Commands tagged ssh sorted by votes

Commands tagged ssh (190)

sorted by

Removes single line from known_hosts file

Quickly remove the conflicting line (key) from current users known_hosts file when there is an SSH host conflict. Very nice when you get tired of writing out full commands. Ideally you would place this into your .bash_profile Usage: rhost [n] Example: rhost 33 (removes line 33 from ~/.ssh/known_hosts) Function assumes the $HOME exists, you could alternatively use "~/.ssh/known_hosts" Mac OSX likes a space for sed -i "$1" d
This is sample output - yours may be different.
-1

rhost() { if [[ $1 =~ ^[0-9]+$ ]]; then sed -i "$1"d ${HOME}/.ssh/known_hosts; else echo "rhost [n]"; fi }

lowjax · 2013-08-01 21:10:34 13
Keep SSH tunnel open (PostgreSQL example)

Check if SSH tunnel is open and open it, if it isn't. NB: In this example, 3333 would be your local port, 5432 the remote port (which is, afaik, usually used by PostgreSQL) and of course you should replace REMOTE_HOST with any valid IP or hostname. The example above let's you work on remote PostgreSQL databases from your local shell, like this: psql -E -h localhost -p 3333
This is sample output - yours may be different.
-1

while true; do nc -z localhost 3333 >|/dev/null || (ssh -NfL 3333:REMOTE_HOST:5432 USER@REMOTE_HOST); sleep 15; done

rxw · 2015-09-21 02:25:49 11
Echo the local IP addresses of the machines on your local network

If you need to ssh into a computer on the local network but you're unsure of the ip to use, then ping them and see if you get a response. If you do, print out the address you got it from. Adjust the range to suit your network.
This is sample output - yours may be different.
-2

for i in 192.168.1.{61..71};do ping -c 1 $i &> /dev/null && echo $i;fi;done

AlecSchueler · 2009-08-26 06:04:24 11
Automatd ssh public key setup without ssh-copy-id

Some servers don't have ssh-copy-id, this works in those cases. It will ask for the destination server, this can be IP, hostname, or user@hostname if different from current user. Ssh keygen will let you know if a pubkey already exists on your system and you can opt to not overwrite it.
This is sample output - yours may be different.
-2

echo 'Host or User@Host?:'; read newserver && ssh-keygen -N "" -t rsa -f ~/.ssh/id_rsa ; ssh $newserver cat <~/.ssh/id_rsa.pub ">>" ~/.ssh/authorized_keys ; ssh $newserver

alf · 2010-05-07 06:24:53 4
Enable tab completion for known SSH hosts
This is sample output - yours may be different.
-2

complete -W "$(echo `cat ~/.ssh/known_hosts | cut -f 1 -d ' ' | sed -e s/,.*//g | uniq | grep -v "\["`;)" ssh

sammcj · 2011-06-01 23:21:06 5
Forward remote server CUPS port to localhost
This is sample output - yours may be different.
-2

ssh -NL 12345:localhost:631 username@remote_server

shawn_abdushakur · 2014-02-25 15:49:34 6
having root on server, add user's public key to his keys (no password required)
This is sample output - yours may be different.
-2

cat user_public_key.pub | ssh root@<host> "cat | su -c 'mkdir -m 700 -p ~/.ssh && cat >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys' <user>"

noisy · 2016-05-09 08:48:40 14
How to run a specific command in remote server by ssh

Once it is connected to the remote server by that ssh protocol,the mentioned command will start working on that server.
This is sample output - yours may be different.
-3

ssh user@remotehost [anycommand](i.e uptime,w)

unixbhaskar · 2009-08-29 04:27:37 7
SSH RPC (transparently run command on remote host)

It's useful mostly for your custom scripts, which running on specific host and tired on ssh'ing every time when you need one simple command (i use it for update remote apt repository, when new package have to be downloaded from another host). Don't forget to set up authorization by keys, for maximum comfort. Show Sample Output
This is sample output - yours may be different.
```
# before 
home
# after
work
```
-3

echo -e '#!/bin/bash\nssh remote-user@remote-host $0 "$@"' >> /usr/local/bin/ssh-rpc; chmod +x /usr/local/bin/ssh-rpc; ln -s hostname /usr/local/bin/ssh-rpc; hostname

mechmind · 2011-12-28 17:43:34 8
show you the time when you lost the remote server.

Run this within a steady screen session. You can get the approximate time when the remote server went down or other abnormal behavior.
This is sample output - yours may be different.
-3

ssh remotehosts;date

kiiwii · 2012-11-09 01:14:24 4
Copy ssh keys to user@host to enable password-less ssh logins.
This is sample output - yours may be different.
-3

ssh-copy-id [-i [identity_file]] [user@]machine

www · 2012-12-08 19:48:19 6
Download a file securely via a remote SSH server
This is sample output - yours may be different.
-4

scp $user@$server:$path/to/file .

burned · 2010-08-02 16:26:10 4
Execute sudo command remotely with ssh

This command will ask for remote sudo password before executing a remote command.
This is sample output - yours may be different.
-4

ssh -t myserver.org 'sudo ls /etc'

patko · 2013-04-09 04:23:37 10
analyze traffic remotely over ssh w/ wireshark

This allows you to display the wireshark program running on remote pc to your local pc.
This is sample output - yours may be different.
-8

sudo ssh -Y remoteuser@remotehost sudo wireshark

Code_Bleu · 2010-01-05 14:35:20 3
Ultra shortcut for ssh root@

When you have to manage lot of servers, it's boring to type ssh root@myhost for each connection. Now you can type juste "s someting" and you are connected. You can too add bash_completion script to complet with tab the name of your servers. This will be the next tips from me ;) Show Sample Output
This is sample output - yours may be different.
```
user@localhost:~$ s myhost
Last login: Mon May  4 15:16:18 2009 from 10.40.29.72
[root@myhost ~]#
```
-20

alias s='ssh -l root'

GouNiNi · 2009-05-07 15:57:12 11
‹ First < 6 7 8

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

know the current running shell (the true)

Return the current shell. It is better than print $SHELL which can sometimes return a false value.

Lists installed kernels

no need for rpm, no need for piping to another command. also no real fu but lacking in unnecessary complexity and distro specific commands.

pushd rotates the stack so that the second directory comes at the top.

'pushd +1' is equivalent to 'pushd'. Can be 'pushd +3' or more generaly 'pushd +N'. Can also be 'pushd -N'. More description in 'man bash'.

Show current iptables rules, with line numbers

Delete all files found in directory A from directory B

This command is useful if you accidentally untar or unzip an archive in a directory and you want to automatically remove the files. Just untar the files again in a subdirectory and then run the above command e.g. $ for file in ~/Desktop/temp/*; do rm ~/Desktop/`basename $file`; done

Count the number of characters in a string from the standard input.

Create a backup of the file.

It will create a backup of the filename. The advantage is that if you list the folder the backups will be sorted by date. The command works on any unix in bash.

Print just line 4 from a textfile

Prints the 4th line and then quits. (Credit goes to flatcap in comments: http://www.commandlinefu.com/commands/view/6031/print-just-line-4-from-a-textfile#comment.)

Run a program transparently, but print a stack trace if it fails

For automated unit tests I wanted my program to run normally, but if it crashed, to add a stack trace to the output log. I came up with this command so I wouldn't have to mess around with core files. The one downside is that it does smoosh your program's stderr and stdout together.

Expand shortened URLs

This relies on a public API from http://longurl.org. So, this has the weakness that if the service disappears, the function will break. However, it has the advantage that the shortened URL service will not be tracking your IP address and other metrics, but instead will track longurl.org. Thus, you can remain anonymous from the shortened URL services (although not anonymous from longurl.org). It does no sanity checking that you have provided an argument. If you do not provide one, "message" is displayed to STDOUT.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands tagged ssh

Commands tagged ssh (190) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands tagged ssh (190)

sorted by