This will get the job done in the most efficient way - spawning only one `rm` process. "On-the-fly" find data is displayed through `tee` and you should have plenty of time to ctrl-c if needed before it's too late. You may need to re-run this after major Software Updates. To leave more languages in, add more ``-and \! -iname "lang*"'' statements: sudo find / -iname "*.lproj" -and \! -iname "en*" -and \! -iname "spanish*" -print0 | tee /dev/stderr | sudo xargs -0 rm -rfv **Edit: note the 2nd sudo near the end of the pipeline - this is necessary.

Reconfigures time zone in Ubuntu, which I cannot figure out how to do through the GUI. Worked like a charm to set my time zone to CEST from EDT.

The command is useful when, e.g., booting an existing system with a rescue or installation CD where you need to chroot into the hard-disk and be able to do stuff which accesses kernel info (e.g. when installing Ubuntu desktop with LVM2 you need to mount and chroot the hard disk from a shell window in order to install packages and run initramfs inside chroot). The command assumes that /mnt/xxx is where the chroot'ed environment's root file system on the hard disk is mounted.

Shows the UUID of a filesystem or partition that can be used in kernel root options and in fstab. Run it without the -u option to generate more information. eg: ~/ sudo vol_id /dev/sda2 ID_FS_USAGE=other ID_FS_TYPE=swap ID_FS_VERSION=2 ID_FS_UUID=27fca13d-97b7-4d28-882c-6d03353f0a82 ID_FS_UUID_ENC=27fca13d-97b7-4d28-882c-6d03353f0a82 ID_FS_LABEL= ID_FS_LABEL_ENC= Show Sample Output

To get the connection information of protocol tcp and extended infortmation. Show Sample Output

Please check out my blog article on this for more detail. http://jdubb.net/blog/2009/08/07/monitor-wireshark-capture-real-time-on-remote-host-via-ssh/

Shows how many Windows and Linux devices are on your network. May add support for others, but that's all that are on my network right now. Show Sample Output

Please install aria2c before you try the above command. On ubuntu the command to install aria2c would be: sudo aptitude install aria2

Show Sample Output

Run this command as root to get enough stats. It works on AMD and Intel machines, including desktops. If ran on a laptop it'll give you suggestions on extending your battery life. You'll need to install PowerTOP if you don't have, via 'apt-get install powertop', etc. To grep the output use: sudo powertop -d | grep ... The many command suggestions PowerTOP gives you alone will increase your command-line fu! Show Sample Output

USAGE: $ sudor your command This command uses a dirty hack with history, so be sure you not turned it off. WARNING! This command behavior differ from other commands. It more like text macro, so you shouldn't use it in subshells, non-interactive sessions, other functions/aliases and so on. You shouldn't pipe into sudor (any string that prefixes sudor will be removed), but if you really want, use this commands: proceed_sudo () { sudor_command="`HISTTIMEFORMAT=\"\" history 1 | sed -r -e 's/^.*?sudor//' -e 's/\"/\\\"/g'`" ; pre_sudor_command="`history 1 | cut -d ' ' -f 5- | sed -r -e 's/sudor.*$//' -e 's/\"/\\\"/g'`"; if [ -n "${pre_sudor_command/ */}" ] ; then eval "${pre_sudor_command%| *}" | sudo sh -c "$sudor_command"; else sudo sh -c "$sudor_command" ;fi ;}; alias sudor="proceed_sudo # "

Sometimes, simpler is better.

Note: Replace 200000 with drive bytes/512, and /dev/sdx with the destination drive/partition. ;) Note: You may need to install pipebench, this is easy with "sudo apt-get install pipebench" on Ubuntu. The reason I hunted around for the pieces to make up this command is that I wanted to specifically flip all of the bits on a new HDD, before running an Extended SMART Self-Test (actually, the second pass, as I've already done one while factory-zeroed) to ensure there are no physical faults waiting to compromise my valuable data. There were several sites that came up in a Google search which had a zero-fill command with progress indicator, and one or two with a fill-with-ones command, but none that I could find with these two things combined (I had to shuffle around the dd command(s) to get this to happen without wasting speed on an md5sum as well). For reference, these are the other useful-looking commands I found in my search: Zero-fill drive "/dev/sdx", with progress indicator and md5 verification (run sudo fdisk -l to get total disk bytes, then divide by 512 and enter the resulting value into this command for a full wipe) dd if=/dev/zero bs=512 count=<size/512> | pipebench | sudo tee /dev/sdx | md5sum And this command for creating a file filled with ones is my other main source (besides the above command and man pages, that is - I may be a Linux newbie but I do read!): tr '\000' '\377' < /dev/zero | dd of=allones bs=1024 count=2k Hope someone finds this useful! :) Cheers, - Gliktch Show Sample Output

We sometimes need to change kernel parameters by echoing the file . This needs root privilege and if we do it using sudo like this , it fails sudo echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor -bash: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: Permission denied We can achieve this with the tee command by just doing sudo without logging as root user http://www.zaman4linux.in/2010/09/using-tee-to-echo-to-system-file-with.html

If you update youtube-dl from the repos, it becomes out-of-date quickly. Luckily, it can auto-update. Show Sample Output

after that, you can launch bash script in your usb drive in FAT32.

View all memcache traffic

I'll let Slayer handle that. Raining Blood for your pleasure.

commandline for mac os x