All commands

All commands (14,187)

sorted by

Get an embedded Rust development environment set up without prompting

Rust kernel development needs a far different setup than most projects — so by passing these flags to rustup-init, you can ensure that you’ll have a Rust toolchain that will work on your system with little, if any, effort.
This is sample output - yours may be different.
0

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | bash -s -- --default-toolchain nightly --component rust-analyzer-preview --component llvm-tools-preview --component rust-src --component rustc-dev -y

realkstrawn93 · 2022-04-12 17:15:24 580
Have a smile

Outputs utf-8 smileys Show Sample Output
This is sample output - yours may be different.
```
????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
```
5

printf "$(awk 'BEGIN{c=127;while(c++<191){printf("\xf0\x9f\x98\\%s",sprintf("%o",c));}}')"

ichbins · 2022-04-06 12:10:37 441
Add temporary <1m entries to old cron

Old cron doesn't allow periods
This is sample output - yours may be different.
1

for i in $( seq 0 5 55 ); do (crontab -l ; echo "* * * * * sleep $i; date >> ~/log.txt") | crontab -; done

swarzynski · 2022-04-04 09:56:40 465
ASCII art of yourself

Use libcaca to render ascii chars on the webcam input... or don't.
This is sample output - yours may be different.
6

mplayer tv:// -vo caca

MarxBro · 2022-03-30 14:49:57 414
Print sensors data for your hardware
This is sample output - yours may be different.
4

paste <(cat /sys/class/thermal/thermal_zone*/type) <(cat /sys/class/thermal/thermal_zone*/temp) | column -s $'\t' -t | sed 's/$.$..$/.\1°C/'

wuseman1 · 2022-03-29 22:43:08 380
Print interface that is up and running
This is sample output - yours may be different.
2

ip addr | awk '/state UP/ {print $2}' | sed 's/.$//'

wuseman1 · 2022-03-29 05:27:12 377
HOME USE ONLY: Get rid of annoying Polkit password prompts

Although the need to type a password to make certain changes to the system may make perfect sense in a business or educational environment, it makes absolutely zero sense to the home user. So, if you’re at home and would rather get work done than be annoyed by what is essentially Linux’s UAC, then this command is for you.
This is sample output - yours may be different.
1

sudo find /usr/share/polkit-1 -iname “*.policy” -exec sed -i “s/$auth_admin\|auth_admin_keep$/yes/g” {} \;

realkstrawn93 · 2022-03-28 03:00:09 392
Quickly add a new user to all groups the default user is in

an alternative to this one with only 2 processes https://www.commandlinefu.com/commands/view/25844/quickly-add-a-new-user-to-all-groups-the-default-user-is-in
This is sample output - yours may be different.
0

awk -F: '/^.+user1/{print $1}' /etc/group | xargs -n1 sudo adduser user2

ichbins · 2022-03-18 11:32:47 394
Convert records in columns to csv
This is sample output - yours may be different.
2

awk '{print $3,$2,$1}' RS="\n\n" FS="\n" OFS="," filename.txt

swarzynski · 2022-03-08 17:58:32 333
Show tcp connections sorted by Host / Most connections
This is sample output - yours may be different.
11

netstat -ntu|awk '{print $5}'|cut -d: -f1 -s|sort|uniq -c|sort -nk1 -r

dbiesecke · 2022-03-08 11:52:18 384
Infinite loop ssh

This version won't reconnect if you exit the ssh connection with a non-zero exit code. ConnectTimeout and sleep values knobs for how long to wait for each retry.
This is sample output - yours may be different.
0

h=root@localhost ; while ! ssh -o ConnectTimeout=5 $h true; do sleep 5; done; ssh $h

justsomeguy · 2022-03-05 06:48:06 361
Display disk partition sizes
This is sample output - yours may be different.
8

lsblk -o name,size

justsomeguy · 2022-03-04 04:29:47 375
Developer: Add an IDT map design reference to your source tree

Kernel developers might need to know what indices to map to the IOAPIC if building a new kernel from scratch. This command gives users a guide to go off of.
This is sample output - yours may be different.
0

cp /proc/interrupts irq-ref.txt

realkstrawn93 · 2022-02-23 19:53:02 506
Recursive dwdiff using find -exec

Recursively compares files in directories DIR and OLD_FILES using dwdiff Word-by-word comparison with dwdiff results in words unique to NEW file versions in the DIR directory tree shown enclosed in [- SQUARE BRACKETS -] and words unique to OLD file versions in the OLD_FILES directory tree shown enclosed in {+ CURLY BRACES +} Note: does not detect files unique to the OLD_FILES directory tree. Show Sample Output
This is sample output - yours may be different.
```
Can't open file /OLD_FILES/new_file1: No such file or directory
Can't open file /OLD_FILES/new_file2: No such file or directory

dwdiff.txt contains output:
./DIR/file1
======================================================================
 [-NEW-] {+OLD+}
======================================================================

{+OLD+}
======================================================================
======================================================================
--EOF--
./DIR/file2
======================================================================
 [-NEW-] {+OLD+}
======================================================================
--EOF--
```
0

find DIR -exec sh -c "if [ -f \"{}\" ]; then echo {} >> dwdiff.txt; dwdiff --no-common {} /OLD_FILES/{} >> dwdiff.txt; echo \"--EOF--\" >> dwdiff.txt; fi" \;

RiskNerd · 2022-02-23 08:52:13 368
Shows picture exif GPS info if any and converts coords to a decimal degree number

This oneliner uses Imagemagic's identify utility to show the exif GPS information of an image an also converts Grad/MIn/Sec representation to a decimal degree number Show Sample Output
This is sample output - yours may be different.
```
    exif:GPSAltitude: 1665000/1000
    exif:GPSAltitudeRef: 0
    exif:GPSDateStamp: 2017:10:25
    exif:GPSInfo: 3166
    exif:GPSLatitude: 47/1, 39/1, 403802/10000  (47.661217)
    exif:GPSLatitudeRef: N
    exif:GPSLongitude: 11/1, 47/1, 374272/10000  (11.793730)
    exif:GPSLongitudeRef: E
    exif:GPSMapDatum: WGS-84
    exif:GPSProcessingMethod: ASCII
    exif:GPSTimeStamp: 10/1, 32/1, 53/1
    exif:GPSVersionID: 2, 2, 0, 0
```
5

identify -verbose my_image.jpg | awk 'function cf(i){split(i,a,"/");if(length(a)==2){return a[1]/a[2]}else{return a[1]}}/GPS/{if($1~/GPSLatitude:|GPSLongitude:/){s=$0;gsub(/,/,"",$0);printf("%s (%f)\n", s, $2+cf($3)/60+cf($4)/3600)}else{print}}'

ichbins · 2022-02-20 10:17:49 322
Enlarge KiCad PCB footprint pads to 2mm for all smaller pads
This is sample output - yours may be different.
0

sed -E -i.bak 's/(^ +$pad.*\(size)([^$]+)(\) $drill)([^$]+)(.*)/\1 2 2\3 1\5/g' SOURCE_FILE.kicad_pcb

alikhalil · 2022-02-12 19:25:14 337
Quickly add a new user to all groups the default user is in

This is a standard procedure for me, whenever I set up a new Raspberry Pi system. Because the default user is "pi", I quickly replace it with my own (e.g. "kostis"), but I have to substitute that user to all of pi's groups first, before deleting the default account. xargs helps a lot with that in a single line, while avoiding boring "for" loops. For everything trickier, there's always "parallel" :)
This is sample output - yours may be different.
3

groups pi | xargs -n 1 | tail -n +4 | xargs -n 1 sudo adduser kostis

kostis · 2022-01-25 07:20:09 449
Observing the difference between kernel configs after make config was executed to see if anything was changed from last kernel config (Gentoo)

Alternatively, the kernel provides a script to cleanly compare two config files even if the options have moved in the file itself: /usr/src/linux/scripts/diffconfig .config.old .config
This is sample output - yours may be different.
0

diff <(sort .config) <(sort .config.old) | awk '/^>.*(=|Linux)/ { $1=""; print }'

wuseman1 · 2022-01-24 16:57:35 566
Download entire website
This is sample output - yours may be different.
3

wget -r -p -U Mozilla --wait=10 --limit-rate=35K https://www.thegeekstuff.com

shantanuo · 2022-01-24 02:56:53 405
Shows a specific process memory usage
This is sample output - yours may be different.
1

mem() { ps -C "$1" -O rss | awk '{ count ++; sum += $2 }; END {count --; print "Number of processes:\t",count; print "Mem. usage per process:\t",sum/1024/count, "MB"; print "Total memory usage:\t", sum/1024, "MB" ;};'; }

mikhail · 2022-01-23 16:14:24 370
macOS: Save disk space by moving apps to external drives

Because Mac app bundles contain everything in one place, it makes running them from anywhere, including from a device such as a USB flash drive or external HDD, possible. So if your Mac has a mere 256GB of storage (as mine does), you can free up large quantities of disk space by storing apps like, say, Xcode on external devices.
This is sample output - yours may be different.
2

sudo mv /Applications/foo /Volumes/bar/Applications/foo && sudo ln -s /Volumes/bar/Applications/foo /Applications/foo

realkstrawn93 · 2022-01-20 18:03:36 354
Remove metadata from pdf file (e.g. creation date)
This is sample output - yours may be different.
0

qpdf --pages source.pdf 1-z -- --empty clean-file.pdf

swarzynski · 2022-01-12 08:10:32 408
Change dates/timestamps of all files in the current folder
This is sample output - yours may be different.
-1

gci -rec | %{ $_.lastWriteTime = ($_.lastAccessTime = ($_.creationTime = (get-date "2021-05-19T10:14:00"))) }

swarzynski · 2022-01-12 08:08:40 372
Display disk partition sizes

It is the same but more faster real 0m0,007s user 0m0,011s sys 0m0,000s with my solution real 0m0,038s user 0m0,044s sys 0m0,000s with your solution :) Show Sample Output
This is sample output - yours may be different.
```
NAME	SIZE
loop0	55,5M
loop1	55,5M
loop2	42,2M
loop3	43,3M
loop4	18,4M
loop5	61,9M
loop6	18,4M
loop7	61,9M
sda	55,9G
sdb	298,1G
sr0	1024M
```
3

lsblk | grep -v part | awk '{print $1 "\t" $4}'

gecco · 2022-01-11 13:31:04 232
Remove password from Bank Statement
This is sample output - yours may be different.
5

pdftk INPUT.PDF input_pw 0123456789 cat output OUTPUT.PDF

alikhalil · 2022-01-09 06:22:14 322
‹ First < 2 3 4 5 6 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

[vim] Clear a file in three characters (plus enter)

% selects every line in the file. 'd' deletes what's selected. It's a pretty simple combination.

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

print multiplication formulas

seq -s ' ' 1 9 | sed -n ':a;p;s/ *\w$//;h;/^$/t;b a;q' | tac | awk '{for(i=1;i

Get your default route

This gets you your default route programatically, useful for scripts

Advanced python tracing

Trace python statement execution and syscalls invoked during that simultaneously

Install a basic FreeBSD system

Install a basic FreeBSD system on a distant server. I use this to install FreeBSD on servers that can only boot a Linux rescue system. This sytem loads on ram when booted, so it is possible to install freely. You can even install on ZFS root !

rsync with progress bar.

transfer files from localhost to a remotehost.

Which processes are listening on a specific port (e.g. port 80)

swap out "80" for your port of interest. Can use port number or named ports e.g. "http"

Get absolut path to your bash-script

Another way of doing it that's a bit clearer. I'm a fan of readable code.

Edit a google doc with vim

Google just released a new commend line tool offering all sorts of new services from the commend line. One of them is uploading a youtube video but there are plenty more google services to interact with. Download it here: http://code.google.com/p/googlecl/ Manual: http://code.google.com/p/googlecl/wiki/Manual This specific command courtesy of lifehacker:http://lifehacker.com/5568817/ Though all can be found in manual page linked above.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)

All commands (14,187) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

All commands (14,187)

sorted by