Commands tagged Network sorted by votes

Commands tagged Network (129)

sorted by

Get your external IP address

Gets your IP address and has a shorter URL. Show Sample Output
This is sample output - yours may be different.
```
74.171.65.62
```
0

curl l2.io/ip

abrambleninja · 2013-06-07 16:23:01 7
Wait for Web service to spin up, aka alert me when the server stops returning a 503

Show Sample Output
This is sample output - yours may be different.
```
OK: server is up.
OK: server is up.
OK: server is up.
```
0

while true; do curl -vsL -o /dev/null example.com 2>&1 | grep 503 > /dev/null || echo "OK: server is up."; sleep 8; done

noah · 2013-06-26 15:24:51 6
Wait for Web service to spin up, aka alert me when the server stops returning a 503
This is sample output - yours may be different.
0

while curl -dsL example.com 2>&1 | grep 503;do sleep 8;done;echo server up

emile · 2013-07-10 19:03:25 6
Check if TCP port 25 is open

Check trough unix sockets if tcp port is open or close Show Sample Output
This is sample output - yours may be different.
```
TCP port 25 close
```
0

(echo >/dev/tcp/localhost/25) &>/dev/null && echo "TCP port 25 open" || echo "TCP port 25 close"

YouM · 2013-11-12 02:11:01 8
Check if TCP port 25 is open

netstat will list all open ports on the system, unix sockets, tcp sockets and udp sockets. the t flag limits to tcp ports the l flag limits to listening ports and the n flag disables the translation of port to service ( ie :25 displayed instead of :smtp ). then grep for the port you are interested in preceeded by a colon. Show Sample Output
This is sample output - yours may be different.
```
tcp     0     0 127.0.0.1:25     0.0.0.0:*      LISTEN
```
0

netstat -tln | grep :25

Peteches · 2013-11-12 16:47:06 6
Check if TCP port 25 is open
This is sample output - yours may be different.
0

sudo lsof -iTCP:25 -sTCP:LISTEN

pdxdoughnut · 2013-11-12 17:32:34 6
Check if TCP port 25 is open

Using netcat (nc) 25 can be replaced with the friendly value (smtp). Check error code for result or use -v option to echo output nc -z localhost smtp && echo open || echo closed nc -zv host protocol Show Sample Output
This is sample output - yours may be different.
```
Connection to localhost 25 port [tcp/smtp] succeeded!
```
0

nc -zv localhost 25

toaster · 2013-11-21 22:04:00 10
Generate random valid mac addresses

The sed script ensures that the "random" MAC address is unicast (bit 0 of first byte == 0) and local (bit 1 of first byte == 1)
This is sample output - yours may be different.
0

openssl rand -hex 6 | sed 's/$..$/:\1/g; s/^.$.$[0-3]/\12/; s/^.$.$[4-7]/\16/; s/^.$.$[89ab]/\1a/; s/^.$.$[cdef]/\1e/'

phil_m · 2014-04-23 21:43:38 6
Full remote server backup over cstream using tar (excluding unnecessary files) (reports every 10 seconds)

The files are automatically uncompressed when they reach the destination machine. This is a fast way to backup your server to your local computer while it's running (shutting down services is recommended). A file named "exclude.txt" is needed at /tmp/ containing the following : /dev/* /media/* /mnt/* /proc/* /sys/* /tmp/* /home/*/.local/share/Trash /home/*/.gvfs /home/*/.cache /home/*/.thumbnails /etc/fstab /lib/modules/*/volatile/.mounted /var/run/* /var/lock/* /var/tmp/* /var/cache/apt/archives/* /lost+found/* Show Sample Output
This is sample output - yours may be different.
```
895643648 B 854.2 MB 2125.2 s (35:25 min) 421438 B/s 411.56 KB/s
898371584 B 856.8 MB 2132.5 s (35:32 min) 421280 B/s 411.41 KB/s
901783552 B 860.0 MB 2139.8 s (35:39 min) 421431 B/s 411.55 KB/s
904785920 B 862.9 MB 2147.0 s (35:46 min) 421420 B/s 411.54 KB/s
908300288 B 866.2 MB 2154.0 s (35:54 min) 421678 B/s 411.79 KB/s
911953920 B 869.7 MB 2161.2 s (36:01 min) 421969 B/s 412.08 KB/s
914890752 B 872.5 MB 2168.4 s (36:08 min) 421929 B/s 412.04 KB/s
919408640 B 876.8 MB 2175.4 s (36:15 min) 422647 B/s 412.74 KB/s
923365376 B 880.6 MB 2182.6 s (36:22 min) 423061 B/s 413.15 KB/s
```
0

tar -cj / -X /tmp/exclude.txt | cstream -v 1 -c 3 -T 10 | ssh user@host 'tar -xj -C /backupDestination'

fantleas · 2014-07-21 18:52:19 9
Get the IP address of a machine. Just the IP, no junk.

Gives the DNS listed IP for the host you're on... or replace `hostname` with any other host Show Sample Output
This is sample output - yours may be different.
```
Just the IP of the hostname according to DNS
```
0

host `hostname` | rev | cut -d' ' f1 | rev

shaggyhiggins · 2014-10-01 18:55:05 8
List ethernet ports speed

It will list your machine's ethernet ports speed Show Sample Output
This is sample output - yours may be different.
```
eth0:   Speed: 1000Mb/s
eth1:   Speed: 1000Mb/s
eth2:   Speed: 10000Mb/s
eth3:   Speed: 10000Mb/s
```
0

for d in $(cd /sys/class/net && echo eth?) ; do echo "$d: $(ethtool $d |grep -w Speed)"; done

bassiek · 2014-12-28 15:47:46 8
Get your external IP address

Fast and simple. Details: http://api.ident.me Show Sample Output
This is sample output - yours may be different.
```
123.123.123.123
```
0

curl http://ident.me

gmy · 2015-01-13 14:34:47 9
Get your external IP address
This is sample output - yours may be different.
0

curl whatismyip.akamai.com && echo

donmez · 2015-02-07 17:32:02 8
turn on/off wifi

start wifi connection sudo service network-manager start stop wifi connection sudo service network-manager stop
This is sample output - yours may be different.
0

sudo service network-manager start

asdzxc · 2015-02-08 12:06:16 8
Password server

This server can be access by a browser or other remote terminal with ncat. I have to use de test && break to allow ctrl-c to close. Show Sample Output
This is sample output - yours may be different.
```
#abGqHf=MM
o_DoB5da`#
```
0

while [ 1 ]; do cat /dev/urandom | tr -dc ' -~' | head -c 10 | ncat -l 8080 &> /dev/null; test $? -gt 128 && break; done

xxjcaxx · 2016-05-04 14:36:47 10
Get your external IP address
This is sample output - yours may be different.
0

$ curl -L ipconfig.me

Repie · 2018-02-08 09:18:10 24
Get your public IP address using Amazon
This is sample output - yours may be different.
0

curl checkip.amazonaws.com

luissquall · 2019-08-29 23:12:41 169
List nearbies
This is sample output - yours may be different.
-1

/usr/sbin/arp -i eth0 | awk '{print $3}' | sed 1d

prayer · 2009-03-24 18:53:26 8
Get your external IP address

Same thing as above, just uses fetch and ipchicken.com Show Sample Output
This is sample output - yours may be different.
```
1.2.3.4
```
-1

fetch -q -o - http://ipchicken.com | egrep -o '([[:digit:]]{1,3}\.){3}[[:digit:]]{1,3}'

spackle · 2009-08-06 11:57:44 3
Get your external IP address with the best commandlinefu.com command

This command uses the top voted "Get your external IP" command from commandlinefu.com to get your external IP address. Use this and you will always be using the communities favourite command. This is a tongue-in-cheek entry and not recommended for actual usage.
This is sample output - yours may be different.
-1

eval $(curl -s http://www.commandlinefu.com/commands/matching/external/ZXh0ZXJuYWw=/sort-by-votes/plaintext|sed -n '/^# Get your external IP address$/{n;p;q}')

jgc · 2009-11-04 16:58:31 6
Show Network IP and Subnet

same thing as the other
This is sample output - yours may be different.
-1

ipcalc $(ifconfig eth0 | grep "inet addr:" | cut -d':' -f2,4 | sed 's/.+Bcast:/\//g') | awk '/Network/ { print $2 } '

solarislackware · 2009-12-05 15:00:32 3
Get your external IP address

Request all information about my IP address in xml format
This is sample output - yours may be different.
-1

curl ifconfig.me/all/xml

truemilk · 2010-04-21 20:45:17 3
Find default gateway

Find your default gateway and print it directly output. http://www.bayner.com/ kerim@bayner.com Show Sample Output
This is sample output - yours may be different.
```
192.168.1.1
```
-1

ip route show | awk '$3 ~ /^[1-9]+/ {print $3;}'

kerim · 2010-08-08 23:57:23 3
Find default gateway
This is sample output - yours may be different.
-1

route -n | grep "^0\." | awk '{print "Gateway to the World: "$2", via "$NF""}'

bandie91 · 2010-08-09 11:55:37 26
Get your external IP address

Additionally it may give your geolocation if it's known by hostip.info Show Sample Output
This is sample output - yours may be different.
```
ipv4: 188.165.241.33
hostname: ns390090.ovh.net
city: Roubaix
country: FRANCE (FR)
latitude: 50.7
longitude: 3.1667
```
-1

curl http://my-ip.cc/host.txt

samleb · 2011-09-01 00:28:49 3
‹ First < 2 3 4 5 6 >

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Btrfs: Find file names with checksum errors

Btrfs reports the inode numbers of files with failed checksums. Use `find` to lookup the file names of those inodes. The files may need to be deleted and replaced with backups.

list block devices

Shows all block devices in a tree with descruptions of what they are.

How To Display Bash History Without Line Numbers

userful for direct copy & paste command for doumenation or next using

Convert CSV to JSON

Replace 'csv_file.csv' with your filename.

floating point operations in shell scripts

Calculator for shell. Similar performance and basic usage as 'bc', but with more advanced features. Not installed on most systems by default.

Detect illegal access to kernel space, potentially useful for Meltdown detection

Based on capsule8 agent examples, not rigorously tested

list block devices

Shows all block devices in a tree with descruptions of what they are.

vi - Change only whole words exactly matching 'http' to 'git'; ask for confirmation.

http://vim.wikia.com/wiki/Search_and_replace github anda limando feo ....: https://groups.google.com/forum/?fromgroups#!topic/symfony2/YL1mo_cz4Ms

check open ports without netstat or lsof

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands tagged network

Commands tagged Network (129) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands tagged Network (129)

sorted by