Commands matching memory (148)

  • Apache memory usage


    4
    ps auxf | grep httpd | grep -v grep | grep -v defunct | awk '{sum=sum+$6}; END {print sum/1024}'
    empulse · 2009-04-29 17:43:52 32
  • view the system memory in clear text

    see what's in your memory right now... sometimes you find passwords, account numbers and url's that were recently used. Anyone have a safe command to clear the memory without rebooting?


    4
    hexdump -e '90/1 "%_p" "\n"' /dev/mem | less
    copremesis · 2009-05-12 16:20:57 11
  • How much RAM is Apache using?

    Display the amount of memory used by all the httpd processes. Great in case you are being Slashdoted!


    4
    ps -o rss -C httpd | tail -n +2 | (sed 's/^/x+=/'; echo x) | bc
    ricardoarguello · 2009-07-31 15:15:08 9
  • Monitor memory usage

    Monitor with watch command and vmstat, memory usage Show Sample Output


    4
    watch vmstat -sSM
    servermanaged · 2009-12-04 22:35:45 6
  • delay execution of a command that needs lots of memory and CPU time until the resources are available

    [ 2000 -ge "$(free -m | awk '/buffers.cache:/ {print $4}')" ] returns true if less than 2000 MB of RAM are available, so adjust this number to your needs. [ $(echo "$(uptime | awk '{print $10}' | sed -e 's/,$//' -e 's/,/./') >= $(grep -c ^processor /proc/cpuinfo)" | bc) -eq 1 ] returns true if the current machine load is at least equal to the number of CPUs. If either of the tests returns true we wait 10 seconds and check again. If both tests return false, i.e. 2GB are available and machine load falls below number of CPUs, we start our command and save it's output in a text file. The ( ( ... ) & ) construct lets the command run in background even if we log out. See http://www.commandlinefu.com/commands/view/3115/ .


    4
    ( ( while [ 2000 -ge "$(free -m | awk '/buffers.cache:/ {print $4}')" ] || [ $(echo "$(uptime | awk '{print $10}' | sed -e 's/,$//' -e 's/,/./') >= $(grep -c ^processor /proc/cpuinfo)" | bc) -eq 1 ]; do sleep 10; done; my-command > output.txt ) & )
    michelsberg · 2010-07-13 09:12:11 3
  • Get information on your graphics card on linux (such as graphics memory size)

    Loop is needed if you have more then one card. Show Sample Output


    4
    for I in `/sbin/lspci |awk '/VGA/{print $1}'`;do /sbin/lspci -v -s $I;done
    houghi · 2010-10-26 19:02:26 6
  • uniq without pre-sorting

    Reads stdin, and outputs each line only once - without sorting ahead of time. This does use more memory than your system's sort utility.


    4
    perl -ne 'print if !$a{$_}++'
    doherty · 2011-02-17 02:18:44 7
  • Show memory usage of all docker / lxc containers


    4
    for line in `docker ps | awk '{print $1}' | grep -v CONTAINER`; do docker ps | grep $line | awk '{printf $NF" "}' && echo $(( `cat /sys/fs/cgroup/memory/docker/$line*/memory.usage_in_bytes` / 1024 / 1024 ))MB ; done
    sammcj · 2014-09-24 04:37:01 10
  • total percentage of memory use for all processes with a given name

    This command will add up RAM usage of all processes whose name contains "java" and output the sum of percentages in HRF. Also, unlike the original #15430, it wont fail on processes with a usage of >9.9%. Pleases note that this command wont work reliably in use cases where a significant portion of processes involved are using less than 0.1% of RAM, because they will be counted as "0", even though a great number of them could add up to significant amounts. Show Sample Output


    4
    ps -eo pmem,comm | grep java | awk '{sum+=$1} END {print sum " % of RAM"}'
    bugmenot · 2016-02-10 09:00:56 16
  • Pulls total current memory usage, including SWAP being used, by all active processes.


    3
    ps aux | awk '{sum+=$6} END {print sum/1024}'
    darkon1365 · 2009-02-16 12:10:00 125
  • Show the 20 most CPU/Memory hungry processes

    This command will show the 20 processes using the most CPU time (hungriest at the bottom). You can see the 20 most memory intensive processes (hungriest at the bottom) by running: ps aux | sort +3n | tail -20 Or, run both: echo "CPU:" && ps aux | sort +2n | tail -20 && echo "Memory:" && ps aux | sort +3n | tail -20


    3
    ps aux | sort +2n | tail -20
    dopeman · 2009-03-31 12:03:34 10
  • Lists the supported memory types and how much your board can support.


    3
    sudo dmidecode -t 5,16
    Dark006 · 2009-05-22 01:17:22 9
  • Log the current memory statistics frequently to syslog

    Uses logger in a while loop to log memory statistics frequently into the local syslog server.


    3
    while true; do { $(which logger) -p local4.notice `free -m | grep Mem`; sleep 60; } done &
    Neo23x0 · 2009-06-22 00:29:53 7
  • Pull Total Memory Usage In Virtual Environment

    This command basically adds up all of the individual instances processes and gives you a grand total for used memory in that instance alone.


    3
    ps axo rss,comm | awk '{sum+=$1; print $1/1024, "MB - ", $2} END {print "\nTotal RAM Used: ", sum/1024, "MB\n"}'
    johnss · 2010-02-18 12:05:45 7
  • Quickly build ulimit command from current values

    It is helpful to know the current limits placed on your account, and using this shortcut is a quick way to figuring out which values to change for optimization or security. Alias is: alias ulimith="command ulimit -a|sed 's/^.*\([a-z]\))\(.*\)$/-\1\2/;s/^/ulimit /'|tr '\n' ' ';echo" Here's the result of this command: ulimit -c 0 -d unlimited -e 0 -f unlimited -i 155648 -l 32 -m unlimited -n 8192 -p 8 -q 819200 -r 0 -s 10240 -t unlimited -u unlimited -v unlimited -x unlimited ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 155648 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 8192 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Show Sample Output


    3
    echo "ulimit `ulimit -a|sed -e 's/^.*\([a-z]\))\(.*\)$/-\1\2/'|tr "\n" ' '`"
    AskApache · 2010-03-12 06:46:54 4
  • Updated top ten memory utilizing processes (child/instance aggregation) now with percentages of total RAM

    Prints the top 10 memory consuming processes (with children and instances aggregated) sorted by total RSS and calculates the percentage of total RAM each uses. Please note that since RSS can include shared libraries it is possible for the percentages to add up to more that the total amount of RAM, but this still gives you a pretty good idea. Also note that this does not work with the mawk version of awk, but it works fine with GNU Awk which is on most Linux systems. It also does not work on OS X. Show Sample Output


    3
    TR=`free|grep Mem:|awk '{print $2}'`;ps axo rss,comm,pid|awk -v tr=$TR '{proc_list[$2]+=$1;} END {for (proc in proc_list) {proc_pct=(proc_list[proc]/tr)*100; printf("%d\t%-16s\t%0.2f%\n",proc_list[proc],proc,proc_pct);}}'|sort -n |tail -n 10
    d34dh0r53 · 2010-03-27 01:34:50 7
  • Print number of mb of free ram

    Here we instead show a more real figure for how much free RAM you have when taking into consideration buffers that can be freed if needed. Unix machines leave data in memory but marked it free to overwrite, so using the first line from the "free" command will mostly give you back a reading showing you are almost out of memory, but in fact you are not, as the system can free up memory as soon as it is needed. I just noticed the free command is not on my OpenBSD box. Show Sample Output


    3
    free -m | awk '/buffer/ {print $4}'
    DaveQB · 2010-06-27 23:30:27 7
  • Fastest Sort. Sort Faster, Max Speed

    sort is way slow by default. This tells sort to use a buffer equal to half of the available free memory. It also will use multiple process for the sort equal to the number of cpus on your machine (if greater than 1). For me, it is magnitudes faster. If you put this in your bash_profile or startup file, it will be set correctly when bash is started. sort -S1 --parallel=2 <(echo) &>/dev/null && alias sortfast='sort -S$(($(sed '\''/MemF/!d;s/[^0-9]*//g'\'' /proc/meminfo)/2048)) $([ `nproc` -gt 1 ]&&echo -n --parallel=`nproc`)' Alternative echo|sort -S10M --parallel=2 &>/dev/null && alias sortfast="command sort -S$(($(sed '/MemT/!d;s/[^0-9]*//g' /proc/meminfo)/1024-200)) --parallel=$(($(command grep -c ^proc /proc/cpuinfo)*2))" Show Sample Output


    3
    alias sortfast='sort -S$(($(sed '\''/MemF/!d;s/[^0-9]*//g'\'' /proc/meminfo)/2048)) $([ `nproc` -gt 1 ]&&echo -n --parallel=`nproc`)'
    AskApache · 2012-02-28 01:34:58 6
  • Find processes utilizing high memory in human readable format

    Finding high memory usage report in human readable format. Show Sample Output


    3
    ps -eo size,pid,user,command --sort -size |awk '{hr[1024**2]="GB";hr[1024]="MB";for (x=1024**3; x>=1024; x/=1024){if ($1>=x){printf ("%-6.2f %s ", $1/x, hr[x]);break}}}{printf ("%-6s %-10s ", $2, $3)}{for (x=4;x<=NF;x++){printf ("%s ",$x)} print ("\n")}'
    rockon · 2012-11-27 04:29:08 11
  • Top 10 Memory Processes

    It displays the top 10 processes sorted by memory usage Show Sample Output


    3
    ps aux | sort -rk 4,4 | head -n 10
    x3mboy · 2019-09-26 16:37:33 91
  • reduce mp3 bitrate (and size, of course)

    Useful if you have to put some mp3 files into mobile devices (ie mobile phones with no much memory)


    2
    lame --mp3input -m m --resample 24 input.mp3
    Giancarlo · 2009-05-22 13:58:03 3
  • clear the cache from memory


    2
    sync; echo 3 > /proc/sys/vm/drop_caches
    lunarblu · 2009-08-20 17:28:56 7
  • Prevent overwriting file when using redirection

    If you set noclobber to on, bash won't allow redirection to overwrite existing files . set -o noclobber command turn the option on (default it s off ) . You can still append information but not overwrite the file .to turn it back off use : $ set +o noclobber . I use it because i overwrite a file by accident , after thought , content of the file was very important , creating a one more file mean nothing for my hard disk (we are not anymore on the 64 k memory time) , but content of file is far much important . What we call exeprience :( Show Sample Output


    2
    set -o noclobber
    eastwind · 2010-01-08 21:06:44 7
  • Viewing Top Processes according to cpu, mem, swap size, etc.

    I've wanted this for a long time, finally just sat down and came up with it. This shows you the sorted output of ps in a pretty format perfect for cron or startup scripts. You can sort by changing the k -vsz to k -pmem for example to sort by memory instead. If you want a function, here's one from my http://www.askapache.com/linux-unix/bash_profile-functions-advanced-shell.html aa_top_ps(){ local T N=${1:-10};T=${2:-vsz}; ps wwo pid,user,group,vsize:8,size:8,sz:6,rss:6,pmem:7,pcpu:7,time:7,wchan,sched=,stat,flags,comm,args k -${T} -A|sed -u "/^ *PID/d;${N}q"; } Show Sample Output


    2
    command ps wwo pid,user,group,vsize:8,size:8,sz:6,rss:6,pmem:7,pcpu:7,time:7,wchan,sched=,stat,flags,comm,args k -vsz -A|sed -u '/^ *PID/d;10q'
    AskApache · 2010-05-18 18:41:38 6
  • Get information on your graphics card on linux (such as graphics memory size)

    probably only works if you have one graphics card. used this: http://www.cyberciti.biz/faq/howto-find-linux-vga-video-card-ram/ as reference can be expanded, for example: lspci -v -s `lspci | awk '/VGA/{print $1}'` | sed -n '/Memory.*, prefetchable/s/.*\[size=\([^]]\+\)\]/\1/p' will just get the amount of prefetchable memory compare to: lshw -C display which does not give the size (it does give byte ranges and you could calculate the size from that, but that's a pain) Also uses a command which is not standard on linux; wheras lspci is a core utility provided by most systems Show Sample Output


    2
    lspci -v -s `lspci | awk '/VGA/{print $1}'`
    infinull · 2010-10-26 17:45:14 9
  •  < 1 2 3 4 >  Last ›

What's this?

commandlinefu.com is the place to record those command-line gems that you return to again and again. That way others can gain from your CLI wisdom and you from theirs too. All commands can be commented on, discussed and voted up or down.

Share Your Commands

Check These Out

Show numerical values for each of the 256 colors in bash
I like the other three versions but one uses nested loops and another prints every color on a separate line. Both versions fail to reset colors before giving the prompt back. This version uses the column command to print a table so all the colors fit on one screen. It also resets colors back to normal before as a last step.

Get IPv4 of eth0 for use with scripts
Simple and easy. No regex, no search and replace. Just clean, built-in tools.

Remote screenshot
Say if you're logged into a remote system via ssh and this system has an x window system, but yet you still want a screen shot of what's going on graphically. This will do it for you. :-)

list block devices
Shows all block devices in a tree with descruptions of what they are.

Check executable shared library usage
provides list of shared libraries required by executable

dump 1KB of data from ram to file

Selecting a random file/folder of a folder
random file from files in directory

Show all usernames and passwords for Plesk email addresses

shell function which allows you to tag files by creating symbolic links directories in a 'tags' folder.
shell function which allows you to tag files by creating symbolic links directories in a 'tags' folder. The tag function takes a tag name as its first argument, then a list of files which take that tag. The directory $HOME/tags/tagname will then hold symbolic links to each of the tagged files. This function was modified from bartonski's (http://www.commandlinefu.com/commands/view/10216) inspired by tmsu (found at https://bitbucket.org/oniony/tmsu/wiki/Home) with readlink function by flxndn (http://www.commandlinefu.com/commands/view/10222). Example: $ tag dog airedale.txt .shizturc weimeraner.pl This will create $HOME/tags/dog which contains symbolic links to airedale.txt .shizturc and weimeraner.pl

Append stdout and stderr to a file, and print stderr to the screen [bash]
Useful for cron jobs -- all output will be logged but only errors will cause email to be sent. NB the order of "2>&1" and ">> logfile" is important, it doesn't work if you reverse them (everything goes to the logfile, nothing left for tee).

Stay in the loop…

Follow the Tweets.

Every new command is wrapped in a tweet and posted to Twitter. Following the stream is a great way of staying abreast of the latest commands. For the more discerning, there are Twitter accounts for commands that get a minimum of 3 and 10 votes - that way only the great commands get tweeted.

» http://twitter.com/commandlinefu
» http://twitter.com/commandlinefu3
» http://twitter.com/commandlinefu10

Subscribe to the feeds.

Use your favourite RSS aggregator to stay in touch with the latest commands. There are feeds mirroring the 3 Twitter streams as well as for virtually every other subset (users, tags, functions,…):

Subscribe to the feed for: