Commands using ssh sorted by votes

Commands using ssh (347)

sorted by

To generate ssh keypair(public, private) which makes use of dsa as encryption algorithm
This is sample output - yours may be different.
-1

ssh-keygen -t dsa -b 1024

unixmonkey45082 · 2013-01-04 08:26:26 3
Compare a remote file with a local file

Or, if you have restricted access for sftp only, I think you can still do this: diff /path/to/localfile <(scp user@host:/path/to/remotefile >(cat))
This is sample output - yours may be different.
-1

diff /path/to/localfile <(ssh user@host cat /path/to/remotefile)

mc0e · 2013-05-24 09:24:31 8
Keep SSH tunnel open (PostgreSQL example)

Check if SSH tunnel is open and open it, if it isn't. NB: In this example, 3333 would be your local port, 5432 the remote port (which is, afaik, usually used by PostgreSQL) and of course you should replace REMOTE_HOST with any valid IP or hostname. The example above let's you work on remote PostgreSQL databases from your local shell, like this: psql -E -h localhost -p 3333
This is sample output - yours may be different.
-1

while true; do nc -z localhost 3333 >|/dev/null || (ssh -NfL 3333:REMOTE_HOST:5432 USER@REMOTE_HOST); sleep 15; done

rxw · 2015-09-21 02:25:49 11
Run Remote GUI Programs Using SSH Forwarding

Run GUI apps on another machine remotely through SSH. -C is for data compression and -X enables X11 forwarding.
This is sample output - yours may be different.
-2

ssh -C -X user@remotehost gui_command

sharfah · 2009-05-21 17:52:24 7
Forward connections

Forward connections to $HOSTNAME:8080 out to $HOST:80
This is sample output - yours may be different.
-2

ssh -g -L 8080:localhost:80 root@$HOST

kayowas · 2009-10-24 20:56:00 3
Automatd ssh public key setup without ssh-copy-id

Some servers don't have ssh-copy-id, this works in those cases. It will ask for the destination server, this can be IP, hostname, or user@hostname if different from current user. Ssh keygen will let you know if a pubkey already exists on your system and you can opt to not overwrite it.
This is sample output - yours may be different.
-2

echo 'Host or User@Host?:'; read newserver && ssh-keygen -N "" -t rsa -f ~/.ssh/id_rsa ; ssh $newserver cat <~/.ssh/id_rsa.pub ">>" ~/.ssh/authorized_keys ; ssh $newserver

alf · 2010-05-07 06:24:53 4
tail a log over ssh
This is sample output - yours may be different.
-2

ssh remotebox tail -f /var/log/remotelog

netaxiz · 2011-12-13 17:35:54 3
Forward remote server CUPS port to localhost
This is sample output - yours may be different.
-2

ssh -NL 12345:localhost:631 username@remote_server

shawn_abdushakur · 2014-02-25 15:49:34 6
having root on server, add user's public key to his keys (no password required)
This is sample output - yours may be different.
-2

cat user_public_key.pub | ssh root@<host> "cat | su -c 'mkdir -m 700 -p ~/.ssh && cat >> ~/.ssh/authorized_keys && chmod 600 ~/.ssh/authorized_keys' <user>"

noisy · 2016-05-09 08:48:40 14
How to run a specific command in remote server by ssh

Once it is connected to the remote server by that ssh protocol,the mentioned command will start working on that server.
This is sample output - yours may be different.
-3

ssh user@remotehost [anycommand](i.e uptime,w)

unixbhaskar · 2009-08-29 04:27:37 7
unzip file on local machine copy to remote machine with ssh

It is an easy method unzip a file and copy it to remote machine. No unziped file on local hard drive Show Sample Output
This is sample output - yours may be different.
```
$ gzip -cd file.gz | ssh twfcc@myhost 'dd of=~/junk'
0+1 records in
0+1 records out
6 bytes transferred in 0.222 secs (27 bytes/sec)
$ 
```
-3

gzip -cd file.gz | ssh user@host 'dd of=~/file'

twfcc · 2010-09-20 11:44:19 3
ssh Publickey auf remote Rechner anh?ngen
This is sample output - yours may be different.
-3

cat .ssh/id_rsa.pub | ssh user@server "cat >>.ssh/authorized_keys2"

chrrr · 2011-10-13 09:08:57 4
show you the time when you lost the remote server.

Run this within a steady screen session. You can get the approximate time when the remote server went down or other abnormal behavior.
This is sample output - yours may be different.
-3

ssh remotehosts;date

kiiwii · 2012-11-09 01:14:24 4
Copy ssh keys to user@host to enable password-less ssh logins.
This is sample output - yours may be different.
-3

ssh-copy-id [-i [identity_file]] [user@]machine

www · 2012-12-08 19:48:19 6
copy public key

for passwordless login
This is sample output - yours may be different.
-4

cat .ssh/id_rsa.pub | ssh user@server 'cat >> ~/.ssh/authorized_keys2'

er0k · 2012-07-12 15:42:10 97
Execute sudo command remotely with ssh

This command will ask for remote sudo password before executing a remote command.
This is sample output - yours may be different.
-4

ssh -t myserver.org 'sudo ls /etc'

patko · 2013-04-09 04:23:37 10
3 Simple Steps to X11 Forward on Mac OS X

To start X11 display only on your local machine: xeyes & Extensions to basic command: ssh -X -f user@remotehost xcalc -bg black -fg green
This is sample output - yours may be different.
-5

ssh -X johndoe@123.456.789

evandrix · 2011-05-19 21:28:25 3
Running applications require X in ssh

One time you logged in, you can prove these method just writing "firefox".
This is sample output - yours may be different.
-6

ssh -X -l user 192.168.1.25

xmuda · 2013-04-30 13:48:28 6
dd and ssh

waste the band width Show Sample Output
This is sample output - yours may be different.
```
none
```
-7

dd if=/dev/zero bs=1M | ssh somesite dd of=/dev/null

vbs100 · 2009-02-11 13:03:14 18
Cute, but we already had this figured out when the Linux kids were still slurping down log-sized spliffs in the back of the microbus.

put down the joint and rtfm :)
This is sample output - yours may be different.
-7

ssh-keygen -R hostname

jritorto · 2009-07-16 15:41:33 4
analyze traffic remotely over ssh w/ wireshark

This allows you to display the wireshark program running on remote pc to your local pc.
This is sample output - yours may be different.
-8

sudo ssh -Y remoteuser@remotehost sudo wireshark

Code_Bleu · 2010-01-05 14:35:20 3
use .ssh file to login the server

use .ssh file to login the server
This is sample output - yours may be different.
-8

ssh root@172.16.1.99 -i my_openssh_key.ssh -p 9999

motopig · 2013-03-10 12:37:19 6
‹ First < 12 13 14

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

wget download with multiple simultaneous connections

Find the package that installed a command

Download mp3 files linked in a RSS podcast feed

Directly download all mp3 files of the desired podcast

Write comments to your history.

A null operation with the name 'comment', allowing comments to be written to HISTFILE. Prepending '#' to a command will *not* write the command to the history file, although it will be available for the current session, thus '#' is not useful for keeping track of comments past the current session.

put current directory in LAN quickly

Break lines after, for example 78 characters, but don't break within a word/string

Per default, linux/unix shells are configured with a width of 80 characters. If you like to edit a phrase or string on a line with more than 80 characters it might take long to go there (for example a line with 1000 characters and you like to edit the 98th word which is character 598-603). Maybe you might wish to use 78 characters, because if you forward the text via mail and the text will be quoted (2 extra characters at the beginning to the line "> "), you use 80 characters, otherwise 82, which are lame.

Greets the user appropriately

Convert seconds to [DD:][HH:]MM:SS

Converts any number of seconds into days, hours, minutes and seconds. sec2dhms() { declare -i SS="$1" D=$(( SS / 86400 )) H=$(( SS % 86400 / 3600 )) M=$(( SS % 3600 / 60 )) S=$(( SS % 60 )) [ "$D" -gt 0 ] && echo -n "${D}:" [ "$H" -gt 0 ] && printf "%02g:" "$H" printf "%02g:%02g\n" "$M" "$S" }

Slow Down Command Output

( Or $ ls -lat|lolcat -a if you like it in technicolor - apt install lolcat if needed )

One-liner to generate Self-Signed SSL Certificate+Key without any annoying prompts or CSRs

Handy if you want to quickly generate a self-signed certificate. Also can be used in your automated scripts for generating quick-use certificates.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using ssh

Commands using ssh (347) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using ssh (347)

sorted by