Commands using du sorted by votes

Commands using du (244)

sorted by

Find the 10 users that take up the most disk space

In OSX you would have to make sure that you "sudo -s" your way to happiness since it will give a few "Permission denied" errors before finally spitting out the results. In OSX the directory structure has to start with the "Users" Directory then it will recursively perform the operation. Your Lord and master, Mematron Show Sample Output
This is sample output - yours may be different.
```
19234	/Users/mematron
3	/Users/Shared
1	/Users/n00b
1	/Users/fignewton
1	/Users/spam
0	/Users/akira
```
1

sudo -s du -sm /Users/* | sort -nr | head -n 10

mematron · 2012-09-13 10:15:23 4
Get top N files in X directory

You can simply run "largest", and list the top 10 files/directories in ./, or you can pass two parameters, the first being the directory, the 2nd being the limit of files to display. Best off putting this in your bashrc or bash_profile file Show Sample Output
This is sample output - yours may be different.
```
$ largest
Getting top 10 largest files in ./
711M	./Havoc.2005.UNRATED.DVDRip.XviD-PuRE
719M	./Lincoln 2012
799M	./[ www.UsaBit.com ] - Here Comes the Boom (2012) BluRay 720p 800MB Ganool.mkv
950M	./Watchmen
1.2G	./Sucker Punch
1.4G	./The Buried Life
1.4G	./Stop-Loss
2.5G	./Django Unchained 2012 DVDSCR X264 AAC-P2P
 14G	./Justified Season 2 Complete 720p
 15G	./Justified Season 1 Completed 720p
```
1

largest() { dir=${1:-"./"}; count=${2:-"10"}; echo "Getting top $count largest files in $dir"; du -sx "$dir/"* | sort -nk 1 | tail -n $count | cut -f2 | xargs -I file du -shx file; }

jhyland87 · 2013-01-21 09:45:21 7
Shows size of dirs and files, hidden or not, sorted.

Enhanced version: fixes sorting by human readable numbers, and filters out non MB or GB entries that have a G or an M in their name.
This is sample output - yours may be different.
1

du --max-depth=1 -h * |sort -h -k 1 |egrep '(M|G)\s'

TerDale · 2013-02-14 08:56:56 6
List the Sizes of Folders and Directories

I wanted an easy way to list out the sizes of directories and all of the contents of those directories recursively. Show Sample Output
This is sample output - yours may be different.
```
Sample Output: 
209G    /mnt/share/data
2.4G    /mnt/share/Backups
54G     /mnt/share/Bin
4.8G    /mnt/share/Library
270G    /mnt/share/
```
1

du -h --max-depth=1 /path/folder/

ene2002 · 2013-07-09 19:56:13 105
List the Sizes of Folders and Directories
This is sample output - yours may be different.
1

du -hs /path/to/folder/*

rxd · 2013-07-13 20:22:18 8
directory size with subdirectories, sorted list
This is sample output - yours may be different.
1

du -m --max-depth=1 [DIR] | sort -nr

Paulus · 2013-07-26 07:04:41 12
Display the human-readable sizes of all files and folders in the current directory with 3 decimal places

To sort the list by file/directory size, insert `sort -n |` before `awk`. Show Sample Output
This is sample output - yours may be different.
```
   9.543 MiB	bin
   4.000 kiB	boot
  28.323 kiB	dev
  66.523 MiB	etc
 151.247 GiB	home
  17.196 MiB	lib
  17.196 MiB	lib64
   4.000 kiB	media
   4.000 kiB	mnt
   8.000 kiB	opt
 376.264 MiB	root
   4.358 MiB	sbin
   4.000 kiB	selinux
   4.000 kiB	srv
  10.098 MiB	sys
   2.693 MiB	tmp
   2.244 GiB	usr
  72.920 GiB	var
 226.903 GiB	total
```
1

du -Lsbc * |awk 'function hr(bytes){hum[1024**4]="TiB";hum[1024**3]="GiB";hum[1024**2]="MiB";hum[1024]="kiB";for(x=1024**4;x>=1024;x/=1024){if(bytes>=x){return sprintf("%8.3f %s",bytes/x,hum[x]);}}return sprintf("%4d B",bytes);}{print hr($1) "\t" $2}'

nst · 2013-08-18 02:28:18 9
Get count of kilobytes brew cleanup would free
This is sample output - yours may be different.
1

brew cleanup -n | awk '{print $3}' | xargs du -s | awk '{s+=$1} END {print s}'

jaapie · 2013-08-24 07:50:20 7
Find directories over 50MB in the home directory
This is sample output - yours may be different.
1

du -k ~/* | awk '$1 > 50000' | sort -nr

jmorganwalker · 2013-11-12 15:42:52 11
List the size (in human readable form) of all sub folders from the current location

Sorted in human readable format. Show Sample Output
This is sample output - yours may be different.
```
16K	conf.d
32K	mods-available
72K	cli
76K	cgi
148K	apache2
```
1

du -hs *|sort -h

felixhorro · 2013-11-21 10:14:47 19
Which files/dirs waste my disk space

I added -S to du so that you don't include /foo/bar/baz.iso in /foo, and change sorts -n to -h so that it can properly sort the human readable sizes.
This is sample output - yours may be different.
1

du -Sh | sort -h | tail

pdxdoughnut · 2013-11-27 17:50:11 7
List all duplicate directories

Very quick! Based only on the content sizes and the character counts of filenames. If both numbers are equal then two (or more) directories seem to be most likely identical. if in doubt apply: diff -rq path_to_dir1 path_to_dir2 AWK function taken from here: http://stackoverflow.com/questions/2912224/find-duplicates-lines-based-on-some-delimited-fileds-on-line Show Sample Output
This is sample output - yours may be different.
```
215 1320 ./hwebcam048.kopija
215 1320 ./hwebcam048
24 16 ./ac3dlx/lib/tk8.5/ttk/CVS
24 16 ./ac3dlx/lib/tk8.4/CVS
24 16 ./ac3dlx/tcl/CVS
```
1

find . -type d| while read i; do echo $(ls -1 "$i"|wc -m) $(du -s "$i"); done|sort -s -n -k1,1 -k2,2 |awk -F'[ \t]+' '{ idx=$1$2; if (array[idx] == 1) {print} else if (array[idx]) {print array[idx]; print; array[idx]=1} else {array[idx]=$0}}'

knoppix5 · 2014-02-25 22:50:09 27
Sort content of a directory including hidden files.

This command sorts the content including hidden files in human readable format of the current directory. Show Sample Output
This is sample output - yours may be different.
```
/etc/pki/tls#
0	cert.pem
8.0K	private
12K	openssl.cnf
28K	misc
1.2M	certs
1.3M	total
```
1

du -sch .[!.]* * |sort -h

krizzo · 2014-07-17 21:45:46 16
Human readable directory sizes for current directory, sorted descending
This is sample output - yours may be different.
1

du -hsx * | sort -rh

Tatsh · 2015-04-02 21:30:03 12
Recursively find disk usage, sort, and make human readable (for systems without human-readable sort command)

Recursively find disk usage, sort, and make human readable: * For systems without human-readable sort command * awk, not perl Show Sample Output
This is sample output - yours may be different.
```
   3.148 MB	 ./arch/cris/include
   3.426 MB	 ./arch/cris
   3.539 MB	 ./arch/blackfin
   4.539 MB	 ./arch/mips/include/asm
   4.543 MB	 ./arch/mips/include
   5.398 MB	 ./arch/mips
   9.543 MB	 ./drivers
  11.230 MB	 ./arch/arm
  13.852 MB	 ./include/linux
  21.820 MB	 ./include
  46.758 MB	 ./arch
  84.902 MB	 .
```
1

du -x ${SYMLINKS} -k "$@" | sort -n | tail -100 | awk 'BEGIN { logx = log(1024); size[0]= "KB"; size[1]= "MB"; size[2]= "GB"; size[3]= "TB" } { x = $1; $1 = ""; v = int(log(x)/logx); printf ("%8.3f %s\t%s\n",x/(1024^v), size[v], $0) }'

dpanofsky · 2015-08-27 23:16:25 98
Copy a folder with progress with pv
This is sample output - yours may be different.
1

SRC="/source/folder"; TRG="/target/folder/"; tar cf - "$SRC" | pv -s $(du -sb "$SRC" | cut -f1) | tar xf - -C "$TRG"

glaudiston · 2015-11-20 22:55:44 13
Find top 10 largest files
This is sample output - yours may be different.
1

du -a /var | sort -n -r | head -n 10

zluyuer · 2016-05-27 04:05:08 12
Compute the average number of KB per file for each dir

Shorter version using --tag
This is sample output - yours may be different.
1

parallel --tag echo '$(du -s {} | awk "{print \$1}") / $(find {} | wc -l)' \| bc -l ::: *

IndustrialJoe · 2018-07-05 18:33:21 270
List the size (in human readable form) of all sub folders from the current location

Simple and easy to remember. -h is human, -d1 = depth 1. disk usage, human, depth 1 Show Sample Output
This is sample output - yours may be different.
```
27M	./Stuff
808K	./Configs
1.1M	./comemierda
232M	.
```
1

du -h -d1

cbergeron · 2019-01-22 05:30:24 35
du command without showing other mounted file systems
This is sample output - yours may be different.
1

du -h --max-depth=1 --one-file-system /

Ryangillan · 2019-04-02 22:47:24 34
get total of inodes of root partition
This is sample output - yours may be different.
1

du --total --inodes / | egrep 'total$'

aysadk · 2019-07-02 09:08:35 38
Print total size of specified files and subdirectories
This is sample output - yours may be different.
0

du -sk * | awk '{print $1} END {print "[+z1<y]sy\nlyx\np"}' | dc

Xunil · 2009-02-18 22:45:22 5
Remove all directories less than 1 MB in size in or below current directory
This is sample output - yours may be different.
0

find . -type d -execdir du -sh '{}' ';' | grep -E "[0-9]+K" | sed 's/^[0-9\.]\+K[\t ]\+//' | tr "\n" "\0" | xargs -0 rm -rf

jdunn · 2009-02-20 19:44:49 14
Summarize size of all files of given type in all subdirectories (in bytes)

This example summarize size of all pdf files in /tmp directory and its subdirectories (in bytes). Replace "/tmp" with directory path of your choice and "\*pdf" or even "-iname \*pdf" with your own pattern to match specific type of files. You can replace also parameter for du to count kilo or megabytes, but because of du rounding the sum will not be correct (especially with lot of small files and megabytes counting). In some cases you could probably use sth like this: du -cb `find /tmp -type f -iname \*pdf`|tail -n 1 But be aware that this second command CANNOT count files with spaces in their names and it will cheat you, if there are some files matching the pattern that you don't have rights to read. The first oneliner is resistant to such problems (it will not count sizes of files which you cant read but will give you correct sum of rest of them). Show Sample Output
This is sample output - yours may be different.
```
sum=16173037
```
0

SUM=0; for FILESIZE in `find /tmp -type f -iname \*pdf -exec du -b {} \; 2>/dev/null | cut -f1` ; do (( SUM += $FILESIZE )) ; done ; echo "sum=$SUM"

alcik · 2009-03-05 17:16:52 8
Current sub-folders sizes

Show Sample Output
This is sample output - yours may be different.
```
32K     sub-dir1
32K     sub-dir2
32K     sub-dir3
17M     sub-dir4
508K    sub-dir5
```
0

du -sh *

haithamg · 2009-03-06 16:44:07 5
‹ First < 3 4 5 6 7 > Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

useful tail on /var/log to avoid old logs or/and gzipped files

with discard wilcards in bash you can "tail" newer logs files to see what happen, any error, info, warn...

Pronounce an English word using Merriam-Webster.com

Looks up a word on merriam-webster.com, does a screen scrape for the FIRST audio pronunciation and plays it. USAGE: Put this one-liner into a shell script (e.g., ~/bin/pronounce) and run it from the command line giving it the word to say: $ pronounce lek If the word isn't found in merriam-webster, no audio is played and the script returns an error value. However, M-W is a fairly complete dictionary (better than howjsay.com which won't let you hear how to pronounce naughty words). ASSUMPTIONS: GNU's sed (which supports -r for extended regular expressions) and Linux's aplay. Aplay can be replaced by any program that can play .WAV files from stdin. KNOWN BUGS: only the FIRST pronunciation is played, which is problematic if you wanted a particular form (plural, adjectival, etc) of the word. For example, if you run this: $ pronounce onomatopoetic you'll hear a voice saying "onomatopoeia". Playing the correct form of the word is possible, but doing so might make the screen scraper even more fragile than it already is. (The slightest change to the format of m-w.com could break it).

Display the size of all your home's directories

Display the size (human reading) of all the directories in your home path (~).

Convert number of bytes to human readable filesize

Converts a number of bytes provided as input, to a human readable number.

Instantly load bash history of one shell into another running shell

By default bash history of a shell is appended (appended on Ubuntu by default: Look for 'shopt -s histappend' in ~/.bashrc) to history file only after that shell exits. Although after having written to the history file, other running shells do *not* inherit that history - only newly launched shells do. This pair of commands alleviate that.

Plaintext credentials sniffing with tcpdump and grep

Simple TCPDUMP grepping for common unsafe protocols (HTTP, POP3, SMTP, FTP)

mix video and audio

-map 0.0:0 map the video of video.mp4 to the video of mix.mp4 -map 1.0:1 map the audio of audio.mp3 to the audio of mix.mp4 make sure that video.mp4 and audio.mp3 have the same duration

Get AWS temporary credentials ready to export based on a MFA virtual appliance

You might want to secure your AWS operations requiring to use a MFA token. But then to use API or tools, you need to pass credentials generated with a MFA token. This commands asks you for the MFA code and retrieves these credentials using AWS Cli. To print the exports, you can use: `awk '{ print "export AWS_ACCESS_KEY_ID=\"" $1 "\"\n" "export AWS_SECRET_ACCESS_KEY=\"" $2 "\"\n" "export AWS_SESSION_TOKEN=\"" $3 "\"" }'` You must adapt the command line to include: * $MFA_IDis ARN of the virtual MFA or serial number of the physical one * TTL for the credentials

Break lines after, for example 78 characters, but don't break within a word/string

Per default, linux/unix shells are configured with a width of 80 characters. If you like to edit a phrase or string on a line with more than 80 characters it might take long to go there (for example a line with 1000 characters and you like to edit the 98th word which is character 598-603). Maybe you might wish to use 78 characters, because if you forward the text via mail and the text will be quoted (2 extra characters at the beginning to the line "> "), you use 80 characters, otherwise 82, which are lame.

Extract your list of blocked images hosts from Firefox database

I use this to replicate my blocked images hosts list between work and home to keep my browsing ad-free.

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for:

» all commands
» commands with 3 up-votes (commandlinefu3)
» commands with 10 up-votes (commandlinefu10)
» commands using du

Commands using du (244) the last day the last week the last month all time sorted by date votes

What's this?

Check These Out

Stay in the loop…

Commands using du (244)

sorted by