Commands using sleep sorted by votes

Commands using sleep (289)

sorted by

Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando STAT
This is sample output - yours may be different.
-2

while true; do A=$(stat -c%s FILE); sleep 1; B=$(stat -c%s FILE); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:39:06 15
hardcode dnsserver, no more rewriting of etc/resolv.conf

runs in background rewriting /etc/resolv.conf periodically dns
This is sample output - yours may be different.
-2

while sudo sed -i -e 's/^$nameserver$.*$/\1 $dns/' /etc/resolv.conf; do sleep 15; done &

dav23r · 2018-05-14 16:03:08 160
if you are alone and have to determine which switch port your server ends ... here we go

use this comand to see which switch port your network interface is using. but remind, there is no network traffic for 10 minutes or how long you run the comand. if you start the comand via ssh, port will come up again after the "for loop" has endet
This is sample output - yours may be different.
-3

for i in $(seq 300) ; do ethtool -s eth0 autoneg on ; sleep 2 ; done

christian773 · 2010-10-31 18:15:54 4
Power Supply Triggered Alert

Checks whether your power supply is still plugged in. If not it will trigger an alarm at maximum volume. Show Sample Output
This is sample output - yours may be different.
```
run this in a screen and unplug your headphones.
```
-3

check(){ power=$(acpi -a) ; if [[ $power == *on-line* ]] ; then echo "supply is on"; else echo "somebody is steeling your laptop"; amixer -c0 set Master 100+ unmute ; mpg123 nuclear-alarm.mp3 ; fi } ;while true; do check ; sleep 2 ; done

hoodie · 2011-12-10 13:42:52 4
Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando LS + AWK Show Sample Output
This is sample output - yours may be different.
```
18720 Bps
```
-3

while true; do A=$(ls -l FILE | awk '{print $5}'); sleep 1; B=$(ls -l FILE | awk '{print $5}'); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:33:02 13
See smbstatus all the time

See smbstatus Output within a 5 second interval (for monitoring smb access)
This is sample output - yours may be different.
-4

while (( $i != 0 )) { smbstatus; sleep 5; clear }

unixmonkey4084 · 2009-06-03 13:26:30 9
shutdown pc in a 4 hours
This is sample output - yours may be different.
-4

sleep 4h && halt

javisol · 2011-05-02 13:46:30 3
Polls fos network port usage
This is sample output - yours may be different.
-4

while sleep 1; do date; (netstat -a -n | grep 80) ; done

hute37 · 2011-05-16 07:56:56 5
Listen to the OS X system's voices

Listen to different voices in the system--useful for picking the voice you like
This is sample output - yours may be different.
-5

for person in Alex Bruce Fred Kathy Vicki Victoria ; do say -v $person "Hello, my name is $person"; sleep 1; done

haivu · 2009-03-09 15:42:13 6
Periodically loop a command

You can use this to loop any command to periodically see the output. while true; do [YOUR COMMAND HERE]; sleep [# of seconds]; done; Alternatively, you can put it in a simple shell script to save typing! #/!bin/bash while true; do $1; sleep $2; done; /path/to/script.sh "ifconfig eth0 | grep 'inet addr:'" 60 Show Sample Output
This is sample output - yours may be different.
```
inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[... Ctrl+C to stop]
```
-5

while true; do ifconfig eth0 | grep "inet addr:"; sleep 60; done;

bandit36 · 2009-04-01 19:29:28 19
show space used by postgres

this command shows the space used in postgres directory. Show Sample Output
This is sample output - yours may be different.
```
4	./pg_twophase
5364	./base/17868
5268	./base/11563
5268	./base/1
114288	./base/11564
4	./base/pgsql_tmp
5736	./base/19846
135932	./base
268584	.
268584	total
```
-5

while (( 1==1 )); do du -c . >> output.log; sleep 2; done; tail -f output.log

aceiro · 2010-07-12 17:23:45 4
Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item

Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item enable auto loot and create macro, put mouse over slot on the bar /cast Prospecting /use Elementium Ore
This is sample output - yours may be different.
-5

while true; do sleep 4 ; xdotool click 1 ; done

rusino · 2011-09-23 09:23:02 4
Wait a moment and then Power off

If you are on your bed, waching a movie or if you are downloading something, but you whant to sleep. You can use these easy command to power off after X time. The time is in sec. if you whant to wait 1 H, use: sleep 3600; poweroff
This is sample output - yours may be different.
-11

sleep 10; poweroff

xmuda · 2013-04-13 22:07:15 6
Five Minutes To Go

command to turn off your computer when you go home and can not wait Show Sample Output
This is sample output - yours may be different.
```
5
4
3
2
1
0
bye, bye
```
-14

for i in $(seq 0 5) ; do echo "5 - $i" | bc -l ; sleep 60 ; done && echo "bye, bye" && shutdown -h now

arctarus · 2009-03-13 12:16:35 843
‹ First < 10 11 12

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Find usb device in realtime

Using this command you can track a moment when usb device was attached.

Protect directory from an overzealous rm -rf *

-R Recursively change attributes of directories and their contents. +i to set the immutable bit to prevent even root from erasing or changing the contents of a file.

Quick notepad

Quick write some notes to a file with cat. Ctrl+C when you have finish.

Network Proxy to dump the application level forward traffic in plain text in the console and in a file.

If you have a client that connects to a server via plain text protocol such as HTTP or FTP, with this command you can monitor the messages that the client sends to the server. Application level text stream will be dumped on the command line as well as saved in a file called proxy.txt. You have to change 8080 to the local port where you want your client to connect to. Change also 192.168.0.1 to the IP address of the destination server and 80 to the port of the destination server. Then simply point your client to localhost 8080 (or whatever you changed it to). The traffic will be redirected to host 192.168.0.1 on port 80 (or whatever you changed them to). Any requests from the client to the server will be dumped on the console as well as in the file "proxy.txt". Unfortunately the responses from the server will not be dumped.

switch case of a text file

To find the uptime of each process-id of particular service or process

Rename files in batch

strip config files of comments

some configuration files, particularly those installed by default as part of a package, have tons of comment lines, to help you know what's possible to configure, and what it means. That's nice, but sometimes you just want to see what specifically what _has_ been configured. That's when I use the above snippet, which I save as a bash alias 'nocom' (for 'no comments'). Apache default config files are perfect examples of when/why this script is handy.

Renames all files in the current directory such that the new file contains no space characters.

This is a better version, as it does no command piping, uses for instead of while loops, which allows for a list of files in the current working directory to be natively processed. It also uses the -v/verbose option with mv to let you know what the command is doing. While the command does exactly the same in a better way, I would modify the sed option to replace spaces with underscores instead, or dashes. Please note that you'll receive errors with this command as it tries to rename files that don't even have spaces. This is an alternative to: http://www.commandlinefu.com/commands/view/8761/renames-all-files-in-the-current-directory-such-that-the-new-file-contains-no-space-characters.

Watch the progress of 'dd'

The 'dd' command doesn't provide a progress when writing data. So, sending the "USR1" signal to the process will spit out its progress as it writes data. This command is superior to others on the site, as it doesn't require you to previously know the PID of the dd command.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sleep

Commands using sleep (289) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sleep (289)

sorted by