Commands using sudo (537)

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

show todays svn log
Shows the todays svn log. Perfect for alias usage I assume.

Remotely sniff traffic and pass to snort
I have a small embedded linux device that I wanted to use for sniffing my external network, but I didn't want to recompile/cross-compile snort for the embedded platform. So I used tcpdump over ssh to pass all the traffic as pcap data to a "normal" Linux system that then takes the pcap data and passes it to snort for processing.

STAT Function showing ALL info, stat options, and descriptions
This shows every bit of information that stat can get for any file, dir, fifo, etc. It's great because it also shows the format and explains it for each format option. If you just want stat help, create this handy alias 'stath' to display all format options with explanations. $ alias stath="stat --h|sed '/Th/,/NO/!d;/%/!d'" To display on 2 lines: $ ( F=/etc/screenrc N=c IFS=$'\n'; for L in $(sed 's/%Z./%Z\n/'

Show apps that use internet connection at the moment.
show only the name of the apps that are using internet

Compare directories via diff
http://hints.macworld.com/article.php?story=20070408062023352

Write comments to your history.
A null operation with the name 'comment', allowing comments to be written to HISTFILE. Prepending '#' to a command will *not* write the command to the history file, although it will be available for the current session, thus '#' is not useful for keeping track of comments past the current session.

Share a terminal screen with others
If you enable multiuser, then you can permit others to share your screen session. The following conditions apply: 1. screen must be suid root; 2. "multiuser on" must be configured in ~/.screenrc; 3. control the others user(s) access with "aclchg": # ----- from ~/.screenrc-users ----- aclchg someuser +rx "#?" #enable r/o access to "someuser" aclchg someuser -x "#,at,aclchg,acladd,acldel,quit" # don't allow these aclchg otheruser +rwx "#?" # enable r/w access to "otheruser" aclchg otheruser -x "#,at,aclchg,acladd,acldel,quit" # don't allow them to use these commands # ----- After doing this (once), you start your session with: $ screen Then, the other user can join your terminal session(s) with youruserid: $ screen -r youruserid/ Note: the trailing "/" is required. Multiple users can share the same screen simultaneously, each with independent access controlled precisely with "aclchg" in the ~/.screenrc file. I use the following setup: # ~/.screenrc-base # default screenrc on any host source $HOME/.screenrc-base source $HOME/.screenrc-$HOST source $HOME/.screenrc-users # ----- Then, the base configurations are in ~/.screenrc-base; the host-specific configurations are in ~/.screenrc-$HOST, and the user configurations are in ~/.screenrc-users. The host-specific .screenrc file might contain some host-specific screen commands; e.g.: # ~/.screen-myhost # ----- screen -t 'anywhere' /bin/tcsh screen -t 'anywhere1' /bin/tcsh # ---- The .screenrc-base contains: # ~/.screenrc-base ## I find typing ^a (Control-a) awkward. So I set the escape key to CTRL-j instead of a. escape ^Jj termcapinfo xterm* ti@:te@: autodetach on zombie kr verbose on multiuser on

Adding Color Escape Codes to global CC array for use by echo -e
I was looking for the fastest way to create a bunch of ansi escapes for use in echo -e commands throughout a lot of my shell scripts. This is what I came up with, and I actually stick that loop command in a function and then just call that at the beginning of my scripts to not clutter the environment with these escape codes, which can wreck havok on my terminal when I'm dumping the environment. More of a cool way to store escape ansi codes in an array. You can echo them like: $ echo -e "${CC[15]}This text is black on bright green background." I usually just use with a function: $ # setup_colors - Adds colors to array CC for global use $ # 30 - Black, 31 - Red, 32 - Green, 33 - Yellow, 34 - Blue, 35 - Magenta, 36 - Blue/Green, 37 - White, 30/42 - Black on Green '30\;42' $ function setup_colors(){ declare -ax CC; for i in `seq 0 7`;do ii=$(($i+7));CC[$i]="\033[1;3${i}m";CC[$ii]="\033[0;3${i}m";done;CC[15]="\033[30;42m"; export R='\033[0;00m';export X="\033[1;37m"; }; $ export -f setup_colors CC[15] has a background of bright green which is why it is separate. R resets everything, and X is my default font of bright white. $ CC[15]="\033[30;42m"; R=$'\033[0;00m'; X=$'\033[1;37m' Those are just my favorite colors that I often use in my scripts. You can test which colors by running $ for i in $(seq 0 $((${#CC[@]} - 1))); do echo -e "${CC[$i]}[$i]\n$R"; done See: http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html for more usage.

Sort a character string
Sorts a character string, using common shell commands.

Forwards connections to your port 2000 to the port 22 of a remote host via ssh tunnel

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: