$@"' >> /usr/local/bin/ssh-rpc; chmod +x /usr/local/bin/ssh-rpc; ln -s hostname /usr/local/bin/ssh-rpc; hostname

mechmind · 2011-12-28 17:43:34 8
show you the time when you lost the remote server.

Run this within a steady screen session. You can get the approximate time when the remote server went down or other abnormal behavior.
This is sample output - yours may be different.
-3

ssh remotehosts;date

kiiwii · 2012-11-09 01:14:24 4
Copy ssh keys to user@host to enable password-less ssh logins.
This is sample output - yours may be different.
-3

ssh-copy-id [-i [identity_file]] [user@]machine

www · 2012-12-08 19:48:19 6
Download a file securely via a remote SSH server
This is sample output - yours may be different.
-4

scp $user@$server:$path/to/file .

burned · 2010-08-02 16:26:10 4
Execute sudo command remotely with ssh

This command will ask for remote sudo password before executing a remote command.
This is sample output - yours may be different.
-4

ssh -t myserver.org 'sudo ls /etc'

patko · 2013-04-09 04:23:37 10
analyze traffic remotely over ssh w/ wireshark

This allows you to display the wireshark program running on remote pc to your local pc.
This is sample output - yours may be different.
-8

sudo ssh -Y remoteuser@remotehost sudo wireshark

Code_Bleu · 2010-01-05 14:35:20 3
Ultra shortcut for ssh root@

When you have to manage lot of servers, it's boring to type ssh root@myhost for each connection. Now you can type juste "s someting" and you are connected. You can too add bash_completion script to complet with tab the name of your servers. This will be the next tips from me ;) Show Sample Output
This is sample output - yours may be different.
```
user@localhost:~$ s myhost
Last login: Mon May  4 15:16:18 2009 from 10.40.29.72
[root@myhost ~]#
```
-20

alias s='ssh -l root'

GouNiNi · 2009-05-07 15:57:12 11
‹ First < 6 7 8

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Advanced python tracing

Trace python statement execution and syscalls invoked during that simultaneously

Get backup from remote host, then expand in current directory using tar

kde4 lock screen command

If you wish to launch the kde4 screen saver without the password prompt to exit, use this command: $ qdbus org.freedesktop.ScreenSaver /ScreenSaver org.freedesktop.ScreenSaver.SetActive True Also can be done with: $ /usr/lib/kde4/libexec/kscreenlocker --forcelock

Know SELinux status

Usefule to check whether SELinux is in force or disabled. Though you need to be superuser while execute this command.

copy public key

Collect a lot of icons from /usr/share/icons (may overwrite some, and complain a bit)

Today I needed to choose an icon for an app. My simpler way: put all of /usr/share/icons in myicons folder and brows'em with nautilus. Then rm -r 'ed the entire dir.

Countdown Clock

The biggest advantage over atoponce's nifty original is not killing the scrollback. Written assuming bash, but shouldn't be terribly difficult to port to other shells. S should be multiple spaces, but I can't get commandlinefu to save/show them properly, any help?

GRUB2: set Super Mario as startup tune

I'll let Slayer handle that. Raining Blood for your pleasure.

Define shell variable HISTIGNORE so that comments (lines starting with #) appear in shell history

I was surprised to find that with RedHat bash, I could not find any comment lines (begining with #) in my bash shell history. Surprised because in Mageia Linux this works. It turns out that RedHat's bash will keep comment lines if in my .bashrc, I define: export HISTIGNORE=' cd "`*: PROMPT_COMMAND=?*?' Why have comment lines in shell history? It's a handy and convenient way to make proto-commands (to be completed later) and for storing brief text data that is searchable in shell history.

Open in TextMate Sidebar files (recursively) with names matching REGEX_A and not matching REGEX_B

This does the following: 1 - Search recursively for files whose names match REGEX_A 2 - From this list exclude files whose names match REGEX_B 3 - Open this as a group in textmate (in the sidebar) And now you can use Command+Shift+F to use textmate own find and replace on this particular group of files. For advanced regex in the first expression you can use -regextype posix-egrep like this: mate - `find * -type f -regextype posix-egrep -regex 'REGEX_A' | grep -v -E 'REGEX_B'` Warning: this is not ment to open files or folders with space os special characters in the filename. If anyone knows a solution to that, tell me so I can fix the line.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands tagged ssh

Commands tagged ssh (190) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands tagged ssh (190)

sorted by