Commands using sleep sorted by votes

Commands using sleep (289)

sorted by

Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando STAT
This is sample output - yours may be different.
-2

while true; do A=$(stat -c%s FILE); sleep 1; B=$(stat -c%s FILE); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:39:06 15
hardcode dnsserver, no more rewriting of etc/resolv.conf

runs in background rewriting /etc/resolv.conf periodically dns
This is sample output - yours may be different.
-2

while sudo sed -i -e 's/^$nameserver$.*$/\1 $dns/' /etc/resolv.conf; do sleep 15; done &

dav23r · 2018-05-14 16:03:08 154
if you are alone and have to determine which switch port your server ends ... here we go

use this comand to see which switch port your network interface is using. but remind, there is no network traffic for 10 minutes or how long you run the comand. if you start the comand via ssh, port will come up again after the "for loop" has endet
This is sample output - yours may be different.
-3

for i in $(seq 300) ; do ethtool -s eth0 autoneg on ; sleep 2 ; done

christian773 · 2010-10-31 18:15:54 4
Power Supply Triggered Alert

Checks whether your power supply is still plugged in. If not it will trigger an alarm at maximum volume. Show Sample Output
This is sample output - yours may be different.
```
run this in a screen and unplug your headphones.
```
-3

check(){ power=$(acpi -a) ; if [[ $power == *on-line* ]] ; then echo "supply is on"; else echo "somebody is steeling your laptop"; amixer -c0 set Master 100+ unmute ; mpg123 nuclear-alarm.mp3 ; fi } ;while true; do check ; sleep 2 ; done

hoodie · 2011-12-10 13:42:52 4
Muestra el crecimiento de un archivo por segundo

Muestra el crecimiento de un archivo por segundo. Cambia el texto "FILE" por el nombre del archivo a monitorear. Comando LS + AWK Show Sample Output
This is sample output - yours may be different.
```
18720 Bps
```
-3

while true; do A=$(ls -l FILE | awk '{print $5}'); sleep 1; B=$(ls -l FILE | awk '{print $5}'); echo -en "\r"$(($B-$A))" Bps"; done

Zort · 2016-06-27 20:33:02 13
See smbstatus all the time

See smbstatus Output within a 5 second interval (for monitoring smb access)
This is sample output - yours may be different.
-4

while (( $i != 0 )) { smbstatus; sleep 5; clear }

unixmonkey4084 · 2009-06-03 13:26:30 9
shutdown pc in a 4 hours
This is sample output - yours may be different.
-4

sleep 4h && halt

javisol · 2011-05-02 13:46:30 3
Polls fos network port usage
This is sample output - yours may be different.
-4

while sleep 1; do date; (netstat -a -n | grep 80) ; done

hute37 · 2011-05-16 07:56:56 5
Listen to the OS X system's voices

Listen to different voices in the system--useful for picking the voice you like
This is sample output - yours may be different.
-5

for person in Alex Bruce Fred Kathy Vicki Victoria ; do say -v $person "Hello, my name is $person"; sleep 1; done

haivu · 2009-03-09 15:42:13 6
Periodically loop a command

You can use this to loop any command to periodically see the output. while true; do [YOUR COMMAND HERE]; sleep [# of seconds]; done; Alternatively, you can put it in a simple shell script to save typing! #/!bin/bash while true; do $1; sleep $2; done; /path/to/script.sh "ifconfig eth0 | grep 'inet addr:'" 60 Show Sample Output
This is sample output - yours may be different.
```
inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[60 seconds later]
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
[... Ctrl+C to stop]
```
-5

while true; do ifconfig eth0 | grep "inet addr:"; sleep 60; done;

bandit36 · 2009-04-01 19:29:28 19
show space used by postgres

this command shows the space used in postgres directory. Show Sample Output
This is sample output - yours may be different.
```
4	./pg_twophase
5364	./base/17868
5268	./base/11563
5268	./base/1
114288	./base/11564
4	./base/pgsql_tmp
5736	./base/19846
135932	./base
268584	.
268584	total
```
-5

while (( 1==1 )); do du -c . >> output.log; sleep 2; done; tail -f output.log

aceiro · 2010-07-12 17:23:45 4
Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item

Automation click every 4 second on a macro slot bar to world of warcraft for prospecting item enable auto loot and create macro, put mouse over slot on the bar /cast Prospecting /use Elementium Ore
This is sample output - yours may be different.
-5

while true; do sleep 4 ; xdotool click 1 ; done

rusino · 2011-09-23 09:23:02 4
Wait a moment and then Power off

If you are on your bed, waching a movie or if you are downloading something, but you whant to sleep. You can use these easy command to power off after X time. The time is in sec. if you whant to wait 1 H, use: sleep 3600; poweroff
This is sample output - yours may be different.
-11

sleep 10; poweroff

xmuda · 2013-04-13 22:07:15 6
Five Minutes To Go

command to turn off your computer when you go home and can not wait Show Sample Output
This is sample output - yours may be different.
```
5
4
3
2
1
0
bye, bye
```
-14

for i in $(seq 0 5) ; do echo "5 - $i" | bc -l ; sleep 60 ; done && echo "bye, bye" && shutdown -h now

arctarus · 2009-03-13 12:16:35 835
‹ First < 10 11 12

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Silently deletes lines containing a specific string in a bunch of files

This command will find all occurrences of one or more patterns in a collection of files and will delete every line matching the patterns in every file

Rename files in batch

HTTP Get of a web page via proxy server with login credentials

If you are behind a proxy server and have to authenticate with proxy server to browser web pages then you have to pass proxy server address and its port number along with user credentials to curl to got GET the page using curl. Example : "curl -U srikanth -x 167.85.103.70:8080 http://www.yahoo.com". In case you don't specify the password (as in the above example), curl will prompt to enter the password at the command line.

How to trim a video using ffmpeg

Will trim the video to 4 seconds starting from the beginning. The -vcodec , -acodec options are required so that ffmpeg knows in what video/audio format you want for the new video.

sleep for 1/10s or 1/100s or even 1/1000000s

sleep in microseconds instead of seconds Alternatively to usleep, which is not defined in POSIX 2008 (though it was defined up to POSIX 2004, and it is evidently available on Linux and other platforms with a history of POSIX compliance), the POSIX 2008 standard defines nanosleep

An alternative to: python -m SimpleHTTPServer for Arch Linux

An alternative to: python -m SimpleHTTPServer for Arch Linux source: http://archlinux.me/dusty/2010/01/15/simplehttpserver-in-python-3/

Add line number count as C-style comments

I often find the need to number enumerations and other lists when programming. With this command, create a new file called 'inputfile' with the text you want to number. Paste the contents of 'outputfile' back into your source file and fix the tabbing if necessary. You can also change this to output hex numbering by changing the "%02d" to "%02x". If you need to start at 0 replace "NR" with "NR-1". I adapted this from http://osxdaily.com/2010/05/20/easily-add-line-numbers-to-a-text-file/.

Converts to PDF all the OpenOffice.org files in the directory

Requieres unoconv (debian package)

Get the full path of a bash script's Git repository head.

Rather than complicated and fragile paths relative to a script like "../../other", this command will retrieve the full path of the file's repository head. Safe with spaces in directory names. Works within a symlinked directory. Broken down: $cd "$(dirname "${BASH_SOURCE[0]}")" temporarily changes directories within this expansion. Double quoted "$(dirname" and ")" with unquoted ${BASH_SOURCE[0]} allows spaces in the path. $git rev-parse --show-toplevel gets the full path of the repository head of the current working directory, which was temporarily changed by the "cd".

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using sleep

Commands using sleep (289) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using sleep (289)

sorted by