All commands (14,187)

  • Testing ftp server status

    I must monitorize a couple of ftp servers every morning WITHOUT a port-scanner Instead of ftp'ing on 100 ftp servers manually to test their status I use this loop. It might be adaptable to other services, however it may require a 'logout' string instead of 'quit'. The file ftps.txt contains the full list of ftp servers to monitorize.


    1
    for host in $(cat ftps.txt) ; do if echo -en "o $host 21\nquit\n" |telnet 2>/dev/null |grep -v 'Connected to' >/dev/null; then echo -en "FTP $host KO\n"; fi done
    vlan7 · 2010-01-26 15:34:18 3
  • Recursively grep thorugh directory for string in file.

    Recursive grep through directory for file.


    -5
    find directory/ |xargs grep -i "phrase"
    tuxtutorials · 2010-01-26 14:56:56 3
  • Do some learning...

    no loop, only one call of grep, scrollable ("less is more", more or less...)


    12
    ls /usr/bin | xargs whatis | grep -v nothing | less
    michelsberg · 2010-01-26 12:59:47 32
  • Copy all JAR files to folder /tmp

    Useful for Maven multimodule projects, where you want to extract all packaged jar files.


    -3
    find . -iname "*.jar" -exec cp '{}' /tmp/ \;
    unixmonkey6754 · 2010-01-26 12:19:15 3
  • Copy specific files recursively using the same tree organization.

    This command has been used to overwrite corrupted "entries" files of a corrupted subversion working copy. Note the --files-from input format.


    3
    rsync -vd --files-from=<(find . -name entries -print ) . ../target_directory
    samyboy · 2010-01-26 09:41:12 6
  • Toggle the Touchpad on or off

    This command toggles the touchpad on and off, when it's on, the right side scroll strip (annoying) and the tap-clicking are disabled, you can change this by changing occurances of 2 in the command to 0. this whole command can then be given a keyboard shortcut so that the touchpad is disableable without using a special fn key (which linux doesn't recognize on some computers) or a seperate button.


    -3
    if [ $(synclient -l | grep TouchpadOff | awk '{print $3}') = "2" ]; then synclient TouchpadOff=1; elif [ $(synclient -l | grep TouchpadOff | awk '{print $3}') == "1" ]; then synclient TouchpadOff=2; else synclient TouchpadOff=2; fi
    GinoMan2440 · 2010-01-26 07:52:55 5
  • Convert all old SVN repositories in one directory to new format


    1
    find . -maxdepth 1 -type d -exec 'mv "{}" "{}-old" && svnadmin create "{}" && svnadmin recover "{}-old" && svnadmin dump "{}-old" | svnadmin load "{}" && rm -rf "{}-old"' \;
    raspi · 2010-01-26 07:06:43 3
  • Do some learning...


    7
    for i in $(ls /usr/bin); do whatis $i | grep -v nothing; done | more
    Abiden · 2010-01-26 06:15:54 7
  • Extract all 7zip files in current directory taking filename spaces into account


    -2
    7za x \*.zip
    andrew112358 · 2010-01-25 21:50:15 2
  • Fast tape rewind

    Traditionally we rewind a tape using this syntaxis: mt -f /dev/rmt/0cbn rewind Redirecting the dispositive to nothing as shown above is faster. Less typing is always better.


    2
    < /dev/rmt/0cbn
    vlan7 · 2010-01-25 20:32:38 3
  • Rename all the files in the current directory into their sha1sum


    -1
    find . -maxdepth 1 -type f| xargs sha1sum | sed 's/^\(\w*\)\s*\(.*\)/\2 \1/' | while read LINE; do mv $LINE; done
    foremire · 2010-01-25 20:21:01 11
  • Insert the last argument of the previous command

    for example if you did a: ls -la /bin/ls then ls !$ is equivalent to doing a ls /bin/ls


    9
    !$
    ringlerun · 2010-01-24 17:59:52 23
  • Top Command in batch mode

    running top command in batch mode. it is usefull if you want to redirect the output in a file. Show Sample Output


    2
    top -b -n 1
    r00t4u · 2010-01-24 16:17:30 5
  • Delete residues configuration files


    0
    dpkg -l | grep ^rc | awk '{print $2}' | sudo xargs dpkg -P
    kayowas · 2010-01-24 14:23:37 4
  • Extract all 7zip files in current directory taking filename spaces into account

    Use find's built-in ability to call programs. Alternatively, find -maxdepth 1 -type f -name "*.7z" -print0 | xargx -0 -n 1 7zr e would work, too.


    -1
    find -maxdepth 1 -type f -name "*.7z" -exec 7zr e '{}' ';'
    minnmass · 2010-01-23 19:50:10 4
  • Count files created by date/modification


    0
    find . -type f -exec stat \{\} \; | grep Modify: | awk '{a[$2]++}END{for(i in a){print i " : " a[i] }}' | sort
    pepin · 2010-01-23 07:55:16 6
  • Restore the keyboard for qwerty users.

    Restores the keyboard so your partner who expects the keys to correspond to what they're labelled can type (in qwerty).


    -2
    setxkbmap us
    keturn · 2010-01-23 04:08:46 4
  • Set X keymap to dvorak and fix the Ctrl key.

    What to type to fix the keyboard when it's all qwerty and/or the modifier key to the left of the 'a' is doing something unexpected. In addition, I've also been known to use the altwin:meta_win and compose:ralt flags.


    0
    setxkbmap dvorak '' ctrl:nocaps
    keturn · 2010-01-23 04:04:59 3
  • A command to post a message to Twitter that includes your geo-location and a short URL.

    A command to post a message to Twitter that includes your geo-location and a short URL. The link shortening service is provide by TinyURL, the geo-location service is provided by HostIP and the IP address lookup service is provided by AppSpot. This is an upgrade of an of one of my previous contributions: http://tinyurl.com/yd2xtzv.


    4
    curl --user "USERNAME:PASSWORD" -d status="MESSAGE_GOES_HERE $(curl -s tinyurl.com/api-create.php?url=URL_GOES_HERE) $(curl -s api.hostip.info/get_html.php?ip=$(curl ip.appspot.com))" -d source="cURL" twitter.com/statuses/update.json -o /dev/null
    o0110o · 2010-01-23 02:21:57 11
  • Upload file to remote server using SCP


    -7
    scp /home/svnlabs.txt root@92.178.0.56:/home/
    bakhru · 2010-01-22 21:19:37 5
  • Find unused IPs on a given subnet


    10
    nmap -T4 -sP 192.168.2.0/24 && egrep "00:00:00:00:00:00" /proc/net/arp
    wincus · 2010-01-22 20:36:43 8
  • Extract all 7zip files in current directory taking filename spaces into account


    3
    for file in *.7z; do 7zr e "$file"; done
    jmcantrell · 2010-01-22 18:42:20 11
  • Upload - rsync using key pair

    Connect EC2 server with public keys "/root/.ec2/id_rsa-gsg-keypair" or "/root/.ec2/keypair.pem"


    -2
    rsync -avvvz -e "ssh -i /root/.ec2/id_rsa-gsg-keypair" --archive --progress /root/.ec2/id_rsa-gsg-keypair root@ec2-75-101-212-113.compute-1.amazonaws.com:/root
    lalit241 · 2010-01-22 17:21:58 3
  • Upload file to remote server using SCP

    Upload file to remote server using SCP


    -9
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    lalit241 · 2010-01-22 17:21:07 3
  • Upload file to remote server using SCP

    Upload file to remote server using SCP


    -6
    scp -P 22 /home/svnlabs.txt root@92.178.0.56:/home/svnlabs.txt
    svnlabs · 2010-01-22 16:55:25 4
  • ‹ First  < 406 407 408 409 410 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Get AWS temporary credentials ready to export based on a MFA virtual appliance
You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

merge pdf using bash brace exansion
merge pdf from pg_0001.pdf until pg_0009.pdf into MyFile.pdf

ptree equivalent in HP-UX
By setting the UNIX95 variable in HP-UX the XPG4 mode is activated, you get new options for ps and other commands, for me the best way to use this is to create an alias named ptree in root profile: alias ptree='UNIX95=1 ps -eH'

Find the package that installed a command

List complete size of directories (do not consider hidden directories)
why make it complicated ? : ] -------------------- I just noticed someone else has posted this on this site before me (sorry I am now a duplicate :/) http://www.commandlinefu.com/commands/view/4313

See how many more processes are allowed, awesome!
There is a limit to how many processes you can run at the same time for each user, especially with web hosts. If the maximum # of processes for your user is 200, then the following sets OPTIMUM_P to 100. $ OPTIMUM_P=$(( (`ulimit -u` - `find /proc -maxdepth 1 \( -user $USER -o -group $GROUPNAME \) -type d|wc -l`) / 2 )) This is very useful in scripts because this is such a fast low-resource-intensive (compared to ps, who, lsof, etc) way to determine how many processes are currently running for whichever user. The number of currently running processes is subtracted from the high limit setup for the account (see limits.conf, pam, initscript). An easy to understand example- this searches the current directory for shell scripts, and runs up to 100 'file' commands at the same time, greatly speeding up the command. $ find . -type f | xargs -P $OPTIMUM_P -iFNAME file FNAME | sed -n '/shell script text/p' I am using it in my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html especially for the xargs command. Xargs has a -P option that lets you specify how many processes to run at the same time. For instance if you have 1000 urls in a text file and wanted to download all of them fast with curl, you could download 100 at a time (check ps output on a separate [pt]ty for proof) like this: $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' I like to do things as fast as possible on my servers. I have several types of servers and hosting environments, some with very restrictive jail shells with 20processes limit, some with 200, some with 8000, so for the jailed shells my xargs -P10 would kill my shell or dump core. Using the above I can set the -P value dynamically, so xargs always works, like this. $ cat url-list.txt | xargs -I '{}' -P $OPTIMUM_P curl -O '{}' If you were building a process-killer (very common for cheap hosting) this would also be handy. Note that if you are only allowed 20 or so processes, you should just use -P1 with xargs.

Which processes are listening on a specific port (e.g. port 80)
swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Read and write to TCP or UDP sockets with common bash tools
Ever needed to test firewalls but didn't have netcat, telnet or even FTP? Enter /dev/tcp, your new best friend. /dev/tcp/(hostname)/(port) is a bash builtin that bash can use to open connections to TCP and UDP ports. This one-liner opens a connection on a port to a server and lets you read and write to it from the terminal. How it works: First, exec sets up a redirect for /dev/tcp/$server/$port to file descriptor 5. Then, as per some excellent feedback from @flatcap, we launch a redirect from file descriptor 5 to STDOUT and send that to the background (which is what causes the PID to be printed when the commands are run), and then redirect STDIN to file descriptor 5 with the second cat. Finally, when the second cat dies (the connection is closed), we clean up the file descriptor with 'exec 5>&-'. It can be used to test FTP, HTTP, NTP, or can connect to netcat listening on a port (makes for a simple chat client!) Replace /tcp/ with /udp/ to use UDP instead.

Install pip with Proxy
Installs pip packages defining a proxy

Fetch the current human population of Earth
Fetches the world population JSON data from the US census and parses it uses jshon

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: